At 6:00, what are you doing with the tool please? Why do we have to do the test? If I don't have the testing machine, is there an alternative sokution?
Hi! Bro I'm facing a problem in the final step as the motion of pointer with arrow keys is not working and also the pointer is not going to home point when 'h' is pressed please tell men the solution to overcome the problem
bro x axis is working but , y axis is not working(small movement is happening ) ..........both motors are in working condition .....pls help me to sove the problem
sir , I made it completely and it works well the only problem is that it shows an ERROR M18(drives off ), Command not recognized : M18 ..HOW to solve this .? plzz help..
Hlo sir please help me. On uploading gcode file on gctrl it run but at last it shows command not recognise m18 drive off.sir how to solve this plz reply me.
Hey i want to make a cnc number printing plotter machine, problem is that, when i want to print a number using stepper motors then i upload my Gerber file when it works, but when i want to change my printing number then again go to pc, and chnage the Gerber file then upload, my work is not so great, i just want to print some numbers using stepper motors. so Arundio IDE have any library to without using Gerber i change my number from keypad and display. This is my collage project, please TH-cam help me,
Hi, dear friend. Can you help me, please? I can not send g-code to cnc. I start gctrl in Processing and see ERROR in string 31: frame cannot be resolved to a variable. What i have to do?(((
Very good video! I have a question, I tried the program testMotors with a power supply of 9v, 500mA and I see that the stepper motors heat up a lot, I would have to try another source or is it something else?
Very Nice Effort! Can I know how to do this without L293D Motor Driver Shield? I do have two small L293D ICs Can utell me where to give the external power supply? Thanks in advance!
problem is the axis and supporting structure won't have the strenght to stand a drilling action; you will need stronger stepper motors, heavy duty servo and thick stell rods in order to drill (and take into account all the vibrations produced by rotating head and forces when pushing against the material i.e. wood, pcb, plastic, etc).
My project doesnt work properly can you please help me this is school project. The first thing there is a problem with invalid conversion char to char. Then the arrow keys dont make the project move backwards and fowards.
I have same plotter after seeing your video writing machine based on G CODE. iam download some examples G CODE images working well but own G CODE images not working iam inksape using 0.92.5 G CODE images not saved in mm but save px please help me
Bhai maine 2 saal pehle aapki video dekh kar cnc machine banayi thi par wo proper work nahi kar rahi hai Maine bahut sabhi codes upload karke aur 4 5 bar hardware setup bhi change karke dekh liya fir bhi work nahi kar rahi Mai cnc se related nayi nayi video dekhta rehta hu taki koi solution mile par abhi tak koi solution nahi mila muhje lagta hai codes me hi koi problem hai please help
I created this project..but my drawing is not working properly but my servo works properly... Can you share your project coad that u use? Or i wanna contact with you...(Mujammal Haque)
Hey..actually I need a help from you i made mini cnc 2d plotter by watching your video but it's not able to work. Actually we tested the components and they are working but when we connect it on laptop while running the code it's not working.Will you be able to help us
Sir I can't generate g-code file in new version of Inkscape so I watched your video and use v 0.48 Inkscape then I can get g-code but there was created another problem it show an error M18, help me please
I am facing this problem while compiling the code.what should i do now?? C:\Users\Asus\OneDrive\Documents\Arduino\CNC\sketch_mar12a\sketch_mar12a.ino: In function 'void processIncomingLine(char*, int)': C:\Users\Asus\OneDrive\Documents\Arduino\CNC\sketch_mar12a\sketch_mar12a.ino:224:20: warning: invalid conversion from 'char' to 'char*' [-fpermissive] indexY = '\0'; ^~~~ Sketch uses 9330 bytes (28%) of program storage space. Maximum is 32256 bytes. Global variables use 479 bytes (23%) of dynamic memory, leaving 1569 bytes for local variables. Maximum is 2048 bytes
At 6:00, what are you doing with the tool please? Why do we have to do the test? If I don't have the testing machine, is there an alternative sokution?
8:37 software part starts..❤
Is it possible to create a gcode to draw diagrams on a PCB without a stroke, so that it would trot with one line?
Hi! Bro I'm facing a problem in the final step as the motion of pointer with arrow keys is not working and also the pointer is not going to home point when 'h' is pressed please tell men the solution to overcome the problem
Is the problem fixed?
can it draw single lined drawing? it draws two lines to draw a drawing.
very nice, but why didn't you take out the lasers?
