How to Fix a Sagging Fence Gate | Ask This Old House
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- In this video, This Old House general contractor Tom Silva helps a homeowner solve an all-too-common issue: A sagging fence gate.
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse.
General contractor Tom Silva heads out on a house call to help a homeowner solve an issue with a sagging gate. After excavating, Tom reinforces the gate’s post with some expanding foam. Then, he takes the gate and racks it back into shape before attaching custom-made brackets. Finally, Tom and the homeowner hang the gate and call it a day.
Skill level: ⅖
Cost: Between $50 and $150
Time: 4 hours
Where to find it?
Tom repaired the fence using some basic tools, including a post hole digger [amzn.to/38jZaee], a staple gun [amzn.to/3NRWLrJ], and a drill driver [amzn.to/3DGarBr], which can all be found at home centers.
To straighten the fence posts, Tom used Sika [usa.sika.com/] Fence Post Mix [amzn.to/3KfbN8H].
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: www.thisoldhouse.com/pages/st...
Materials:
Expanding foam for footings [amzn.to/3KfbN8H]
Boards for supporting post [thd.co/38qW0FA]
Wood corner supports [thd.co/38qW0FA]
Exterior wood screws [thd.co/38vj5qF]
Tools:
Impact driver or screw gun [amzn.to/3DGarBr]
Shovel [amzn.to/3v16u6l]
Post hole digger [amzn.to/38jZaee]
Level [amzn.to/3LOb2DH]
Tape measure [amzn.to/3v3Wqtd]
Long pipe clamp or ratchet strap [amzn.to/3unOwM0]
Framing square [amzn.to/3xahNM3]
Staple gun [amzn.to/3NRWLrJ]
About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. ASK This Old House helps you protect and preserve your greatest investment-your home.
Follow This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
How to Fix a Sagging Fence Gate | Ask This Old House
/ thisoldhouse - แนวปฏิบัติและการใช้ชีวิต
Tom makes everything look so easy. I might have taken similar steps but there would have been a whole lot more cursing, some yelling, 5 trips to the store. Then defending myself to my wife all night on how I wasn't mad, its just part of the process.
Ah, the good old measure twice, cut once, say oh crap three times, then run back to the hardware store.
“I wasn’t mad just part of the process “. I’ll have to use that one when I’m opening up the pool next month
😆 🤣 😂 So, what you're saying is your a normal man! 😀😃🙂🙃 All the rest of us would do the same thing!
Bill burr
Most honest comments I’ve read on these videos LOL.
I like it when toh does relatable videos like this instead of the multi-million dollar projects.
The brackets in the corners was an excellent idea.
I am a lucky sister to have a brother that knows so much and has rebuilt my old house into a nice home and even though he is 72 years old he helps me on anything I need done.
Your parents have raised you guys well - a skilled brother who helps his family and an appreciative and thankful sister.
I do for my older sis, any job she needs. But she also has a handyman doing her bigger jobs. I'm 71.next months, God willing. ❤😊
His wife is a lucky woman to have a man who knows how to do lots of things around the house
Tommy is such a legend. I wish I had a fraction of that mans skill. Great video guys.
He has forgotten more than most will ever know. Tommy is the Betty White ot construction; Very rarely do you find a person that both amatures and professionals alike agree on their knowledge and ability.
@@michaelcasey31 so true. I wish I had a father or grandfather like him. He is a national treasure that is irreplaceable
Tom is a national treasure. Protect him at all costs.
Tom came out of the womb with a speed square and chisel.
Tom certainly knows what he is doing.
I’m loving the dad shorts and socks with sandals tommy. Lol. Classic dad outfit.
Tom Silva is a treasure!
Tommy, You are sure a welcome site to us out there wondering how you are doing. Looks like you’re doing great AND still helping us homeowners with little DIY repair projects. On this one, I especially liked the custom inside braces you made! Thanks!
Thanks so much. Just the info I needed out here in Nebraska. Tommy is a wealth of knowledge and wisdom.
What a nice job! ❤️ Those corner brackets match the gate style perfectly. I never knew about the foam stuff. I need to remember that for when I reset my mailbox post. I've been a fan for many, many years. I'm happy to know you guys are still out there helping people learn how to do home improvements. Thanks for sharing and for teaching me something new! 👍 😊
great skill set combine with years of hands on experience, nails it with the right sequence of do's
I remember watching This Old House on PBS when I was a kid in the early 90s. We recently bought a home that was built around the same time and I am so grateful that these videos exist because they have saved me tens of thousands of dollars on repairs.
GREAT VIDEO!!!
I’ve been putting off squaring two big sagging gates and Tom’s corner details is something I hadn’t thought of but is the perfect structural fix to the sagging problems!!!
Thanks so much from Canada.
