Yes I'm happy with how it works. And being a dry heat source unlike natural gas or propane it does not put moisture in the air and you don't need a dehumidifier. Thanks for watching Gary.
Excellent video. Just one little tip. Don’t leave your pellet bags directly on a concrete floor. They will absorb moisture. I either use a skid or put a piece of ply on the floor.
I got my first E1 error on Sunday evening. Not sure what happened I came back to a firepot full of pellets and the stove was shutdown after burning good all day long. Firepot was OK, nothing was blocking the igniter and no clinkers in the pot. Not been able to reproduce the error since. Has it happened to you yet?
Don't you have to restart the stove when you switch between Eco1 and Eco2? I do for mine. I have also found I have to restart for the new P settings to take effect. For some strange reason I can only change between eco settings via the app, it will not switch using the touchpad on mine. I started using those new settings yesterday and I am getting more heat but also noticing more pellet usage.
I can change all the settings in P modes via the app and the control panel when the stove is running. I think the new settings use a few more pellets but its seems to heat the shop up faster so I could turn it down sooner. I don't work in the shop all the time and -37C with a wind is just too cold to start with. 🙂
I have the same stove set up in my house 920 square footage and I don’t know how to set the fans on my stove. Is there any way you can make a video showing me how to do it?
Hi Steve it depends on how much I run it in P1,P2 Eco1 Eco2 etc. but I think on average up to 30 hours. I'm only using it to warm my shop when out there working and usually for 5-7 hours. It seems ok to me on the usage and my situation. Thanks for watching.
Big thanks on the exhaust & blower settings
Too cold for my desert blood, but glad to see that it's taking the chill off just a little bit for you.
It gets pretty nice to work in and it's better than being outside at -27C with a wind....LOL Thanks for watching Scott.
Love the video. Just bought the same stove. Was hoping to see your installation video. Just subscribed so would love to see it. Thanks Jimmy
Checked all your videos out but can't see the installation one. Will check back later. Thanks
Found it. I subscribed to the channel. Thank you
Glad you found it...and thanks for watching and the sub.....
Thanks for the update Mike I was curious how you were making out with the new stove especially in these temperatures looks like a good investment
Yes I'm happy with how it works. And being a dry heat source unlike natural gas or propane it does not put moisture in the air and you don't need a dehumidifier. Thanks for watching Gary.
Thanks for the update 😊 much appreciated
Excellent video. Just one little tip. Don’t leave your pellet bags directly on a concrete floor. They will absorb moisture. I either use a skid or put a piece of ply on the floor.
Yes I have them on a pallet in the shop off the floor... Great tip thanks for watching....
I got my first E1 error on Sunday evening. Not sure what happened I came back to a firepot full of pellets and the stove was shutdown after burning good all day long. Firepot was OK, nothing was blocking the igniter and no clinkers in the pot. Not been able to reproduce the error since. Has it happened to you yet?
I had one off the start and it was a jammed pellet in the auger since then it has been fine.
Don't you have to restart the stove when you switch between Eco1 and Eco2? I do for mine. I have also found I have to restart for the new P settings to take effect. For some strange reason I can only change between eco settings via the app, it will not switch using the touchpad on mine. I started using those new settings yesterday and I am getting more heat but also noticing more pellet usage.
I can change all the settings in P modes via the app and the control panel when the stove is running. I think the new settings use a few more pellets but its seems to heat the shop up faster so I could turn it down sooner. I don't work in the shop all the time and -37C with a wind is just too cold to start with. 🙂
I have the same stove set up in my house 920 square footage and I don’t know how to set the fans on my stove. Is there any way you can make a video showing me how to do it?
Hi I will have a look and see what I can do subscribe to get notice when it's up......Thanks for watching.
@@Nova.1971 thank you so much, I’ll subscribe
@@wandathefam621 I'm just uploading the video on adjusting fan speeds.......
Does the glass stay cleaner longer with the setting changes during eco mode 2?
No it gets just a dirty as far as I can see. Thanks for watching...
wow 7.99 plus tax,,,bag prices are going up
@@robertswift6101 yes they are but are close to last winter’s price.
How many hours do u get off 1 bag . Thanks
Hi Steve it depends on how much I run it in P1,P2 Eco1 Eco2 etc. but I think on average up to 30 hours. I'm only using it to warm my shop when out there working and usually for 5-7 hours. It seems ok to me on the usage and my situation. Thanks for watching.
What is the auto for?
I would have to look into that as I don't know. Maybe someone can comment on it.
What auto are you referring to?