MJX HyperGo-Better with bigger tires?
ฝัง
- เผยแพร่เมื่อ 7 ม.ค. 2023
- MJX HyperGo: www.banggood.com/custlink/G3D...
Amazon's HyperGo: amzn.to/3GLVctN
HBX 16889a Pro: www.banggood.com/custlink/m33...
HBX 16889a Pro (Amazon): amzn.to/3FFPxUe
Larger Tires: amzn.to/3GbKsEO
Wheel extensions: amzn.to/3VZmDFG
Security Camera: amzn.to/3Gy87zw - บันเทิง
![[TH] 2024 PMWC x EWC Group Stage Day 3 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/VnOqutfqWqU/mqdefault.jpg)
Ever since I subscribed to channel. I went with the HyperGo-brushless version.
As always enjoy the video and keep bashing
Great choice and thanks for watching!!
That commercial for the security camera is priceless!
I bet if large companies would advertise like that they would sell way more products!
You’re good!!
Haha! Ya I had fun with that. Glad you liked it!
The camera advertisement was so funny, you really put a lot of work into it to make it good and funny. Wish all youtubers were making it like you are :D top
Thanks! Yes I did work on it for quite some time. Lol I really only like to put out stuff that I could watch more than once without getting bored.
Thanks!!
Thanks Evan you are still the best, so honest every time. Keep it up!!!
Thanks so much!!
Thanks for the solid review! I had a Hyper Go brushless for a few weeks. It was very fast and fun to drive, but it would flip over a lot when running it off road with the stock wheels and tires.
You’re welcome!!
Yes it’s not super stable. Certainly is a fun car otherwise!
I've been waiting for you to drop a full bash comparison, thanks btw.
Coming up!! 🙂
I love that little HBX truck. It is a blast to run.
Yes it is 👍
Wow, the exact same thing happened to mine when I tried to put the bigger tires on. Broke the same pin and broke a tooth off the drive shaft gear. Needless to say went back to the smaller tires. I also (during a jump and hard landing) had the back shock tower break along with one of the rear shocks. Parts are available though so should be getting them today and will finish putting it back together tonight. Oh well, that's why you call it a hobby. Working on them is all part of it!!
I don’t doubt it lol. Once it went on 3s with those bigger tires, it didn’t take long lol.
But I agree, I like the wrenching side too.
Good stuff w the vids, just getting into hypergo's after dealing w Nitro for yrss & your vids are dope & very informative.🔥💪🏽
Thanks!!
Great video! I agree not one to upgrade unless you do much more work like you are going to do! That will be an amazing video!!!
Thanks Brad!!
We’ll see what we can come up with!
Awesome experiment Evan! Those MJx’s are wicked tough as is out of the box. I agree those bigger tires didn’t help it though. Would love to see a video of these two ducking it out in stock trim. Just the way they came.
I didn’t realize mjx shared parts with hbx… hmmm that’s really good to know! Thanks and great luck my friend!✌🏻😋👍🏻
Thanks! Yes I agree they are tough, but gotta leave the tires alone lol.
I will do a comparison of those two for sure!
Thanks as always!!
3:36 - the same happened to my son's MJX 16208, I used a small drill and drilled the broken off screw from the bottom and the drill "grabbing" the broken screw from the bottom screwed it out far enough on top so that I was able to grab it with long nose pliers and screw out the broken bit.
Wowowowow, The performance is crazy. Those smooth beautiful back flips from standing. WOW!
I am going to order some pins like this and those tires to rip off this crazy little car. Great bashing.
It was definitely fun. I also would recommend a stronger servo. The steering is absolutely terrible with those wheels. Also, get some wheel spacers that are longer than 15mm.
The pins in the diffs are not your typical 10mm length, so be sure to order the correct ones 👍👍
After that it should be great lol
I am running these exact tires on exact same car. I use 15mm spacers.
Only run 2s
This setup is PERFECT for ramp bashing.. 100% more control in the air.. the mjx hyper go brushless 16th scale went from super to amazing
Yes the tires were awesome til it ‘sploded my diff lol. I was on 3s though 😆
Brooo, cheers! That video has all I wanted to know and more in it! Your ads are the best, youtube take a cue...🤣
Thanks!! Haha ya that ad was fun to make!
