Change mold of softgel encapsulation machine

In order to facilitate the cleaning of the softgel capsule machine for users, we took this video of changing the mold.
I hope it will be helpful to everyone in machine maintenance.
Process description:
0.00--0.02 Turn off the injector heating, put a clean towel under the injector to protect it before we change the mould
0.03--0.10 Remove the two heating rods
0.13--0.34 Loosen the screw
0.34--0.36 Press the button injector up
0.42--0.49 Remove the injector
0.50--1.05 Clean the injector and placed back into the mold box；
1.09-1.35 Loosen the screw
1.37--1.52 Remove a mould
1.54--2.11 Remove the other mould
2.12--2.23 Install the mold, the side with the letters will be placed outside
2.25--2.40 Tighten the screws
2.42--3.01 Tighten the screw until it can’t move
3.01--3.17 Lightly tap with a rubber hammer, and tighten the screw until it can't be screwed
3.18--3.24 Install the injector
3.25--4.10 Change the gear, the gear of each mould is different
4.12--4.25 Install the injector, paying attention to the alignment of the filling holes
4.26--4.46 Tighten the screws
4.48--5.03 The horizontal line of the green injector and the horizontal line of the mold are in the same line；
5.03 Turn the screw clockwise to adjust the filling
5.14--5.24 Install the two heating rods, after the heating rods are installed, put a paper plug between the two heating heads to prevent the heating tube from slipping out
5.24-- 5.28 Press the button injector up, press injector heating and feeding gelatin pipe heating
5.31--6.06 Install gelatin film
6.10--6.43 Machine running
Machine pipeline cleaning video：
• Softgel Encapsulation ...
product link:
www.autofillma...
For more details, please contact me
Ava Duan
Email: [e-mail]
whatsapp/wechat:86-13706885851
www.grand-pack...
www.autofillma...
#softgelencapsulationmachine
#softgelcapsulemachine
#softgelcapsulefillingmachine
#howtochangemoldforsoftgelencapsulationmachine
#Changemoldforsoftgelencapsulationmachine

[@ThanhLe-rf6sl]

Can I ask why the machine produces pellets so well, but the next day when drying, the edges of the pellets come out? I hope you can help