An Awesome Space Saver / Making a fold down Vise
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Because i have a little workshop, i needed a solution for a vise, that i can use at my workbench. But when i don't need the vise, i want it to be out of the way. So i came up with an idea that really worked well for me.
ISBI
-------------------------------------------------------------------------------
#ISimplyBuiltIt
-------------------------------------------------------------------------------
Watch my other Videos :
DIY Workbench with drawers : • How to Make a Workbenc...
DIY Disc sander : • How to Make a Disc San...
-------------------------------------------------------------------------------
Song: Jim Yosef - Speed [NCS Release]
Music provided by NoCopyrightSounds.
Video Link: • Jim Yosef - Speed | Ho...
Download Link: NCS.lnk.to/Speed
You are a blooming GENIUS!!
Utterly brilliant! Thank you for posting.
Very impressive. Amazing chisel work for the hinges!
Great stuff....except for the music.....annoying gain/loud/soft.
Keo's Best De
This is an awesome build! Could do without the music, tho.
Thanks.
In newer and future videos are no music anymore.
@@ISIMPLYBUILTIT You could sing your commentary. What could go wrong?
Agreed, the music is distracting and can barely here him speak.
Loving all of your videos and ingenious solutions to small-shop problems.
All the folding vise needs now is some kind of retention system for the star knobs, so they can be left in the vise board when in the folded-down/ stored position.
Seriously, I could do without the loud music! Otherwise....nice build. :)
VERY LOUD MUSIC lose it
You do nice work.
Very nice. I'll have to give it a go too. One thing I'd suggest though is that when you drill into the bench top for the threaded inserts I would drill all the way through. It would make it easier to clean out sawdust and debris by letting it fall through.
Great project and well executed. It's always nice to see the finished item at the start of the video, cheers.
You gave me a really interesting cue because I changed Work Bench and I did not know where to put the vise. Thanks a very good idea.
Very well done! The best video I've seen on this subject! You must be either Swiss or German as quality workmanship is a hallmark!
Thank you very much. I really appreciate that. Yeah you‘re right, i‘m a swiss guy ;-)
Excellent job. I am impressed by your precision and craftsmanship.
Thank you so much
Brilliant!!
Genau so eine Lösung habe ich gesucht. Danke für das Video. Werde es zeitnah umsetzen.
Gerne. Freut mich wenn ich durch meine Idee helfen kann :-)
Man. Your voice is spot on for the Zec. You sound just like him. Oh, and cool vise, very well done!
Good idea and video. I did something similar for both my Bose and my 2 wheel grinder. I didn’t make the slide though. I put the vise on wood as you did and also my grinder on another. I lined up four holes the same in both the wood bases. Then inserted four threaded inserts into my workbench. Also used knob bolts. Just place whichever I want on the table screw it in and wala, secured!
That's also a good solution.
Very good idea...very nice...Thank . Norbert.
Thanks
Very nice. Thank you for sharing. I love how you treat your tools and your workspace!
Thank you!
Thank you so much.
Well, this is a darn clever idea! And, I’ll use it, by golly. If the bench had dog holes or t-track it would be even faster to secure the vice and get rid of it. Still, really brilliant, thanks.
Have mercy! The techno-pop is killing me!😢
very ingenious you have a beautifuls ideas
That's a clever build. Thanks for sharing.
Thanks
New subscriber - I love your ideas, builds and videos. Thank you!
Could you turn down the music though? Makes it really difficult to watch when I keep having to change volume between talking and music parts...
Thank you. In the newer Videos, the music is not so loud.
@@ISIMPLYBUILTIT Brilliant - thanks. Sorry to have moaned, but I often watch on headphones so big changes in volume can really make me jump!
@@rjamsbury1 you could turn sound off for that video, turn CC on , and listen to something you like , that's what i usually do
That's are very neat way to store your wise off the bench
Superb idea.
Excellent video and process. Thanks for sharing
Thank you
That was very good, same as ur box joint jig. I made ur box joint jig it works very well I only use 3/4" Sewood so that's all I made it for.
Again very well done
Thanks
Thank you.
That is such a cool design. Thanks for sharing
Thank you
Great work!!!
Спасибо,отличную идею подал. 👍👍👌
Excellent. I have a similar situation in my shop; my vice is for a bit heavier use, so the method I used is a bit more robust, but very much the same general idea.
Thanks.
I think I'm going to make one of these, with a slight change longer t track frame and hinges on the 90 degree from vise base so can fold and slide in saying against bottom of workbench out of way. Thanks for the inspiration and great video
Que genial idea !!, buen trabajo, con su permiso la implentare en mi taller.
Brilliant!
That is brilliant!!!. Well done great idea.