The two part expanding foam is a slick solution. I've never seen that one before, but will sure use it in the future for this kind of repair. Thank you. Tom, you always make difficult tasks look easy.
I won't ever use that expanding foam again, definitely not for a fence post holding up a gate. Reason I say that is I used it for a mailbox post and the box got bumped slightly and the foam compressed a bit and the post was no longer solid in the ground. I can't imagine it lasting that long for a post holding a gate that is opened and closed a lot.
Just use a quick set concrete it will outlast that expansion foam .
One thing you should be sure to do if you use the foam is to pour it onto the post, otherwise it'll expand onto the post but not bind to it. The extended directions on Sika's website are pretty explicit about it, but I don't recall if the bag mentions it, too.
Expanding foam is not a quick fire solution for all fences.
If your fence posts have to endure the wind beating against a closed leaf panel, then the foam will compress laterally. That wind can force your fence and attached post back and forth like you were shaking it. In concrete it would never move except with the natural give of the wood. In foam the tiny air pockets collapse as the cell walls rip and tear, making millions of tiny void spaces held in tension by the trapped air, a larger pocket, with air escaping and the pockets permanently deformed. Rendering what the foam was holding no longer tightly held.
A second point. Not all foam is created equal. If foam is desired then choose one that as it stops setting, does not shrink. Foam undergoes a reaction to set that involves heat that causes foam to expand. When it cools, it does not shrink, but rather deflates. This can result in the inner holding area of the foam to shrink into its center mass which if you imagine a doughnut, it not where the center hole is, but in upon itself. So it will loosen its grip on the post it’s holding and the wall of the hole you dug and poured the foam into.
Foam can be used, but if the work you are doing is intended to be placed under load, outdoors in weather conditions that you need your posts to resist… foam is not the best choice.
@@IzzyCraft Thanks for mentioning that. I thought the foam stuff was cool but now I'm re-thinking concrete is the tried and trued way to go.
This Old House 🏡
Tom is a legend,
true professional
Master Builder
🧰🔨🛠️📏📐🗜️
Blessings 💯
Great fixes and very economical. Enjoyed watching as always.
Tommy is awesome. I would love to get to meet him and the rest of the crew one day.
I have the exact same gate problem at home. What an awesome video.
Thank you! I wanted to use foam for the same exact use thank you again Tommy!
Great job Tommy!
This show always very educational thanks Tommy!!
Tommy is a true master of his craft.🙂👍
Another job well done. Sometime all you need is the knowledge. Keep up the great work.
The expanding foam was an interesting trick. I always enjoy videos with Tom.
I have used those foam when I replaced my mailbox post instead dealing with concrete
Would have loved to have heard more about the foam, why, brand, how etc
It's not a trick, just a product. Otherwise you can call everything a trick.... toilet paper, laundry detergent, the vacuumcleaner.. But i think the weight of concrete is what makes a good foundation, foam is exactly missing that.
@@Engineer9736 ... if you are not in a hurry, you can dump a half bag of dry gravel mix into each post hole and add some water after the fact. Ground moisture will do the rest and the following weekend you can hang the fence. Now you have the added weight, the added size of the concrete, and no sloppy concrete to clean up.
Used the expanding foam on posts for my deck last summer. It was perfect for what we needed to do. Recommend that product he used very highly and it's very easy to use once you get used to it.
All these guys on TOH make things look so easy because they are so knowledgeable. I wish Norm Abrams was still doing New Yankee Workshop he is another master craftsman.
Tommy is the MASTER
Nice job, Tommy!
Timely release for this video. I just so happen to be doing some gate repair here too.
Love watching Tom videos.
Thank you for this, helps in my problem fix
Could watch Tom work all day.
I wish Tom came to my house and fixed all my problems with a smile and a handshake
nice work tommy
Tommy is awesome.
Tommy, you are a master!
Nice job Tommy! As always
A pro to aid us week end father's. Trying to find 4.75"X4.75" vinyl post for my three rail horse fence.
Dang they had Tommy putting in the work for this one!!! Great job! 🔥💪🏼💪🏼
Yeah fence post digging is not easy task.
Looks like the old man knows what he is doing 🤞 and the best part I liked apparently he fixed for free 😜 cuz he only shake hand and said was glad to fix it . Didn’t said here is you bill or you owe me this amount 👌😜🤣
thanks for the instructions! awesome information
Thanks Tom, that was great!
Awesome video's as always! 💯💥👍☝️
Add the brackets to the web of the fence for uniformity. Sealing the fence might increase the useful life.
Love these videos
Tommy is close to a national treasure. But Kevin might have something to say about it 😆
Tom, you know best. I really like that expandable foam material. I haven’t seen it around my area, We have clay soil and moisture problems on fence post bottoms. My approach has been to coat the in-ground portion of wooden posts using asphalt and then wrap them in aluminum flashing to protect against moisture and rot - especially at the soil line. The coated and protected portaron is then cemented into the ground, leaving about 4-inches of the coated portion above grade. That seems to give long life to fence posts in our type of soil.