How did u control the axis using keyboard
bro x axis is working but , y axis is not working(small movement is happening ) ..........both motors are in working condition .....pls help me to sove the problem
Posso usare un meccanismo ottico per lenti laser SF-HD850??
sir , I made it completely and it works well the only problem is that it shows an ERROR M18(drives off ), Command not recognized : M18 ..HOW to solve this .? plzz help..
Hi sir, is this works correctly!!
What cnc shild are you used in
i have a 9V 0.6A Adapter for Modem… can I use it ?
Hello. is it possible to create this system with STM32?
Y axis refill drop?
Hi MI thanks for the video
How much ampère the power suply affiche
This a real fun project!
How to get plotter codes,please explain little bit.
Can i use CNcC sheild v3 ?
Very nice...and best easy assembly shown..
Will be more happy ,if able to see how g code practically uploaded..
Hlo sir please help me. On uploading gcode file on gctrl it run but at last it shows command not recognise m18 drive off.sir how to solve this plz reply me.
Hey frinend I am facing the same problem how did you get around it
I want to make it over voice control.
Will you help me ??
Can i program with mobile
We can also use nema stepper motor instead of dvd drivers?
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
una pregunta pasa algo si le conecto un cargador de movil de 5V y 2 Amperes?
No funcionará, yo hice la prueba y nada
Amigo tu l9 hicistes me puedes ayudar me puedes vender uno listl y la informacion del programa soy de medellin colombia
Sir I used your cnc code everything is OK but z-axis servo motor always vibrating, please help me to get rid of this problem
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
Sir its always shows command not recognised please help.
Make this th-cam.com/video/tSMQgoMC3hY/w-d-xo.html
Can i control with Android mobile
Can you provide the code for ardiuno ide
Hey i want to make a cnc number printing plotter machine, problem is that, when i want to print a number using stepper motors then i upload my Gerber file when it works, but when i want to change my printing number then again go to pc, and chnage the Gerber file then upload, my work is not so great, i just want to print some numbers using stepper motors. so Arundio IDE have any library to without using Gerber i change my number from keypad and display.
This is my collage project, please TH-cam help me,
Hi, dear friend. Can you help me, please? I can not send g-code to cnc. I start gctrl in Processing and see ERROR in string 31: frame cannot be resolved to a variable. What i have to do?(((
Hey frinend I am facing the same problem how did you get around it
@@اسلامسعدمحمدقطبi won it about year ago and i just can't remember how((( Sorry, bro.
Sir motor ki wirring kerte sme uski poliriti change ho gya ,to motor kharab to nhi hogi agr
No bro
Thanks sir
ab mera bn gya
Sir aap bahoot sare diagram ke gcod bna kr upload karo
Kyuki mere ko wahi dikkt aati hai😅
@@PardeepKumar-gw5ow mail me-rashinkarkashmira9@gmail.com
I built a similar sized Arduino based plotter for spheres like ping pong balls. You might like it :)
Very good video! I have a question, I tried the program testMotors with a power supply of 9v, 500mA and I see that the stepper motors heat up a lot, I would have to try another source or is it something else?
Ur power suppy is good enough and stepper motors r getting 5 volts only,
That means there is something wrong in motors...
Sir i wanted to make this project how can i get help?
hi my friend
I have windows 10 32 bit dir how do I install inkscape
Can you please give code for ardiuna ide
Very Nice Effort!
Can I know how to do this without L293D Motor Driver Shield?
I do have two small L293D ICs
Can utell me where to give the external power supply?
Thanks in advance!
The project is very good and my question is, it can replace the pencil for a minidril?
Here is sphere bot www.etsy.com/listing/488711737/easter-eggs-decor-eggbot-ball-drawing?ref=shop_home_active_1&frs=1
problem is the axis and supporting structure won't have the strenght to stand a drilling action; you will need stronger stepper motors, heavy duty servo and thick stell rods in order to drill (and take into account all the vibrations produced by rotating head and forces when pushing against the material i.e. wood, pcb, plastic, etc).
My project doesnt work properly can you please help me this is school project. The first thing there is a problem with invalid conversion char to char. Then the arrow keys dont make the project move backwards and fowards.
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
Can we replace the pen with driller?
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
I need one how to get
Anyone please tell after making it, how to start writing
What is the the software that you used for dressing the picture??
Inkscape
Is this a plotter or a printer ?