Good part is that pin is easily upgraded, it looked like pot metal too. I heard they upgraded the diffs with a new metal, wonder if it would survive? I might try just the spacers first and see if I cant figure out a way to stiffen up the servo saver. Perhaps a 3d printed piece of TPU to take uo some of the give? This could be why it handles poorly too. I also noticed the servo gears are plastic, seems like a good digital servo might help further.
Great video, this was the one I was waiting on! Kind of a bummer the bigger tires uncovered some weaknesses, but I wonder if the HBX was as fast if it would have the same weaknesses...
Thanks!
I think the hbx would still fair better. Since the hbx has always been run in concrete and able to get faster speeds before hitting the ramp and it tops out at 21 mph on the stock tires, it’s probably 22-23 on the bigger ones. The mjx topped out around 26-27, but actually felt slower on the bigger wheels because the motor is wired more for speed, than power and just couldn’t get it there as easily. The hbx plastics feel more flexible/less brittle to me.
The homemade ad was my favorite!! 😂😂
Haha! Glad you liked it. And a good 1/3 of the viewers STILL skipped through the ad! Just can’t please these people! 🤣
What a shame!!
Hallo again, I see my MJX has a problem, maybe you can help - the right steering link bangs against the front differential housing when the car turns right, do you know why this is and how to fix it?
You have great control with that truck when it’s airbourne
Thanks!
2:35 comedy gold reference.
Perfect throw 100%, landed on all 4 wheels 👌😂🤣
Lol!!
I use a Venom Fly 800mah 3s battery in my 16889a pro- has jst plug, so need adapter, ( both on Amazon ) never had a cut off problem, and it almost fits perfect in battery slot. Great video ‼️👍👍🦾🦾
Any chance you have a link to the adaptor you used for that battery? I’m a noob and am getting confused on the connector types
@987dcm the battery ( venom fly ) comes with a JST type connector. The truck takes a T-plug also known as a Dean's connector. On Amazon Prime ( regular Amazon may be different ) =
OLRC 3pcs T-plug dean's style Female to JST wireless connector adapter ( C55-3 ). Right now on Amazon Prime they are 23%off which makes them only $9.99.
Sometimes prices are different on regular Amazon than Prime- no idea why. Hope this helps- I just see all of these people putting these big ass 3s batteries in that little truck anyway they can!🤣 these little ones almost fit flat in the battery tray, and strap in just fine using the truck's strap it came with. 👍
Nice that’s good to know!
Thanks!!
The battery I used doesn’t fit well. The adapter is homemade.
Definitely go with doubledomes setup! Sounds way better than mine lol
@Derby City RC anytime! ...saw a guy on TH-cam that was using a 3s battery the size that fits in the arrma big rock.🤣 ...then had a cell phone strapped UNDER the vehicle for the gps speed run. 🤣🤣
I was waiting for a rear diff to be delivered. I Jb welded the rear end. Worked pretty good. I got some traxxas slash 1/10 scale wheels. Spacers and new quicrun esc. Guessing I’ll
Have to upgrade servo and motor to spectrum soon when it’s toast. Been looking for a upgraded version 1/16 shocks
Nice!
I have not tried any other shocks on here yet. Actually I’ve used the shocks off this on other cars lol
@@DerbyCityRC 14bm might be just right im thinking. it would be cool if you made a small track or obstacle course on the back yard, toss a few cones down,
compared a few cars
What do you think about the HBX18 vs the 16?
The sneeaky bad guy at night😂😂😂 hilarious 😂 loved it.
Haha!! Ya what a creeper!!!
I always love this kinda thing - I WANT to know if a little basher can handle bigger wheels, and if not, why not! Awesome content as always dudes (including little dudes 👍)
Thanks man!! Me too! I was expecting better but still a the best performing 1/16 scale I’d say, just lacks a bit in durability!
💪😎🤘
@@DerbyCityRC
Great video. I’m new to RCs. Just bought the HBX and going to pick up those larger wheels.
1. Since this video, have you see any issues with the larger wheels over the stock wheels?
2. Can you make a video showing how to switch out the wheels?
3. Exactly what tools do you need?
Thanks!!!
The Hyper Go is the choice over the HBX because it can handle 3S.
If speed is what you’re going for then it absolutely is!
Have you tried to put a 1/14 scale control arms on the 1/16 scale to get a wider stance ( I’m not sure if that is possible or not) but the arms look very similar with the only difference looking like the 1/14 would be longer?
