*UPDATE* Hey to the few in the comments, thank you. I could not get mine to update because the version on the downloader on the zr13 is incorrect on the website. If you go looking you will not find it. Instead go to the older zr15 that is the downloader you need. Version 2.4.41 is what you need. After that it’s just like the video yo !
beautiful!!!! thank you I bought this scan tool with the main focus on turning off the airbag light on my girlfriends 2014 Smart car when I plugged it in it said the vehicle was not supported found your vid did the update and it worked liked a charm.
Just bought myself a Zurich ZR13 at HF this morning...just Updated the Software... All the same Versions as yours ! Thanks for the Video.... Liked/Subscribed !
I would add that there are TWO variants of the updater software on HFT's website. The Firstone I downloaded was called zurichupdater_v02.04.21_live.zip this one didn;t work, and whined about a missing printer. It saw the device but indicated no updates were available. I thought that odd since I got mine back in 2017 & you did this 2 years later. the Second file I downloaded from HFT's site was called: OBDUpdaterPC_V2.4.41_Live.zip, and I installed it over top of the first one. It's updating my ZR13 now. :)
@@starastronomer You're welcome. Your post was helpful in helping me figure out what an *update* should look like. Hvae yu used yours to look at ABS or SRS codes successfully?
This solution fixed my problem as well. But you might wonder, where can you find version 1.4.41? You'll need to download the updater for the Zurich ZR15.
Thanks So much. Can't believe had to come to your page to find this. HF deos a crappy job of telling us how to do this and the Zurick Owners manual doesn't mention it at all!
I have a Zurich ZR13 and watched your video first to see the update process. Looked simple. Well Harbor Freight with its 2 updates, I think is part of the problem. I downloaded the v02.04.21_live and found no updates. By the way my firmware was also 2017. So then I downloaded V2.4.41_Live and got the window for an update. Doing the update it deleted the firmware and database, and loaded the new firmware, but as it was loading the database, I got a message that the firmware load failed due to a cable being disconnected (untrue, nothing was touched), and to disconnect USB cable and reconnect it. I did that. It loaded the firmware, and when it got to the database, it would get to certain percentage and freeze, much longer than 20 minutes. During several attempts, I got it as high as 19% on the database and no more. The reason I'm writing this is to tell others that DON"T DO THE UPDATE! LEAVE IT ALONE, OR YOU WILL WINDUP "BRICKING" THE DEVICE. I did not have problems with the ZR13 before, but I was thinking the update might improve the ZR13. Instead, I wound up with a brick!
That is exactly what happened to me. And now it won't work on my car. It's useless. Is there a way to go back to the original version like it was when we bought it? Help!!
Well glad I read this cause mine is about 4 years old and is starting to not work on some cars. I figure an update would help. Looks like I'll steer clear of that. Thanks.
Same thing happened to me. First it would not read abs, Airbag, gave error. Worked fine on the same vehicle before this time. went to update, down loader, etc. would freeze and act exactly as stated above. BRICKED it!!! Paid for extra warranty so returned. 1 year later, same model is giving me the same vehicle errors, but firm ware is v17.07.03 updater states no updates available. A year later and no vehicle updates?? And out of extended warranty again. ALSO they are not bi direction, and will not read any cranking sensors, on ford 6.0 diesel, so if you have a dead ford diesel, it will only read stored codes, and running tests. Worked good on 2011-81 cruze, dart, avenger, chevy blazer, fixed multiple srs, abs. No immobilizer function though. It was good until it went bad, no warning, just became a bricked scanner overnight. Buying a better scanner this time, not a H Freight 1 year wonder. fyi only a 90 factory warranty to start with I recall
Bought this in the summer of '18 and just updated it tonight after watching your video. Mine updated to version 18.----- and copyright 2020, anyways thanks for the guidance. Oh n BTW as someone had mentioned I also had to use OBDUpdaterPC_V2.4.41 other than complaining about a missing printer it worked fine, thanks again.
The only "update" I have had to this was when I first bought it around four years ago. There have been none since. Not sure this was worth it. Most scanners have yearly updates, albeit, some you have to pay for.
Nice Video!!! What happens when HF decides to discontinue these (Innova produced) scan tools like they did with the Cen-Tech scan tools (Autel produced). I was fortunate to be able to update my 60694 on the Autel website and convert it into an updated AL-519. Hopefully these Zurich units won't be left orphaned by HF and if they are there will be a way to update them! I hate to say it but, SHAME ON HARBOR FREIGHT!!!!!
Thanks Daniel. That is something out of our control with any product. Hopefully HF will continue update support or Innova will allow us to update the HF bought units at their site. I do agree HF should continue support for at least 10 years after they stop getting OBD II readers from a certain supplier.