Awesome job
Thank you.
Sehr clever ausgedacht. Mit Ihrer Erlaubnis baue ich mir auch so etwas . Grüße aus Belgien
Vielen Dank. Klar können Sie sich das nachbauen. Wenn ich nicht wollte, dass man es nachbaut, würde ich meine Ideen nicht veröffentlichen. Ich habe ja auch schon das eine oder andere nachgebaut. Aber trotzdem danke fürs fragen. Grüsse aus der Schweiz 🇨🇭
This is a great idea. I am on ebay now buying an engineers vice. Never had the space foe one. I do now :)
Thanks. I‘m glad if this helped you.
Excellent idea! 👍
Thank you
I need to do something like that in my workshop but it won't be as good looking as yours, thanks for the inspiration 👍
Magnifica idea, me gusta para esconder la licuadora en la cocina!
magic!!!! super je vais le fabriquer merci
Top Work ,good Idea -
think i will copy this
Good stuff. Thank you.
Great idea. Going to make the same for my hoby shop.Thanks for sharing!
Thank you. I‘m glad if you like it.
Thank you again. I finished it today and I'm very hapy with the result.
Great channel. It's great to see German precision is not dead :-)
Thank you. Actually it's Swiss precision 😊🇨🇭
Even better :D
Good idea für using the bench vice. A french cleat system would also be nice for your tools. 👍
Super Idee ;-)
Love it! I've got to make one of these. Thanks!
Thank you!
Dan! I sure am Glad you do not play loud music in your videos!
that is a great idea.... Well done. i will keep it in mind making one as needed.
Thank you.
Nice project. I am planning my next workbench and you gave me an idea or two.
Only one comment. The strings from your hoodie are a potential hazard. Especially when working around the table saw.
This is great. I'm saved this; and I'm going to see if I can do something with this in my 'shop.
Thank you.
I'm sure you can.
Well done & so useful ! ---- As a novice woodworker but in the health field, I have never liked any loose-fitting clothing or with strings dangling from them, when around any machine with moveable parts. Please, zip in your sweatshirt draw strings when working around tools!😔
Thank you. I have already cut the strings off.
Genius
Thank you.
..... However, inadequate clothing can be VERY DANGEROUS in a workshop !!!! Those hanging LACES over turning machines are.... yeeak !!! Thank you for the video !! But KEEP SAFE Please !!
Gute Idee super gebaut.
Danke Dir???
Nice video ... cut the music please. 🤔 worth a subscription. Enjoyed your attention to detail.
Nice job, put rubber o-rings on the bottom of the bolts and they will stay attached to the bottom of the vice holder when it is stowed
That's indeed a good idea.
@@ISIMPLYBUILTIT Further to that, it might be an idea to have a couple of nut inserts on the underside of the bench which you could screw the stowed bolts into, this would take the strain away from the hinges too.
Yes this loud music distracts and your voice over is hard to understand, your videos are worthwhile and informative but hard to maintain interest
I know. In newer videos are no music anymore
Sehr gute Idee! Muss ja nicht gleich klappbar sein, was natürlich die optimale Variante ist, aber der Schraubstock auf einer eigenen Holzplatte befestigt und mit geeigneten Rändelschrauben und eingelassenen Gewinden in der Werkbank schnell montierbar. Werd´ich wohl so machen.
Danke
That's freaking smart!
Thanks for sharing :-)
Thanks.
Excellent video. The music is WAY too loud though.
Thanks. In newer videos are no music anymore.
Super idea danke für das ich will auch machen
Parabéns pela ideia, eu estou precisando fazer uma adaptação destas na minha bancada, acredito que além de ficar ótimo com a morsa, pode ser aplicada a mesma ideia para o esmeril.
Abraço aqui do Brasil 🇧🇷
i like the idea, just curious on how those hinges and joints are holding up, now that it's been almost 2 years since you posted this, i always worry about that kind of stuff breaking , and falling on something expensive, like my foot, vise's are very heavy, please let me know, i'm looking for a solution to the same problem you have,,,, no space
Great idea and nice build. "Music" terrible.
Great idea but the short screws in the hinges are a possible weak point. I would have put bolts through perhaps
Hmm, maybe. It is a heavy vise. But I don't see the room to put the screws any further into the plywood without it protruding. A third hinge, maybe?
Or, alternatively, thicken the board (say, 12 mm Ply, & expand the slipway - that'd be enough to employ longer screws/fixings, the weight differential would be negligible), Anthony ?
Ich bin immer von deinen Videos begeistert, heute auch. Nur die Musik ist etwas zu laut geraten. Gruß aus München
The same comments for two years. Make the music quieter so that you can watch the video until the end!
sauber!
