Front Loader Garbage Truck! We Look at the McNeilus Pacific to Learn So Much About Front Loaders!

This 20 minute video is packed full of knowledge and facts about the Front Loader Garbage Truck! We use the McNeilus Pacific model as an example to discuss many amazing functions of the Front Loader Garbage Truck - Follow Along with the Timestamps below!
This content herein is for educational and entertainment purposes only. This video is not intended for any type of training. Consult an actual Operators Manual of the vehicle you are operating for how to operate a specific vehicle.
TIMESTAMPS
00:00 Introduction
00:34 Inside the Cab - In-Cab Control Panel and Joystick
00:51 Dual Axis Single Lever Joystick
00:55 Optional Dual Lever Controls
00:59 Optional Single Lever Joystick
01:12 The Control Panel Close Up
01:52 McNeilus Pacific Series Front Loader is this Equipment
02:06 Then the Equipment is installed onto a Chassis, such as the Mack truck TerraPro Chassis
02:25 Class 8 Vehicle, GVW Gross Vehicle Weight of over 35,000 pounds
02:40 McNeilus Pacific front loader is 40 cubic yards of capacity
02:45 Length of this Pacific front loader, from front of container to rear is 284 inches, or about 23 feet, 6 inches
02:52 The Arms can lift up to 8,000 pounds
02:56 Axle Scales is an option that weights the container
03:04 Pressurized Water Tank is an option available, to wash off debris from the vehicle
03:19 Hydraulic Fluid Reservoir Tank
03:24 PTO Power Take Off, from the Transmission, powers the Hydraulic Pump
03:32 CNG Compressed Natural Gas tanks are up on top, and powers the engine
03:46 Tandem Axles
03:56 Pusher Wheels
04:16 Tag Wheels
04:41 3 Positions of the Arms and Forks for traveling from site to site
05:19 Before any driving occurs, the driver needs to make sure of these important things - Make sure the tailgate is fully closed, Turn Pump Button off, Turn on all warning and strobe lights
05:53 How the waste is compacted using the Pack/Eject Blade inside the Hopper and Container, and showing Top View of the Hopper
06:12 The Hopper, profile view and top view
06:20 Top Door and how it closes, using hydraulics
06:52 Inside the Hopper is the Pack/Eject Blade - a look at how it moves with 2 hydraulic arms
07:28 The Control Panel Buttons controlling the Pack/Eject Blade
08:48 How this Front Loader Garbage Truck picks up and empties out a 6 cubic yard Dumpster
09:37 Turn on the Hydraulic Pump pressing the button on the control panel
10:21 Dual Axis Single Lever Joystick
10:39 Dual Lever Contols
10:58 Single Lever Joystick Control
13:50 A look at the In-Cab Control Panel Buttons
14:05 Hydraulic Pump Button
14:24 Tailgate Close Button
14:36 Activate Button
14:44 Tailgate Open Button
14:56 Top Door Open Button
15:10 Top Door Close Button
15:23 Side Door Open Warning Feature
15:44 Auto Pack/Eject Cycle Button
15:57 Pack/Eject Blade Retract Button
16:12 Pack/Eject Blade Extend Button
16:35 Arm Over Body Override Button
16:51 Remote Button for External Controls
17:17 Residential Mode Button - for the residential Carry Can if installed
17:36 Rear Work Light Button
17:59 Tag Axle Raise Button
18:14 Tag Axle Lower Button
18:29 Work Light Button
18:46 Pusher Axle Raise Button
19:01 Pusher Axle Lower Button
19:16 Strobe Light Button
19:42 Residential Trash Carts - using the Carry Can installation
20:17 Conclusion - We hope you learned a lot from this video!
Please hit Like and Subscribe - this helps a lot!
Thank you for watching,
- Feed Your Brain
TAGS
McNeilus, McNeilus Garbage Truck, Garbage Truck, Garbage Trucks, Front Loader Garbage Truck, Front Loader Garbage Truck Hopper View, Hydraulics, Control Panel, Joysticks, Dual Axle, Pack Eject Blade, Dumpster, 6 Cubic Dumpster, Pusher Axle, Tag Axle, Mack trucks, Mack TerraPro, TerraPro chassis