The 1/14 scale arms actually aren’t any wider (if so then just barely). I’ve got an awesome fix for that coming for the 1/14 scale in probably three weeks that will most likely also work on the 1/16. 👍
Having the h16bm version of this(clip based body) and I've destroyed 3 sets of differentals now... no upgrades, just 2s 3s runs, with lithium grease in the diffs and re oiled the shocks and what not it's the cheap metal in the diffs
Oh ya. The cheap stuff right in the worst place!!
Do you know of any upgrade that can be done to it that will improve the control response? For example the not being able to reverse at any time. I'd also love to be able to have more throttle control at the crawling speeds.
Being to reverse at any time I don’t know. Most controllers and brushless cars are designed to hit brakes, and then tap again for reverse. That is standard.
For more control at crawling speeds, you would probably want to go to a sensored brushless motor and esc set up or even a brushed motor.
@@DerbyCityRC Ok thanks for the info!
I am actually going to try new HBX 16889A tyres on my MJX when it arrives to see if it sorts out the tipping over problem you mentioned in your comparison video.
I’d love to know. Haven’t tried yet but makes the most sense!
Any update on how your experiment turned out?
Why would those tires help?
The hbx tires don’t have as much traction so may allow the car to power slide better instead of easily flipping over while turning at high speeds.
Hello! I now know what you meant about that diff pin when you replied me. (HBX VS MJX video).
I've never broken a diff pin before. As mentioned it's just the bevel gear.
Question though, is the MJX motor pinion 3.175 standard?
16889 pro is the only one that uses that. The rest of its clones seems to use the 2.3mm
Ya it broke pretty easy compared to the hbx, which I’ve never broken a pin on. I actually am not sure what size the motor shaft is. I haven’t really looked before.
im just getting into rc an purchased a hyper go h16mb. could I run these big tires or would I ruin the diff or axles. I got 3x spare 3s batteries and the metal spare parts kit
As far as I know, it’s the exact same car with the different body and body clip system. Most likely will ruin the diffs, however you could replace them with the upgraded versions. Keep in mind that no matter what, the bigger tires will wear parts out quicker.
Trying to figure out how to run the hyper go in grass for my herding dog to run with. The stock tires are too small and get stuck in the grass.
They now sell an upgraded differential and I’ve also seen upgraded spur gears available. Replacing all that stuff should make a huge difference and make it work much longer with bigger tires. Also maybe adding some wheel spacers like these to give it a bit better stability so it’s not constantly rolling over if you think that would help.
amzn.to/3X3WAhY
Did you ever find a differential replacement to fix things? Just bought a mjx myself and would like to buy a backup or two.
Unfortunately I haven’t had time to dig into it. I’ve heard they made better diffs but I just haven’t looked. Pretty sure you can just get hbx 16889a pro diffs for it as they have much better metal on them.
Can you adjust the front toe position? Where do you adjust it and which direction do you turn it to get the toe inward?
Yes, you turn the metal part of the tie rods in one direction. The tie rod is the connecting piece that pushes or pulls on the knuckle/wheel assembly when the car turns. I can’t remember which direction, but you can tell what way it moves if you watch carefully while you turn them.
Hiw do I get my radio to respond like my trx4. It doesn't have good control, kinda unpredictable
Not sure. Luckily I don’t have an issue like that. Is there a delay?
Great review
Thanks!
Great video. What size drill bit did you use?
Thanks! I can’t remember lol. I just grabbed the biggest one that fit in the main barrel, but not inside the ridge that was hitting the axle.
Any suggestions for upgrading the shocks on these? Thanks!
Unfortunately no, however I’m pretty happy with the shock performance. I may still try thicker fluid in them though.
Hi Derby City rc. Ive bought a mjx hyper go h16bm and for some reason the car is moving on its own. Its steering and accelarating without me controlling it. Is there a fix. Did you make any video about it. Thanks
That’s interesting. Be sure you’re not holding the trigger or steering wheel when you power the remote on, otherwise I cannot think of a fix. Something must be faulty
if only running hjx hyper with 2s battery. Is the big wheel stable? i don't need to run fast with 3s . battery
Unfortunately no. It didn’t do well with the big wheels at all!
Just wondering, how do you rate the Ovonic Lipo, compared to other similar spec and $ Chinese lipo's? Have you had much experience with them? Also curious, how much run time did you get out of that 2200Mah Ovonic?