I just purchased this unit as a "open box" item from Harbor Freight. It has 3 vehicles stored on it and I can't figure out how to remove them. I know that updating the firmware will remove saved data but this unit has already been updated so there is no option to update it on the Zurich Updater 2.4.21. It just says "No Updates Available" and I have the exact same versions as you after you updated. I have read through the entire full owner's manual (the one that is 101 pages) and there is nothing in there about resetting the unit or removing saved vehicle data. UPDATE: I called HF customer support and they informed me that there is no way to remove stored vehicles. It will always store 3 vehicles at a time and the oldest stored data will be automatically erased when it is connected to a new vehicle.
Thank you for alerting me of this BPSDetailing. Since I bought mine new this wasn't even thought of as an issue. Why couldn't they have an update that allows for the deletion of a vehicle other than doing an update of the unit? Should be a simple thing to do? So even if you buy a new vehicle you wouldn't be able to take out the old. I will try to call them and see if an update in the future [or a small patch update] could take care of this. Again, thanks for your input!
No, my update went very bad and now I can't use it on my car anymore. How can I unistall what I just did and get it back to where it was when I bought it.
Jeff Arp...THANK YOU! I do not know for sure as to your question. My thought would be no. I would call Harbor Freight customer service and see what they say at 888-866-5797 or 805-388-1000.
Even though my scanner says 19.06.05 2019 and I just bought it and downloaded the updated, it will not update the tool. It’ll say “follow instructions on the pc” but nothing happens. “Connected” “no updates available”.
@@starastronomer Well, the software is up to date but the programmer is a couple years behind. I can’t get the software to prompt a firmware update onto the scanner.
@@starastronomer HI I HAVE THE ZR15 NUT THERE IS NO SOFTWARE DOWNLOAD OPTION FOR IT NUT WHEN I GO SEE THE ZR13 I SEE THE SOFTWARE THERE FOR THAT ONE. SHOULD I DOWNLOAD THAT ONE
I did pretty much what you did but when I connect my zr13s nothing happens I just have the follow instructions on pc message showing on my zr13s device but nothing changes in the updater
@@starastronomerIt doesn't update and it doesn't even show that it's connected besides the zr13s saying follow the directions on the pc. Problem is there is no instructions on the pc to follow. Scan tool Firmware V19.06.05 Boot loader V18.05.01 Database V19.06.05 If it is up to date it doesn't say it is.
I'm no mechanic but I can't afford to take my Durango to the garage and I need to find out why it cranks but doesn't start. Only thing I'm able to figure out right now is it seems it's not getting spark to ignite. The only people I know who work on cars only work on older models before everything went computerized give them an 87 Durango and they could do anything it needs but they don't work on newer cars and trucks.
Sukotto82 For some strange reason my TH-cam comments haven't been coming through. Just got a months worth tonight, sorry. I agree, older was SO much easier. Today it could be a hundred different things.
@@Sukotto82had the same problem. Turned out the usb cable I was using was for power only and not a data usb cable. Plugged in a data cable and it worked great.
Thanks man! Just used it today for the first time for My Audi A4 errased some codes dont even know what exactly hahaha is there any way I can see what codes got erased? O wait I cant anymore after updating huh LMAOO!
Edward...it is extremely cold here and didn't want to setup the equipment to do it. But, it went smooth. Turn the key in your vehicle to the ON position. Plug in the unit and it will go through a very short initialization and it's ready. Your vehicle is automatically detected and saved.
I updated and checked and it made it not work, took away the Real time monitoring and wouldn't find any codes even when hooked up as the car stalled and spit out a check engine light
I've been sitting around for #$&@*! years waiting for an update, even re-downloading the Z13 update software several times. I revisited this site to ask a question if anyone knew of any updates, and here is the solution! Thanks guys. I've become an old man waiting....LOL! Think we should file a class-action against HF for all of those wasted years of our lives that we will never get back...haha
I was updating my zr13 when my laptop shut off now my scanner says it’s fully updated but the database is empty meaning when I plug it into a car it will read the code but not give the details it usually does anyone know how to fix this?
I did it will continue to delete the firmware and re update it but it will not update the database it still reads codes but it’s now more or less downgraded to those cheap 30 dollar scanner now
I did they asked me to message them on the website and this is what I got. (This is copy and pasted) Thank you for contacting Harbor Freight Tools. “It sounds as though the scan tools got bricked in the process of updating. Unfortunately, there is not a fix for this issue. We apologize for any inconvenience.”