In you application, I think it might have been good to have made a wrap from flashing - all the way to ground level - and then pour in the foam stuff - and top with some cement and TLC sloping of the cement to avoid standing water around that post. Enjoyed your demonstration. BTW many years ago I think you and the TOH crew were at the beach bar at the Fountainbleau Hotel in Miami Beach?
GREAT JOB
Love this channel ❤️
good ole pops!
Nice work.
Gr8 work Tommy
I'm not sure if this is in any way correct and probably not the best way to set posts but years ago I set some posts by shoveling dry Quick-Crete and gravel in the post hole around the posts for a chicken wire fence and then I just added water and left it. The posts lasted 20 years before rotting at ground level so I guess it was an ok way to set them, huh? 😄
I'm always amazed, Tom and my brother could be mistaken as twin brothers! Looks and body stature. In fact, my brother is also a contractor too.
The house side gate post with the blocking: anybody know to what that through post bolt is attached? Tommy mentions concrete, I assume concrete wall? Doesn’t seem likely he drilled the masonry, then bolted through the post. Cmon TOH, that’s a big skip.
Ah. Now I see this just a standoff, to stop the post from leaning towards the house. With a new gate and reset hinge post, the febce can be made push wedge tight against the house
Tommy is the GOAT
how do you make one strong enough that it wont sag when all 4 of my nieces and nephews ride the gate at the same time?
build the whole gate out of steel
Add a diagonal cross brace. Obviously.
@@GrahamDIY lol i did...
@@GrahamDIY r/wooosh
Take pictures/vids of the kids swinging on the gate..... let it sag.... take more pics/vids.... You'll love those pic/vids a few years from now:) Fix that gate later....:)
It amazes me how many home owners dont know how to do simple repairs, like resetting a fence post or replacing a outlet or faucet
I think you can speed the weathering by using vinegar. I remember seeing a video a while back where people would spritz an apple cider/steel wool solution on wood to oxidize (and grey) it faster.
That’s a cool process, but fair warning it can go more black than gray. Especially when dealing with oak
@@TheChupacabra One could mitigate the darkening risk by a dilute solution of the resultant oxidant but yes, I agree. Takes a bit of work to predict with accuracy how the wood will respond. It might look good today, but it might look ghastly in a year.
Leaving it to the UV radiation and weathering seems to be the safe route.
@@ALAPINO when you say oxidant you presumably mean iron acetate as opposed to the acetic acid?
Still tricky to guess effect from calculating concentration of reagents. Think your best bet is to test on a hidden area (and heat if needed, depending on season)
@@TheChupacabra It's been a long time since chem, but I think my main point should have been more clear as I am a layman: go with a weaker anything. Or yes, absolutely, test on scraps.
Personally, I'm not all that a fan of ferric acetate stains for outdoor projects. They just don't ever seem to weather in a pleasing way. But obviously, that's just my experience on the east coast with our species' and our weather.
In this case, since the homeowner called TOH to square a gate and reset a post I don't think he's going to care about waiting for Tommy's repair to weather in. (Frankly, it looks great as is)
Oh crap, got to check my mail box post, it's been shuffling around!
The is excellent person
7:45 thank you Tommy. There’s the door!
One day i will own my own gate…
do you use the same concept when the post has been installed in concrete slab instead of dirt?
Has anyone ever witnessed a genuine smile on Tom's face !
Mr. homeowner looks like one of the characters of an episode of PBS' Inspector Lewis.
Of course Tommy has the socket adapter for his PDC
I think I see the problem with the gate post, no concrete! Id recommend thru bolting those hinges as well. Gotta go.
Silly question but his bolt through the left post into the bracket he cut….did it also go into the wall? What is keeping it tight when the gate is open and not leaning in?
Can metal shelf brackets be used up in the corners?
Yoda to Tom: "You must pass on....what you have learned."
Tommy feels like that great uncle who teaches you how to fix your carburetor and gives you your first beer at 18 while you watch the Bears - Packers game. Good ol uncle Tommy, he was a goodfella.
Geez Tommy, when did you SHRINK?😁😁
Wish your videos were longer 🥺
This old gate.
The gate and my ex have a lot in common.
I just saw this video few days ago.
I am curious as to why Tommy didn't incorporate the use of some adhesive in holding the gate square. And the foam, very short term solution. To last 8-10 more years concrete would have been a better choice.
Is the Belemier drill good?
