I was trying to figure out how to take out the pump and was like no way this thing is coming out thank you for your video got it out in under a minute very helpful
Great video. Thanks!! I have a problem with my TDM 900 fuel pump, such as that at the part where the return is mounted it leaks. Not the hose but between the plastic parts on the outside. Is the an o-ring or something? Do you have any ideas how to fix this. Thank for just reading this message and greetings from the Netherlands
Thank you! Because of your video, I didn't break the plastic housing, and instead of a 170+ dollar part, I just ordered the 10 dollar pump part only. :-)
@@filamrider hi. i have a 2012 r6. i want to remove the tank, drain the fuel, and put fresh fuel in it. in the 2002 r6, there's a fuel shut off valve. the 2012 doesn't have that. if i remove the tank to go put gas in it, will it leak? or can it only leak if the fuel pump is off?
@@clearlight1242 It's efi, just siphon the tank, empty out the gas, have a fire extinguisher near, don't break the elbow, it will only leak from the hosed that's the excess fuel. That's it.
Love this video. You make sure we are able to see exactly what needs done. Thanks much. I have to remove mine in my R1 and believe it’s similar or same. My oring seal has developed a leak.
I think so...my old 1s was 06 and 09 both used same motor pump.... I think if I'm correct 06 to 16 used same model....but make sure to ask from the parts supplier first 🙏... God bless
That little tab its what click on to the filter and it will prevent it from coming out of the tank but if its been broken off just have it snap back on it should be fine
@@filamrider thanks bro. I managed to clean the rust out of the tank and put it back but now it's now starting up. Don't know what's wrong. The relay is new,fuel pump is working as it sends a stream of petrol when the bike is switched on. It would even crank but would not start.
Leo Check the ahhh I cant remember what is called but its the aluminum or steel that run across the cylinders fuel spray think? They have small tiny holes that the gas comes out it could be clog up from the rust, I'm servant take a picture my r6-is now in Philippines. Anyways what's wrong with bike?
Shaheer, Did you check your injector? Where the gas spray on top of your cylinder sometimes it's so clog up with dirt that gas is just tricking it happened with my gixxer it wasn't spraying properly, you basically change the main problem, check you air filter as well, sometime you fuel lines could get clog up too...
Glad it help you out.... that was the whole purpose.... I did it first it was freaking hard so I made a video to help fellow riders going through same dilemma.
Abdelhadi Hamed sup bro, what do you mean It doesn't work does it stop running? stutters?etc try to go more in detail so I can try to figure it out and help you brother, sorry for the late respond I've been out of the country
Abdelhadi Hamed I suggest start with your fuel pump either it's clog up or might need replacement, I had same problem it will not stay idle unless rev to 1500 or higher rpm. good luck keep me posted. Happy holiday.
Turn on the ignition and listen if it comes on and you can hear it priming. If it's not doing any check for the fuel relay under the seat, then the fuel pump after. Make sure battery is good also as it requires the fuel relay pump power from the battery.
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
I was trying to figure out how to take out the pump and was like no way this thing is coming out thank you for your video got it out in under a minute very helpful
Bro...
I'm glad it help out... it was this purpose that I made this video
Great video. Thanks!! I have a problem with my TDM 900 fuel pump, such as that at the part where the return is mounted it leaks. Not the hose but between the plastic parts on the outside. Is the an o-ring or something? Do you have any ideas how to fix this. Thank for just reading this message and greetings from the Netherlands
Thank you! Because of your video, I didn't break the plastic housing, and instead of a 170+ dollar part, I just ordered the 10 dollar pump part only. :-)
Glad the video help out that was the video was all about trying help r6 owners.
@@filamrider hi. i have a 2012 r6. i want to remove the tank, drain the fuel, and put fresh fuel in it. in the 2002 r6, there's a fuel shut off valve. the 2012 doesn't have that. if i remove the tank to go put gas in it, will it leak? or can it only leak if the fuel pump is off?
@@clearlight1242
It's efi, just siphon the tank, empty out the gas, have a fire extinguisher near, don't break the elbow, it will only leak from the hosed that's the excess fuel. That's it.
@@filamrider simple enough. thanks
@@clearlight1242
If you have any question at all feel free to ask, I'll try to help you out and get that bike Rollin.