Una pregunta , dónde dice base de datos no me aparece nada y además me descargue el interfaz par actualizarlo y tampoco actualiza aunque si sale que se conecta el escáner a la pc
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
*UPDATE* Hey to the few in the comments, thank you. I could not get mine to update because the version on the downloader on the zr13 is incorrect on the website. If you go looking you will not find it. Instead go to the older zr15 that is the downloader you need. Version 2.4.41 is what you need. After that it’s just like the video yo !
THANK YOU so much for that information xxraydogxx. I will pin your comment.
Thank you. I would have gone nuts.
This download for the zr15 on the zr13 worked for me as well! Thanks. One question though, do I now have the additional features of the zr15?
The ZR15 update version is 2.4.41
The Zr13s Version is 2.4.57
I'm wondering if you can only update to 2.4.57 after the 2.4.41 update?
Btw guys, be sure to only use a usb 2.0 port. Some usb 3.x parts are not backwards compatible
Thanks Buddy, your video got me through the process with out losing my mind, good job.
Thanks so much customprc for those kind words!
beautiful!!!! thank you I bought this scan tool with the main focus on turning off the airbag light on my girlfriends 2014 Smart car when I plugged it in it said the vehicle was not supported found your vid did the update and it worked liked a charm.
Bigbad Tyrant THANK YOU! So glad to be of help.
Just bought myself a Zurich ZR13 at HF this morning...just Updated the Software...
All the same Versions as yours !
Thanks for the Video.... Liked/Subscribed !
You are very welcomed and THANKS!
I would add that there are TWO variants of the updater software on HFT's website. The Firstone I downloaded was called zurichupdater_v02.04.21_live.zip this one didn;t work, and whined about a missing printer. It saw the device but indicated no updates were available. I thought that odd since I got mine back in 2017 & you did this 2 years later.
the Second file I downloaded from HFT's site was called: OBDUpdaterPC_V2.4.41_Live.zip, and I installed it over top of the first one. It's updating my ZR13 now. :)
Thanks for that Ken Fox!
@@starastronomer You're welcome. Your post was helpful in helping me figure out what an *update* should look like.
Hvae yu used yours to look at ABS or SRS codes successfully?
This solution fixed my problem as well. But you might wonder, where can you find version 1.4.41? You'll need to download the updater for the Zurich ZR15.
2 years later and they have yet to update these tools. Go figure. But still a helpful video because I thought maybe I had done something wrong.
Thank You MN6WS6!
Thanks So much. Can't believe had to come to your page to find this. HF deos a crappy job of telling us how to do this and the Zurick Owners manual doesn't mention it at all!
You're so welcomed Scott!
I have a Zurich ZR13 and watched your video first to see the update process. Looked simple. Well Harbor Freight with its 2 updates, I think is part of the problem. I downloaded the v02.04.21_live and found no updates. By the way my firmware was also 2017. So then I downloaded V2.4.41_Live and got the window for an update. Doing the update it deleted the firmware and database, and loaded the new firmware, but as it was loading the database, I got a message that the firmware load failed due to a cable being disconnected (untrue, nothing was touched), and to disconnect USB cable and reconnect it. I did that. It loaded the firmware, and when it got to the database, it would get to certain percentage and freeze, much longer than 20 minutes. During several attempts, I got it as high as 19% on the database and no more. The reason I'm writing this is to tell others that DON"T DO THE UPDATE! LEAVE IT ALONE, OR YOU WILL WINDUP "BRICKING" THE DEVICE. I did not have problems with the ZR13 before, but I was thinking the update might improve the ZR13. Instead, I wound up with a brick!
That is exactly what happened to me. And now it won't work on my car. It's useless. Is there a way to go back to the original version like it was when we bought it? Help!!
Well glad I read this cause mine is about 4 years old and is starting to not work on some cars. I figure an update would help. Looks like I'll steer clear of that. Thanks.
Same thing happened to me. First it would not read abs, Airbag, gave error. Worked fine on the same vehicle before this time. went to update, down loader, etc. would freeze and act exactly as stated above. BRICKED it!!! Paid for extra warranty so returned. 1 year later, same model is giving me the same vehicle errors, but firm ware is v17.07.03 updater states no updates available. A year later and no vehicle updates?? And out of extended warranty again. ALSO they are not bi direction, and will not read any cranking sensors, on ford 6.0 diesel, so if you have a dead ford diesel, it will only read stored codes, and running tests. Worked good on 2011-81 cruze, dart, avenger, chevy blazer, fixed multiple srs, abs. No immobilizer function though. It was good until it went bad, no warning, just became a bricked scanner overnight. Buying a better scanner this time, not a H Freight 1 year wonder. fyi only a 90 factory warranty to start with I recall
Bought this in the summer of '18 and just updated it tonight after watching your video. Mine updated to version 18.----- and copyright 2020, anyways thanks for the guidance. Oh n BTW as someone had mentioned I also had to use OBDUpdaterPC_V2.4.41 other than complaining about a missing printer it worked fine, thanks again.