I do like the ovonics. I have similarly sized Gens Ace batteries as well and the ovonics keep up. I have a couple cheap Urgenex batteries too and they’re ok, but I’ve had a couple failures out of them.
So far I’m a big fan for sure. Most 1/12 scale cars seem to get me 20 minutes of run time per battery.
@@DerbyCityRC Thanks for the feedback. It's hard to get definitive reviews on different branded Lipo's online. Everyone seems to have a different experience. Perhaps the quality control in commonly available Chinese lipo's is a litte inconsistent. Some also seem to overstate the specs (mAh and C rating). I notice the Ovonic is quite small and light and I was curious if it was true to spec.
I agree that everyone has a different experience. I do like my ovonics, though one of my 3s’s just lost a cell so I destroyed it.
C ratings are definitely made up sometimes lol
Maybe you could try this accessory, curious to see how it will handle : "Nylon Aluminum Alloy Roll Cage Wheelie Bar" for the MJX, about 20USD, I might order one soon...
Sounds cool! Lol
Aluminum isn’t always a good choice for bashing hard though lol. Plastic can flex much better! Lol
Hi, nice video. Where did you bought the wheel spacer? It s not in the links
Thanks!
Whoops forgot to add those.
Here they are. I used the 15mm extensions there are longer ones available in this link as well.
amzn.to/3VZmDFG
Thanks! Good to know that the axles came with 4mm thread, whereas wltoys are in 3mm!
Yes they have standard 1/16 scale axle threads. It’s just the bearing journals are a bit bigger than most, which is why I had to drill the spacers out.
Glad this was helpful!
I see your Amazon link is to a h16bm, is this the same?
From what I’ve gathered, it’s the same car with a different body. At the time this exact model wasn’t on Amazon yet. It might be now though.
Olá, mano, quais são esses modelos de pneus grandes que voce usou no 16208? Bom video💥🤘👏
Thanks man!
These here: amzn.to/3JH7fsZ
Any heat issues on 3s?
Seems like a beast too bad the diff went out.
I’m sure there’s was some esc heat with the bigger wheels, since there was with 2s. As far as 3s with stock wheels, I did not check temps unfortunately. It is rated to take 3s so as long as you give it a bit of a breather between packs, it should be fine on 3s with stock tires.
Hey, love the videos, I have the same rc car and wanted to know which velcro straps work the best for the 3s mod, I tried the apex rc 16x200 and that was too small, will the apex rc 16x300 fit ?
Thanks! If I remember right, the only I have somewhere are either 250 or 300mm, so I believe they will work 👍
@@DerbyCityRC Thank you so much
You’re welcome!
Do you think the tires and wheels off of the hbx 901a would be to much for this truck or my fc 600. The weight difference between these and stock isn't much at all
I think they would still be a bit much for the HyperGo, though they are a bit smaller than the ones I tried here so they may not be too bad.
They should work well with the fc600. I believe that has the same motor as the hbx 16889a pro. If it does, you could even go with the ones I tried in this video for that. 👍
Might not have been because of the tires. Had stock tires and and jumping it very mildly in comparison to you and 2 of the spider gears in the rear turned to dust. All 4 screws in the rear diff were loose and almost out so probably not tightened from factory. That's what I get for not checking. Still can't pick a favorite though. The hypergo and the fc600 are tough and a lot of fun
Yes they’re great! Lots of complaints on the HyperGo diffs but the bigger tires certainly made it go faster for me lol
I use these tires on my 901A (but the tire profile mounted the other way around). They work great, but I only bash in the forest on lose surface. They also look great on your 16889A pro.
I like them on my 901a as well. They work great. The 901a is a bit more fragile if you’re not careful (like me lol)
I bought the brushed Hosim branded versions of this truck with the gps and oil shocks on sale. I already have a brushless system I plan to put in it. My problem is the shocks. I opened the truck and saw the front and rear covered in shock oil. When I opened up the shocks I noticed the bladders were chewed up around the edges on all four of them so there is no seal holding the oil in. I contacted the manufacturer but never got a response. I got a second truck from Amazon and it has the exact same problem. I know this is a cheap RC and half expected the shock to leak a little over time but one run after refilling them and there was oil everywhere. My shocks have a silver body and I noticed the brushless trucks come with shocks with black body. How are the shocks on your truck?