Love this video. You make sure we are able to see exactly what needs done. Thanks much. I have to remove mine in my R1 and believe it’s similar or same. My oring seal has developed a leak.
Good luck, yes it is same way I did remove mine also it was same problem crack rubber seal.
Bro maybe you know this what you call the connection from big hose to the pump the white thing mine is leaking bad. Thanks
I don't know if it's the same for my 2017, but this is exactly the kind of issue I'd come across and freak out. So thank you very much.
your welcome bro
Very informative video your going to save a lot of people a headache for that you get a like and sub😊
Hi , my bro. İs it fit for all yamaha r6 (2006-2016)?
I think so...my old 1s was 06 and 09 both used same motor pump.... I think if I'm correct 06 to 16 used same model....but make sure to ask from the parts supplier first 🙏...
God bless
What’s that little tab thing that u need to take off so u can take off the assembly , mine broke and don’t know if I can order another or not
That little tab its what click on to the filter and it will prevent it from coming out of the tank but if its been broken off just have it snap back on it should be fine
@@filamrider no the wiring broke not the clip itself , but can’t seem to find the part anywhere
@@flickingfingers4674 have you check ebay.... or if not buy a whole set of fuel pump
I'm glad the video was able to help out.
Edit. I have a leak on my 05 r1 and its similar process just a little bigger in size sea way as my r6.
Thank you for the video. Shame on people who disliked the video.
Your welcome,
You can never satisfy everyone life is life. Pass it on ride safe
@@filamrider true buddy. I have just opened up my 07 r6 tank to clean the rust inside.
Good luck bro
@@filamrider thanks bro. I managed to clean the rust out of the tank and put it back but now it's now starting up. Don't know what's wrong. The relay is new,fuel pump is working as it sends a stream of petrol when the bike is switched on. It would even crank but would not start.
Leo
Check the ahhh I cant remember what is called but its the aluminum or steel that run across the cylinders fuel spray think? They have small tiny holes that the gas comes out it could be clog up from the rust, I'm servant take a picture my r6-is now in Philippines. Anyways what's wrong with bike?
Thank you! - Saved me from a lot of frustration :-)
Glad it help that was the only reason.
Your very welcom
How can you put it in same way no need to uses the screwdriver ?
I used the screw driver to make it easier.... you don't have to but it will make it way Easier
Changed plugs, coils and fuel filter. Bike still stalls and dies, misfires at low rpms. Any ideas what is going on with the bike? R6 11 13000 miles
Shaheer,
Did you check your injector? Where the gas spray on top of your cylinder sometimes it's so clog up with dirt that gas is just tricking it happened with my gixxer it wasn't spraying properly, you basically change the main problem, check you air filter as well, sometime you fuel lines could get clog up too...
Thanks a lot you save me when I change the tank on my r6
Your welcome bro... I'm glad got to help out...
Ride safe bro
Thanks.. that was painful until watching your video..
Glad it help you out.... that was the whole purpose.... I did it first it was freaking hard so I made a video to help fellow riders going through same dilemma.
Can that fit to r6 2006 models?
it might check if 06 and 09 has they same fuel pump
Where can i buy the pump bro?..just pump
does anyone know where I can buy a new fuel pump for a 2007R6
Ebay bro
I just bought one from eBay, got delivered today
@@deadwood1711 Nice bro...
I hope you get it fix and pls ride safe🙏
God bless bro...
I have a problem on my 2013 R6 when i start the bike it doesn't keep working
Abdelhadi Hamed sup bro,
what do you mean It doesn't work does it stop running? stutters?etc try to go more in detail so I can try to figure it out and help you brother, sorry for the late respond I've been out of the country
@@filamrider yes when the bike is warm (60°c) it doesn't stay running only if i accelerate at 1600rpm or it shut down directly
Abdelhadi Hamed
I suggest start with your fuel pump either it's clog up or might need replacement, I had same problem it will not stay idle unless rev to 1500 or higher rpm. good luck keep me posted. Happy holiday.
@@filamrider ok thanks broo
What is the symptom if your fuel pump is faulty?
Turn on the ignition and listen if it comes on and you can hear it priming. If it's not doing any check for the fuel relay under the seat, then the fuel pump after. Make sure battery is good also as it requires the fuel relay pump power from the battery.
It will not prime.
i cut it and its super!!!!
Video is wack.