Thanks for that information JR1068.
The only "update" I have had to this was when I first bought it around four years ago. There have been none since. Not sure this was worth it. Most scanners have yearly updates, albeit, some you have to pay for.
Good video. Good info. Gotta do mine now.
Wish I knew what was actually updated....use laymen will never know...LOL
ThePeopleVerse Thanks!!!
Thanks for the info. Is there any way to do this on a Mac? I can't seem to find any info.
You're welcome. Unfortunately I don't know anything about a Mac system.
Nice Video!!! What happens when HF decides to discontinue these (Innova produced) scan tools like they did with the Cen-Tech scan tools (Autel produced). I was fortunate to be able to update my 60694 on the Autel website and convert it into an updated AL-519. Hopefully these Zurich units won't be left orphaned by HF and if they are there will be a way to update them! I hate to say it but, SHAME ON HARBOR FREIGHT!!!!!
Thanks Daniel. That is something out of our control with any product. Hopefully HF will continue update support or Innova will allow us to update the HF bought units at their site. I do agree HF should continue support for at least 10 years after they stop getting OBD II readers from a certain supplier.
I just purchased this unit as a "open box" item from Harbor Freight. It has 3 vehicles stored on it and I can't figure out how to remove them. I know that updating the firmware will remove saved data but this unit has already been updated so there is no option to update it on the Zurich Updater 2.4.21. It just says "No Updates Available" and I have the exact same versions as you after you updated. I have read through the entire full owner's manual (the one that is 101 pages) and there is nothing in there about resetting the unit or removing saved vehicle data.
UPDATE: I called HF customer support and they informed me that there is no way to remove stored vehicles. It will always store 3 vehicles at a time and the oldest stored data will be automatically erased when it is connected to a new vehicle.
Thank you for alerting me of this BPSDetailing. Since I bought mine new this wasn't even thought of as an issue. Why couldn't they have an update that allows for the deletion of a vehicle other than doing an update of the unit? Should be a simple thing to do? So even if you buy a new vehicle you wouldn't be able to take out the old. I will try to call them and see if an update in the future [or a small patch update] could take care of this. Again, thanks for your input!
My scanner kept turning on and off when I tried to scan a car, I hope that this update will fix that problem
No, my update went very bad and now I can't use it on my car anymore. How can I unistall what I just did and get it back to where it was when I bought it.
Thank you for posting
Zobeida Rodriguez Glad it helped!!!
Thanks for posting!!
YOU'RE WELCOME!
Thanks starastronomer! Just successfully updated my same unit from your video and subscribed. Looking forward to more videos.
So glad it helped you out Scott!!!
What if u have the ZR15 there is no software on the page to download. Can i download the one for zr13 software
Su Amigo El Ilegal I would call customer support first.
Interesting. Does the ZR13 have the ability to read the wheel speed sensors?
Not sure about other vehicles but my 2014 Honda CR-V does not show up on the ZR13.
Yes. I have a Bmw 750li. But it doesnt show live data on it.
I can't get it it extract to my reader. I don't understand why.
Hey good video, I'm not very good on computers. But I was wondering if you can do this with a smartphone or not? Thanks.
Jeff Arp...THANK YOU! I do not know for sure as to your question. My thought would be no. I would call Harbor Freight customer service and see what they say at 888-866-5797 or 805-388-1000.
@@starastronomer ok thanks, I will do just that.
Thank you very much.
Axe B You're welcome!
Should the obd cord be plugged into your car while updating the software?
dassehmc No
Thank you. Very helpful.
You're welcome William!
Even though my scanner says 19.06.05 2019 and I just bought it and downloaded the updated, it will not update the tool. It’ll say “follow instructions on the pc” but nothing happens. “Connected” “no updates available”.
CBRadiosPRONTO So, it states that "no updates" are available? You sure think there would be.
@@starastronomer Well, the software is up to date but the programmer is a couple years behind. I can’t get the software to prompt a firmware update onto the scanner.
Mine can only goes up to 2016, would this update increase the year so I can be able to to use it on my 2019 pilot?
I had mine for a year and its been working good .i just updated now .. and whats going to be the difference ?? More options or what ??
migel5609 Hard to say. I assume software for the tool and new data to vehicles as information changes and new car years.