I have same plotter after seeing your video writing machine based on G CODE. iam download some examples G CODE images working well but own G CODE images not working iam inksape using 0.92.5 G CODE images not saved in mm but save px please help me
What pages did you use? Tell me please
Bhai maine 2 saal pehle aapki video dekh kar cnc machine banayi thi par wo proper work nahi kar rahi hai
Maine bahut sabhi codes upload karke aur 4 5 bar hardware setup bhi change karke dekh liya fir bhi work nahi kar rahi
Mai cnc se related nayi nayi video dekhta rehta hu taki koi solution mile par abhi tak koi solution nahi mila muhje lagta hai codes me hi koi problem hai please help
Are u electrical engineer or machenical engineer or other
engineer? C'mon! What he's making well IS NOT ROCKET SCIENCE! C'mon!
Very nice project 👍
Which apps that you use with this machine?
Thanks a lot
Inscape app,processing 3,arduino IDE u can watch my videos on cnc
Sir i have created this machine. everything works fine but the servo motor isn't up and down. how to solve this issue?
plz help me.
I created this project..but my drawing is not working properly but my servo works properly... Can you share your project coad that u use? Or i wanna contact with you...(Mujammal Haque)
@@md.ashrafuzzaman3506 bro plz watch my video I have ckeard all the problems
@@md.ashrafuzzaman3506
th-cam.com/video/FAfSdJl4HiI/w-d-xo.html
Cant we make with arduino nano?
Yup
Hey..actually I need a help from you i made mini cnc 2d plotter by watching your video but it's not able to work. Actually we tested the components and they are working but when we connect it on laptop while running the code it's not working.Will you be able to help us
Olá Amigo Montei a cnc e não concegui fazer funcionar instala tudo certinho e não tem comando.
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
Hola 👋, la parte de encima del arduino donde la consigo?
Hola
Sir I can't generate g-code file in new version of Inkscape so I watched your video and use v 0.48 Inkscape then I can get g-code but there was created another problem it show an error M18, help me please
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
Please give the code
Hello sir problem kase karna h
Can I get sources code for arduino
Why you dont use common printer ?
can't i do this with nano
No
code was not working please fix it
I want the code please
Where are you live plz comment
hi... lnks to download arduino code is dead... could you reupload please?
thanks
make this th-cam.com/video/tSMQgoMC3hY/w-d-xo.html
Sir kindly tell me aurdino code
Thanks innovative you helped a lot.
no it didnt help
Very Nice Effort!
Can I know how to do this without L293D Motor Driver Shield?
I do have two small L293D ICs
Thanks in advance!
Oh I was too late to see ur reply on your website... Sorry... Really sorry
hey i do this without a cnc shied check it out i use L293D ic is working u can ask question thanks to mr innovative😁
@@diycraftph858 OK... Thanks!
Good
I am facing this problem while compiling the code.what should i do now??
C:\Users\Asus\OneDrive\Documents\Arduino\CNC\sketch_mar12a\sketch_mar12a.ino: In function 'void processIncomingLine(char*, int)':
C:\Users\Asus\OneDrive\Documents\Arduino\CNC\sketch_mar12a\sketch_mar12a.ino:224:20: warning: invalid conversion from 'char' to 'char*' [-fpermissive]
indexY = '\0';
^~~~
Sketch uses 9330 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 479 bytes (23%) of dynamic memory, leaving 1569 bytes for local variables. Maximum is 2048 bytes
Hey frinend I am facing the same problem how did you get around it
can you share how to make pen
make this th-cam.com/video/tSMQgoMC3hY/w-d-xo.html
@@_DarkKnight Thanks
Your coad is not working please give me that coad
This is a Daniele Tartaglia's project. Please make credits.
Looks you are new on TH-cam 🤔
please give working g code..
Please tell me arduino and next one you give me
Great project 👍 👌
Sir ji software and programming upload ka bhi simple sa video bana do
Very nice effort!
Can u PLZ help me know how we can reduce its sound...? Thanks in advance!
We can't reduce
@@arduinorobotics9512 Can you please tell me how to do so? Thanks!
@@raahimirfan5996 by giving less than 5volt (4volt)
@@raahimirfan5996 and bro plz watch my video once on cnc
@@arduinorobotics9512 OK thanks a lot!
Sir i want to contact with you please reply me
Ingenioso amigo quiero hacer uno sera q me lo puedes enviar a colombia y cto vale Dios te bendiga
The code is not working
th-cam.com/video/PQpBz1i-mDI/w-d-xo.html
Code
yeah u did
Can u sell it to me brother i can pay you
How much it costs
Ahhh heating problem!
Oh come on cud of made the draw mechanism work lol
Broo any contact
nice
Amazing 👍
Mr innovativ can't reply for problems .
machine bhadyane de
Thx u so much
Thanx
impossible
OK
Ingenius!
mast
Doraemon
Da
tuyệt vời
Op
Only open source project.. try to find unique one ..