Wow that’s crazy. Mine are all fine. No sign of leakage, but the shocks on this brushless version definitely have much thicker fluid in them. The shocks on my older brushed version were not as good, but I don’t recall any leaks. Maybe had no fluid in them at all.
@@DerbyCityRC Thanks for the reply. I put a set of 70mm shocks from RCAWD on it for now. The bore on them is smaller than stock but they seem to be working out ok. Amazon has the shocks that come on the brushless for sale. I'll grab a set now that I know they're decent. Love the channel man!
Awesome!
Thanks man!!
I think the differential is the weak point of the hyper go. Mine broke with stock everything while using a 3s battery
Oh it’s one of the weak points lol
WOW! I bought one and it came with 2s, what 3s battery should I buy?
I can’t find it on Amazon right now for some reason, but here’s a link to the bezgar website. They have a 3s battery that looks identical to the 2s one.
affiliate.bezgar.com/3ZD6kjJ
What if we put the h14bm wheels to 16208 will it run normal without breaking.
The 16208 ha pretty weak diffs. It may not break as quickly but depending on how you drive, they will still wear out or break quicker than with the stock tires…in theory.
Broke the same screw 2😕 what's the Diameter of those tires? Also where U get the spacers from?.....Brian
Dang!
If I remember right, these tires are 125mm.
Here’s the wheel spacers: amzn.to/3K8nMab
@@DerbyCityRC Kool tyvm broke the teeth off the spur gear 2 😦 but got upgraded 1 from Amazon 👊👍✌️🦅🇺🇸🦼
How do you find parts for the 2995 ?
Haiboxing-hobby.com and if the part you need isn’t listed, just send them an email with the “contact us” button
Do you have Lipo charger recommendation?
Not really lol. Except for my larger capacity batteries, I just use one like this:
amzn.to/3kLuOrb
They are tough lil trucks , i bash mine around all the time, i have the h16bm and the jjrc q117, i love both of them , dont know witch one is faster
Don’t have the q117, but it does look good!
What size extensions did you buy
15mm
Any link for the knuckle that broke and screws?
Order the parts for an hbx 16889a pro from pxtoyrsrc.com. The hbx plastics are better and the part is the same!
@@DerbyCityRC thanks
We NEED the merge of these two😂!
I ended up with a different merge lol
@@DerbyCityRC man I’ve got about 600-700 bucks I can spend on rc’s don’t know weather to buy this mjx and a drift truck and haiboxing 16889a pro and a buggy like ya got from them and wltoys 144010 or buy one name brand leaning towards getting multiple instead of just one… idk whats best tho
@DevotedRC I think if it was me I’d get a 4s Arrma, and then that red Challenger drifter I just reviewed.
Which one has a thicker cvd driveshafts and dogbones, is it the mjx 16208 or the hbx 16889a pro?
I already have the hbx 16889a pro but the cvd driveshafts and dog bones always bent, i already replaced them 4x.
Is the mjx 16208 cvd driveshafts and dogbones more durable?
Can it fit to hbx 16889a pro?
Thanks for the answers!
The mjx has the thicker bones.
I believe they will fit, but you need to replace the diff drive cups with the mjx ones. Possibly the hubs too
Which one is more durable?
New to everything here, I'm looking to get our first car and narrowed it down to the two in this video, on standard tyres which is the better choice for a beginner and a 6year old to learn with the hyper go or hbx?
For durability, I’d go with the hbx. Also, the hbx you can turn the speed down more for training. The mjx you can only do either 70% power or 100%
The mjx has a slight advantage on speed, but overall I really like the hbx 16889a pro more. Also, if you did decide to upgrade wheels, these oversized ones actually DO work well on the hbx.
@@DerbyCityRC hbx it is then, cheers.
@@DerbyCityRC ill defo try the larger tyres in the future, I'll just have to wait a while before telling the mrs I'm gonna spend more money 😅
Awesome choice!!
What brand those bigger tires? And what size?
amzn.to/40Q9Re7
So having a less powerful HBX makes it the 1/16 king?
The hbx has more bottom end torque, not less, so it handles the larger tires far better. Also seems to be more durable. However, the mjx beats it at top speed by a few mph on 2s. I’ll know more and may even change my opinion when I finish my HyperGo vs hbx video
Is this your great new house? Congratulations.
It is!
I showed it a bit more in our last video with our new Arrma Senton.
Thanks!!