@@starastronomer HI I HAVE THE ZR15 NUT THERE IS NO SOFTWARE DOWNLOAD OPTION FOR IT NUT WHEN I GO SEE THE ZR13 I SEE THE SOFTWARE THERE FOR THAT ONE. SHOULD I DOWNLOAD THAT ONE
Su Amigo El Ilegal I would call customer support first.
I did pretty much what you did but when I connect my zr13s nothing happens I just have the follow instructions on pc message showing on my zr13s device but nothing changes in the updater
It doesn't update or does it show as the unit is up to date on software? Not sure what you mean?
@@starastronomerIt doesn't update and it doesn't even show that it's connected besides the zr13s saying follow the directions on the pc.
Problem is there is no instructions on the pc to follow.
Scan tool
Firmware V19.06.05
Boot loader V18.05.01
Database V19.06.05
If it is up to date it doesn't say it is.
I'm no mechanic but I can't afford to take my Durango to the garage and I need to find out why it cranks but doesn't start.
Only thing I'm able to figure out right now is it seems it's not getting spark to ignite.
The only people I know who work on cars only work on older models before everything went computerized give them an 87 Durango and they could do anything it needs but they don't work on newer cars and trucks.
Sukotto82 For some strange reason my TH-cam comments haven't been coming through. Just got a months worth tonight, sorry. I agree, older was SO much easier. Today it could be a hundred different things.
@@Sukotto82had the same problem. Turned out the usb cable I was using was for power only and not a data usb cable. Plugged in a data cable and it worked great.
I HAVE THE ZR15 , WHEN I GO TO THE ITEM PAGE IT DOEST HAVE THE DOWNLOAD SOFTWARE.
Su Amigo El Ilegal I would call customer support first.
My ZR15 says Innova on the battery cover.
Very interesting Home Theater Junky
My computer went off while updating and when I connected again it said directory name is invalid what should I do again
Not sure Benjamin.
Mine doesn't update. Keeps saying failed at 2%
Not sure why Veronica. I would call Harbor Freight Tech support.
When I connect the zr11 to the PC it appears connected but it doesn't give me an update option. Who can help me with this please?
Thanks man! Just used it today for the first time for My Audi A4 errased some codes dont even know what exactly hahaha is there any way I can see what codes got erased? O wait I cant anymore after updating huh LMAOO!
Do any of the updates include ABS live data?
No
would anyone know if the new zr13s update can be installed on zr13?
it says innova on the back of the code reader
Would have been optimal to show the Reader connecting to the vehicle after the update, to demonstrate that it actually works.
Edward...it is extremely cold here and didn't want to setup the equipment to do it. But, it went smooth. Turn the key in your vehicle to the ON position. Plug in the unit and it will go through a very short initialization and it's ready. Your vehicle is automatically detected and saved.
What does the update actually do can I scan newer years like 2017 to 2019??
@@jonathanchong4943 I assume that to be the case but not sure. Also bug fixes.
I updated and checked and it made it not work, took away the Real time monitoring and wouldn't find any codes even when hooked up as the car stalled and spit out a check engine light
Does Zurich charge for the updates??
No, they are free.
Mine's the zr8s. It says No updates available
Try a different cable. You were probably using a power only cable and you need to use as data cable.
I've been sitting around for #$&@*! years waiting for an update, even re-downloading the Z13 update software several times. I revisited this site to ask a question if anyone knew of any updates, and here is the solution! Thanks guys. I've become an old man waiting....LOL! Think we should file a class-action against HF for all of those wasted years of our lives that we will never get back...haha
I was updating my zr13 when my laptop shut off now my scanner says it’s fully updated but the database is empty meaning when I plug it into a car it will read the code but not give the details it usually does anyone know how to fix this?
Can you try to do a re-update to the unit? Will it allow you to? I would give that a try if you haven't.
I did it will continue to delete the firmware and re update it but it will not update the database it still reads codes but it’s now more or less downgraded to those cheap 30 dollar scanner now
@@DoubleRRcards I don't know. Can you call Harbor Freight Tech support at (888) 866-5797 and see if they can help?
I did they asked me to message them on the website and this is what I got. (This is copy and pasted) Thank you for contacting Harbor Freight Tools.
“It sounds as though the scan tools got bricked in the process of updating.
Unfortunately, there is not a fix for this issue.
We apologize for any inconvenience.”
So I just got swindled ain’t that but a hitch 😤
Zurich is made by innova
Can it be with an iPad or smart phone .?
Not sure on that???
Una pregunta , dónde dice base de datos no me aparece nada y además me descargue el interfaz par actualizarlo y tampoco actualiza aunque si sale que se conecta el escáner a la pc
Thanks for posting!
Glad you liked Steve Kerr.