Nowhere in your videos on soft starters do you show how to wire the 2 wire connection for start and stop. I am using a remote control to turn on and off the machine so I have a 120VAC output as a signal to the soft start to start or stop. I also cannot find anywhere what signals terminals 1 through 12 are looking for. I have the unit sitting on my bench now and this information is not even in the manual. Also your 2 different videos show different wiring for the terminal 1 and 2 wiring to the bypass relay
@@daneiserman908 I have since figured all this out. The product itself works great but the instructions are awful. If I can help you please let me know.
@@michaelmeisman4731 Hey Mike good morning, No sir I have not figured it out. I also am using remote start 100hp and 200hp motors.Any help would be greatly appreciated.
@@michaelmeisman4731 If you can please help me it would be greatly appreciated. I am trying to remote the drivr also, I have not been able to figure it out.
Good performance.this video is talking about the line to line and wiring diagram showed
How would i use the contactor if I did not have a neutral?
Nowhere in your videos on soft starters do you show how to wire the 2 wire connection for start and stop. I am using a remote control to turn on and off the machine so I have a 120VAC output as a signal to the soft start to start or stop. I also cannot find anywhere what signals terminals 1 through 12 are looking for. I have the unit sitting on my bench now and this information is not even in the manual. Also your 2 different videos show different wiring for the terminal 1 and 2 wiring to the bypass relay
Thank you I am the only one who cant get answers.
@@daneiserman908 I have since figured all this out. The product itself works great but the instructions are awful. If I can help you please let me know.
@@michaelmeisman4731 Hey Mike good morning, No sir I have not figured it out. I also am using remote start 100hp and 200hp motors.Any help would be greatly appreciated.
@@michaelmeisman4731 If you can please help me it would be greatly appreciated. I am trying to remote the drivr also, I have not been able to figure it out.
VFD की कंट्रोल वेयरिंग पे भी वीडियो बनाए
Great video information 👍 thanks for sharing your knowledge ♥️🇵🇭
HOW'S THE PROGRAMMING IN SOFT STARTER?
HOW TO PROGRAM THE input and output?
Boss me i ask how many seconds before bypass contactor activate?
Soft starter me kha uoj hotahe
If not install bypass contactor, what the effect?
It will not work as the soft start shuts off current flow and reroutes it to the bypass contacter.
Can we use soft starter with star delta bypass?
Yes you can, it has RS485 port.
Sir isi tarah Schneider altistart ka diagram bhi bataye ATS22C32Q
what about 3 & 4 no. terminals used for? Can be used for PLC feedback?
They are delayed closing contacts and can be used at the input of the PLC.
Where can buy soft starter in chennai
This link, www.ato.com/softstarter
If you speak then video is perfect
🤔 maybe Tesla needs this soft start
maybe....
Hadir
Very nice! )
Can I take 3 phase 380v from the output of the inverter to supply it to the soft start?
Is your inverter used to adjust the motor speed (VFD)?
Or is it just a DC-to-AC device?