Can someone help me? I have a hyper go... If i lift the car the wheels spin... If i put it on the ground it wont drive (very slow) its like some gear is slipping what do i need to replace?
Could be the set screw backed out of the pinion gear if the motor. Also check all axles to make sure they spin with each wheel, this could help you find a broken one that’s hard to spot otherwise. There would have to be a front one and a rear one broken at the same time to cause no movement.
Thanks dude! took it apart look like my rear differential exploded it came out in a million pieces a screw broke inside the gear and wrecked everything inside :)
@ronsone8373 you’re welcome! Diffs are definitely the weakest link on these!! Get the upgraded replacement!
Happy new year.
It's a very educational video.(*^-^*)
Thank you very much.
You too and thanks so much!!
I just got one mines will for lil then it will stop need help
Problems are never good. Are you using the stock battery or a different one?
Are the diffs interchangeable? Seems like the weakest link on the 16208
They are. But you need to swap the diff cups. I believe they now sell the hbx diffs as “upgraded” diffs anyway lol
@@DerbyCityRC Yea I've seen the upgraded ones, I am unsure if they are steel like the 2995 though
Honestly I think they’re the same differential mine the cups loo
@@DerbyCityRC Lol, what?
Lol I meant minus the cups lol.
I think the hyper go “upgraded” diffs are just the ones that hbx uses, except they need the HyperGo cups. HBX all the way!!
Hi Evan! Nice new place where you live now.
I have a general question concerning RC-cars.
Did you ever have a burning battery? I asked, because you drive your cars very hard and i suppose you use old batteries as well. I live in a flat and i'm a little bit afraid about the storage of the batteries...
Hello!
Good question. I have not had any batteries burn up on me, but I still take precautions because it definitely can and does happen.
I keep all of them in a metal tool box. When I charge one or more of them, I also keep them in a lipo bag AND inside the metal box. I have a few batteries that have gotten puffy or lost a cell, and I’ll be disposing of those in the next video.
@@DerbyCityRC Do you have a special fire-extinguisher for LIPO -batteries?
I don’t have one specific to lipos. I do keep a standard one in my garage.
Do they need a special unit?
I’m not even sure lol
I know water doesn’t work well.However water would probably still help keep surrounding materials from catching on fire.
@@DerbyCityRC Search for "firexo". It recommended to extinguish Lipo-fire
Thanks!
What size tires are the biggies?
About 4” in diameter amzn.to/3Jgn5vt
There’s an upgraded diff (16420Y) but it’s been unavailable for a while now.
Gonna have to upgrade the truck, for stronger parts 🤷🏻♂️
Yup those came out like right after this video
@@DerbyCityRC And someone bought them all lol
Apparently they did lol
I'm a 1:47 into the video with a prediction. The bigger tires shred those diffs with the 3S. The stock tires and the 3S on mine. It blew the rear diff out on the first drive. I guess its normal since it comes with a leaflet that talks about it tucked inside the Car's manual x.x. Maybe you'll have better luck than me lol
Haha! Good prediction!
I don’t recall a leaflet. lol what did it say?
@@DerbyCityRC it has written down. "I found that the car has no 4WD, only the front or rear wheels have power" it's response is "Our car is designed and produced according to 4WD structure. If this problem happens it may be that the differential on the no power side is damaged and needs to be replaced. For the specific damaged parts, you can check the corresponding exploded view of the disassembled differential." Then it has an exploded view and the diff on the side. So yeah, they know they break easily. Lol
I want to replace stock tires/rims with street setup what is the size I need thanks
12mm hexes with 4mm arbor holes
@DerbyCityRC thanks alot , keep up the great content 👍 🍺
Also do u recommend a good street tire for it as I am still looking , thanks again
@db2955 haven’t tried any yet unfortunately
got the MJX HyperGo 16210 and the servo is very weak even at stock. Differential housing is plastic and the gears look very rough. This was a bad purchase. Can't even return now.
The gears have definitely come out as a known weak spot. They’ve come out with upgraded versions. Hoping they’re putting them in the production cars now. They tend to last a decent amount of time still, especially if you keep it on 2s. Maybe worth a quick diff swap and keep running it.
3:21 that thief barely made those stairs ha ha ha
Now we have the mug shot AND we know he's not very fit 😂🤣
Lol. That thief quit exercising when his twins were born 18 months ago and really needs to get back at it…
Or so I’m told 😂
3s looks too much on this sub 1kg 1/16...2s is more than enough for bashing fun and transmission lasts many many hours.