Love these videos, he just goes to randoms people's houses and fixes their shiz lmao
Hi I'm really hoping you could help me. I love you guys use to watch your show every weekend.. I'm building a hope chest for my daughter from oak and outdoor planters for my son with old pallets. I was wondering which glue to use.. I was going to use gorilla for the all pieces but now I'm second guessing as there is so much negative reviews about it. I hear titebond might be okay but its very expensive and for the life of me I cant find it anywhere right now as its sold out in Canada where I am ... much appreciated please and thank you
Karen, the TOH web team rarely reads or replies to comments but I can try to help if you'd like.
Gorilla glue (normal stuff, expanding polyurethane glue) is decent stuff when used correctly and on the right applications. I find it just expires quickly and I suspect bad reviews are from misuse or an expired bottle. Also, by its expanding nature, it's messier than traditional wood glue.
Now, having said that, according to testing done by wood engineering nerd Matthias Wandel: wood glue made by Gorilla brand performs well. He's in Canada as well, so availability for him should be relatively similar to you. If you have a little time I recommend watching Matthias Wandel's video from one week ago entitled, "Which glue is strongest? Testing with my computerized tester." and Project Farm's video entitled, "Which Wood Glue is Best? Let's find out!..."
You can skip to the end to see a summary of their findings in both videos or watch in full to see the test samples as they are tested. You can form your own conclusions for your own needs with the information contained in those two videos. Significantly more important than someone you don't know tell you stuff here in the comments. Seeing the data also helps you retain that information more than just a blind recommendation.
Also, you might see a product that performed well and you know is inexpensive and available in your market as oppose to me telling you X is great but you only see Y in the shops.
For the hope chest, any quality wood glue will work. Titebond was always expensive in Canada, and, in my opinion, the only one to splurge on is the Titebond III due to it's water resistance. Titebond I is normal wood glue. Titebond II is water resistant. Titebond III is "waterproof" but in actuality is just 'very, very water resistant.'
A planter box outside is in a harsh place. Compounded by the material: Pallet wood is often treated in a way that sometimes interferes with good glue ups (if it feels chaulky, oily, or waxy). If you're relying on only glue it will eventually fail from the sun's UV rays, from moisture in the soil, from weather, mechanical forces. I don't think any wood glue would stand up long enough. Mechanical fastening would be, in my opinion, superior to wood glue in that situation. Choice of fastener is really up to your intended use for the planter box.
I hope any of that is of any help.
Good luck, Karen!
One thing I don’t understand is why he didn’t put the expanding foam higher up on the post
And why not sanded and stained it as well
"I beg to differ. Happy Gilmore achieved that feat less than an hour ago."
"Well, moron, good for Happy Gil-oh-my-GOD!"
Hahahaah I was thinking the same thing. “WHOA is Gandalf tall or Frodo short?!”
Also it’s funny to picture this guy, I neeeed help Tommy please!!
Shouldn’t he just make a fist, raise it over his head and bring down the force of Thor’s hammer into the top of the post. 6 inches shorter, but now a rock solid post.
@@TheChupacabra -- Great minds think alike.
Tommy! saves the day 💪#canwefixit
ya know tommys old school when he puts a huge lag bolt in with a drill instead of impact driverp
That was painful to watch on the lag, but him driving those deck screws into the gate with underpowered cabinet drills makes a lot of sense...you get more control.
@@cup_and_cone Yeah that is true, a big 18v impact wouldve pulled the screw through the gussets
But i spose if i were paid to use free festool drills ide power my car with them
I’d suggest not topping the post hole with dirt. It will speed up the post rot. I’d put in enough foam to come above ground level, and then use a knife or something to trim and taper the top foam away from the wood so water drains away toward surrounding earth.
It's actually a nicely designed gate. The original carpentry was not very good though.
👍👍👍👍👍👍
Wet the blocks and then rub a little dirt on them and you have instant aging.
“I cut this block to fit the conner of the house…”
What’s the conner?
Tommy loves jorts!
Omg that show is still a thing
Love 💓 you All viewed
I'm tiles master
I see the ease of the foam but what about longevity?
Foam will outlast the life of the post... Telephone poles are set with similar expanding foam.
@@cup_and_cone the only case I’ve seen of this was in a video sponsored by the foam company. And it looked a little bouncy when climbed. Anybody else use this in the field for real?
Yes many maybe most fence posts are done w foam set now. Maybe not good enough for foundations but fine for post.
@@TheChupacabra if it was really cured, then the bounce was the surrounding dirt moving, not the set fo.
Bridle joint* 🙈
i usually buy a new house when my gate sags.
HI TOH , that's a nice looking fence & gate " especially with the lattice look , if that was my fence I would paint it with redwood stain ! 👍😊
Hate it!!! :) Once you paint it, you will ALWAYS have to Repaint it, sometimes, every year....
And with 12% inflation the new fence will be 38.000 dollars in 10 years time