Nice job! What brand of scroll saw you got there? It seemed to do a good job. Nice shooting as well. Something I recently found out if you sprinkle a little baking soda on super glue it accelerates the cure time real fast.
Check out Gamekeeper john, catapult carnage or simple shots. Their channels have loads of imfo on band types and attachment methods. Hope that's helpful .
Good job of making a simple sling shot and spending all day making it look good, nothing new except wasting time to make it,why don't you do a video of you wiping your a!*°"ss next time
Nice sling shot
😊😊😊😊😊
Nice slingshot👌👌👍👍
Nice work
So beautiful
Beautiful sling shot what size cove bit do you use
For the round over its 1/8 inch but I now use 1/4 inch and for the band grooves it’s 4mm
Very nice and hard job!
thankyou
Nice job!
руки оторвать за такую работу
Can i use hand tools to like a file and rasp?
Yes
@@RobbieBeswick thanks
What size router bit a cove bit
🎩chapeau 👍😉
Very good
Nice
Nice job! What brand of scroll saw you got there? It seemed to do a good job. Nice shooting as well. Something I recently found out if you sprinkle a little baking soda on super glue it accelerates the cure time real fast.
ForkshooterTB it’s a record power scroll saw, thanks and thanks for the tip!
what rubber you use where you can buy
You show us 6 minutes of sanding and 0 seconds of how you attach the rubber band and what you use?
I never thought to show that part because it’s the same for any catapult. This video shows how I make my catapult frames
Check out Gamekeeper john, catapult carnage or simple shots. Their channels have loads of imfo on band types and attachment methods. Hope that's helpful .
Dolko71 because its not the point of the video
Pregunto si esta tira chinas, ó cauchera, es una invención Palestina? Han dejado de usar las hondas?
What number of sandpaper
180 grit
@@RobbieBeswick thanks
What are the names of all the sanding tools you used?
i used a sanding drum on the drill press and at the end i used a dremel
What tool do you cut the template out with
Rookie boiii the template is printed from my computer and the wood is cut on a scroll saw
Hey do you have the template for this type of frame?
ink_noob_504 no unfortunately I don’t have the template anymore because it’s a really old design
You should sell these.
Are you not selling anything on your ebay page anymore?
What is that wood?
birch plywood
Robbie Beswick poplar
मुजे भी गीलोल एेसी मगवानी हे किया रेट तक मिलेगी
How to create pfs ?
fakhri hidayat it would be the same process with a different template
@@RobbieBeswick what size for pfs in centimeters?
Why would you even want a pfs? They ain't really slingshots lol
Gỗ gì vậy
Birch plywood
All I have is a knife... How am I supposed to do that??
Lupul Alb try to make it using a knife, that would make an interesting video
You are going to have to borrow at least a coping saw, but a scroll saw is a lot easier even if a little expensive.
Jigsaw does the same job just takes a bit longer and a dremel basically only 2 power tools you should need
👍👍👍👍👍👍👏👏👏👏👏👏
নাইস
Got your fingers very close to that router bit, so close it made me cringe.
Ray Tillman I’ve been doing this 5 years and never got injured
Vsiiii
Helo
маструбация
Wjhsiggegeyeyshjhheykgehgehy
helo
Slingshot competition th-cam.com/video/3IQ2jQiPzBI/w-d-xo.html
Good job of making a simple sling shot and spending all day making it look good, nothing new except wasting time to make it,why don't you do a video of you wiping your a!*°"ss next time
You are not obliged to ‘waste’ your time watching this video
Nice