3s was pretty fun with the stock tires.
And flips great with the big tires, it just can’t handle them.
I do agree 2s with the stock tires is more than enough for a 1/16 scale. 👍👍
With the bigger tyres it looks a little like the MT10. Thumbnail almost caught me lol
Very similar in color for sure! But this things got nothing on the MT10 lol 😂
How big the tires are
105mm
Hi there I'm about to spend £450 max any ideas I'm in the UK maybe you guys can help me. Keep up the good work ✌️
What would you say are your top choices?
OK 👌 Rival MT-10 thanks
Found what looks like a hyper-go H16 E ( under different brand name ) for $46.59 right now on clearance from $119..
It has the gps in it and all. If interested, hit me back and I'll give you the info.👍👍
Possibly! I’ll take a quick look at it.
Thanks!
@Sky don't see it for that price now
👋 hi mjx or remo ?! Better is ?!
I can’t say for sure, I don’t have a remo
Hbx a pro still the best. Thanks. I'm choosing right now.
Yes!!! In my opinion it sure is!
Depends on what you're after. Out of the box and with stock everything, the MJX 16208 is still better imo, as it's quicker both in 2S and obviously 3S, has honeycomb chassis, chunkier CVD's, fan on ESC, more grippy tyres, body mount system without clips, 3S support as standard, plus is just as if not more durable out the box. The HBX Pro takes to bigger tyres better likely as its motor is less powerful, along with the gearing to match. Think of the MJX as a tuned HBX, obviously the more weight/pressure you put on an already tuned vehicle, the more critical strain you put on the parts vs the non tuned vehicle.
@@nib95 I chose hbx. This is the first rc for my 7 year old son. Endurance was the most important thing.
@@nib95 I've spent hours looking in to which one between the two is more durable and pretty much everyone has said the hbx. I've seen a fair few videos where the fan on the mjx has broken completely and other parts have failed or been damaged while the hbx is rarely broken at the end of the session. I'm also looking for a car for my son so chose the hbx purely on what I've seen time and time again, the hbx is just stronger.
@@thedeeptone1986 You're talking about in extreme bash tests, and the HBX does not have a fan for that to break in the first place. You have to compensate for the fact that reviews are nearly always running the MJX in 2S AND 3S, and 3S is considerably faster than 2S (40mph vs 26mph on the MJX, vs 24mph on the HBX). Obviously if you're running something 70% faster, it's going to be more likely to take damage. The fact that it's still comparably durable despite being so much quicker, is a testament to its durability. That's why the MJX has the extra little features such as the thicker dog bones/CVD, honeycomb chassis, clipless body, fan on the motor etc, all to compensate for that added potential power, and with it, more acrobatics, flips, much higher airtime/height on jumps etc.
For a young child, I think the HBX is a superb, bullet proof choice. However I would say that in 2S, the MJX and HBX will be comparably durable (the MJX fractionally quicker), the MJX perhaps a tad more convenient due to the clipless body attachment design. But with the MJX you do have default support for 3S should your son ever desire more speed/power, something that can be unreliable with the HBX (diffs often go out with 3S on HBX). Overall, you can't go wrong with either choice, but the MJX does offer more bang for buck imo.
Good thing you don't run like a criminal!
😂 I’d never make it!
Go somewhere on a sand field to drive, you won't see top speeds in a cramped yard.
I wasn’t looking for top speed in my yard here, but I agree.
adding “bigger” tires isn’t an upgrade anyway. Try using better tires next time. FAIL!
Thank you Paul. I will add this to the suggestion box for further review.
haha i smell bull
That’s a weird thing to confess.
I love lamp!
great minds think alike!! check out my "BIG SHOES" episode. this was a fantastic watch! the 16889a is my favorite, too! omg those super sends!!!
Haha! Ok I’ll check that out!
Yes that darn hbx still comes out on top lol and it’s great with the larger tires. Minimal rubbing and great control!
@@DerbyCityRC i REALLY like how you crafted this whole thing into a promo video for the security cam. bro, that's genius!
Thanks lol.
They asked me to do a full video and I said no, I’ll do a short, informative ad. It will get more views that way. I still posted that ad as a stand alone video out of curiosity. I thought that camera was a good deal and it definitely works well so I did it 👍