Dankeschön!
Great video and idea..i had to turn volume off music was too stressful. .cheers
Top
Thanks
for small things ok, but if you need to pry hard those mounts are coming out!!!
Very nicely done!! This video was done in such a manner as to allow those of us viewing to try and replicate your work. I have a question...Are you concerned with the weight of the vise as it is stored under the bench hanging? I was wondering if its weight might possible be too much for the hinges to hold it. Thank you and also thank you for allowing us to subscribe to your channel! Bless you sir!
Thank you man. No i was not really concerned. Because the screws are loaded on shear and not on traction. That means the weight will be hold by the screws and not by the wood. And such a screw in plywood holds more as we think. To mount the whole construction under the table top, i used many screws. By the way, the vise weighs 13 kg.
Thank you so much for responding the my question. Have a wonderful week!!
I too have limited space and find this an interesting idea. However, I'm concerned about the weight of the vise on those hinges - how is it holding up [31 Oct 2019]?
I had never problems so far. I built it 1,5 years ago.
this is the exact comment/question i was hoping was in here, and had been answered. i was thinking it would have been nice to lock it in place when stored away somehow, that took the weight off the hinges.
Nice space saving idea. Love d it but could please get rid of that music, and cut the volume a lot!!!
Great idea! I subscribe to your Channel.
Thank you!
I agreed with Walt...NO MUSIC PLEASE
Очень поучительный урок по врезке петли. Очень долго смотрел!!!!!!
спасибо
Agree with the previous comments, great idea, horrible music.
Silence would be better than the music.
Thank you!
great build but wouldn't the router have made short work of the hinge recess and PLEASE , lose the music, so annoying , thanks for posting from Garry in the UK
Thank you. Maybe that way it would be gone faster, but i'm not so good at freehand routing, and at this time i haden't a router table. In future videos there will be another type of music, just quieter.
The music was ok. I liked the back ground music.
Had to mute the sound...my eyeballs started to rattle around in my head !
Very good idee, wrong music
So have you used your vice with any steel pipe and used a pipe wrench to really tork down or break loose any pipe that is difficult to break loose? Have you used it with a 2 pound shop hammer to flatten any steel round stock? Just wanted to know if you put it through what a shop vice would go through.
Mutig, mutig mit deutschem Leim!!! 👍👍👍 Hält der den Überhaupt? ;-)
Good video so far but I had to stop and comment on the music track because it is not level with your voice track. I have to turn it down because the music it's too loud then up again to hear your voice. Hope this helps
Thanks. In the newest videos are no more music.
@@ISIMPLYBUILTIT I didn't realize how old this video was until after I commented
geile Idee!!! werd ich auch so umsätzen, da wenig platz vorhanden:D welchen schraubstock hast du da?
Danke Dir. Den habe ich im Baumarkt gekauft als er mal Aktion war.
And...you drilled thru the bench top, most of us trying to find a solution not to. ;)
All in all not bad end result but as other said - drop that type of music, please.
How about all of us chip in and buy this guy a simple router so he can give his chisel a bit of a rest? :-)
my boss showed me something, playing cards make very good spacers , shims, they are all exactly the same and you get 54 for a dollar, they are also very durable
UPzzzz what an over-geared muZzzick ,,,, way 2 high
I like your videos except for the music on this one. It appears from the comments below that you know of this problem and will remedy that shortly. When cutting out the layers for the hinges, a router plane would make that much less time consuming and get it flat and parallel to the top surface easier. And when drilling the holes to match the countersinks in the hinges self-centering drill bits put the hole in the correct location more accurately than eye-balling center. It appeared that you did, however, do a remarkably good job of cutting with chisel and centering the countersunk holes without those items.
Dónde puedo conseguir ese hermosa tornillo de banco acá en México
Красиво,но в таких тисках ничего не загнёшь,выворотишь всё с мясом. Тиски должны быть закреплены на верстаке жёстко,так,чтобы и металлическую полосу загнуть, и пруток стальной и т.д.
Great video, but why the deafening music???
Let me understand the thickness you have on the piece where there is the vise is equal to the thickness of the worktop or has a double size? Thank you
Right!
Great design but get rid of those hanging strings round your neck before they catch on rotating machines and choke you
Thanks. I allready cutted them off.
most of you in the comment section clearly don't have a clue about real world workshop situations. What would happen if you need to undo something really tight and your vice needs to hold it still so you can apply force to undo it. This silly vice holder would simply break apart because it clearly cannot stand up to a significant amount of force being applied to it
Fantastic solution! I have a question.
Will the weight of the wise overload the hinges when it is under the table? It will probably break them.
Thanks!
Thanks. No that's not a problem at all. The hinges are too big that they can break.