Quick tip for the Allen keys. I find that my hands get sore from using the Allen keys when doing major builds like this so what I did is to get the bolt to a point where it is snug and then use a small piece of plastic hollow tube that is longer than the Allen keys long end and use it over the Allen key to tighten the connection into final position. usually just a bit more then snug. I have a center roll from a cash register tap that is perfect for this task as an example.
I usually secure a small piece of conduit above where the cable management entrance is and cut a window in it to route cables to more neatly prior to them going in the entrance. I also will often mount a surface mount box on or under the shelf for the components. I use 3M command strips as the mounting element so I can add, remove or replace the box or conduit easily in the future. or If I have to replaceable this make it easier to do.
Darn you skipped right over the part I need I don’t know how to make the top TV mount part stay still it keeps sliding down to the Trey where your laptop goes
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #2 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/RMhUgxxD49Q/mqdefault.jpg)
![[FULL EP.14] เซียนหรั่ง สอน มาร์ชจุ จับปูนา ฮากระจาย | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/M8mPjd_T2lo/mqdefault.jpg)
Quick tip for the Allen keys. I find that my hands get sore from using the Allen keys when doing major builds like this so what I did is to get the bolt to a point where it is snug and then use a small piece of plastic hollow tube that is longer than the Allen keys long end and use it over the Allen key to tighten the connection into final position. usually just a bit more then snug. I have a center roll from a cash register tap that is perfect for this task as an example.
Wtf.. u missed the part where u explained how to attach the tv plate connector to the non hole pole
Having the same problem
Did you figure it out ? How do you get the top part to stay up??
I usually secure a small piece of conduit above where the cable management entrance is and cut a window in it to route cables to more neatly prior to them going in the entrance. I also will often mount a surface mount box on or under the shelf for the components. I use 3M command strips as the mounting element so I can add, remove or replace the box or conduit easily in the future. or If I have to replaceable this make it easier to do.
You don't visibly show all the steps. Some you lower the camera. 2nd step on the manual isn't visible.
You think the ps5 is supported for the shelves?
Gracias amiga!!
thank you for the video very infromative!
You're welcome! Glad it was helpful!
good review thanks
You're very welcome!!
This could work well as a mobile standing desk!
omg you are right! that's a good idea! never thought of that. I'll try that out!
I am not impressed with the Vivo Rolling T.V cart which I am trying to assemble. Glad yours worked out.😁
👍👍👍
I just ordered this one for my new setup. How long did it take you to put it together?
Oh nice. Not so long I think around 1 hour or maybe less
Are you able to adjust the height because that TV is too high for viewing, especially while laying down in bed.
Yeah you can adjust the height of the TV
@@EastCharmer thanks for the reply !
you didn't show how you put the 2 stick on the bacl of TV,
Good video.
Thank you!!!
@@EastCharmer maybe we can be friends
She is pretty
Darn you skipped right over the part I need I don’t know how to make the top TV mount part stay still it keeps sliding down to the Trey where your laptop goes
Did you figure it out ? How do you get the top part to stay up??
Is tris ? perlesmith tv stand modell pstvmc06 ?
What .. what was the purpose of this video ?
If a girl can put it together ,then I must can too
Go for it!!!!
Nerf it nerf it 😅
Lmfao!!! 😆😆😆
If you're gonna do a how to video, make sure you show every step!!! Good Grief!!! 👎🏾👎🏾
This isn't a How to video. That's why that's not the title. it's more of unboxing