Concentric Reducer Fabrication Template (how to build a cone)

[@dennispittman4555]

Thanks for the video... makes my fabrication much easier

[@sarmantech]

VERY NICE. your video is so easy to understand. i learnt another method of fabrication. Thanks.

[@TECHNICALPIPING]

welcome...

[@fuxluck1]

Out of all the videos on TH-cam about this, you said nothing but explained more than any of them! Thank You.

[@jbaker8871]

Great job no bs nailed it!!

[@JasonSpasoff]

Thank you for this video! Very easy to follow and translate into AutoCad!

[@buddydog1956]

Good music ~
and good demonstration as well ~

[@philliparudolph9595]

thank you soooooooo much, I've been looking for this method for months

[@KrishnaKumar-me3wt]

hahaha......

[@jamesnasmith984]

Nice demonstration. PS: 1.5” is 38mm and 4” is 101.6mm

[@ramaiahmuthupandi1188]

Thank you so much , just easy to learn this videos

[@ramaiahmuthupandi1188]

please demonstrate 90 degree elbow ( Radius 210 & 5 section )

[@mudlakesawmill9332]

Thank you Its so simple and easy

[@sivatejaaddala6186]

superb bro,i been searching for a while,,thanqqqq bro,keep it up

[@sivatejaaddala6186]

@Jeremy Kenneth did it worked

[@kailas170]

this is very good vedio tutorial Thanks

[@cherrysolomon8889]

You are the only who knows what you doing no explanation? God damm it

[@iconenterprises5900]

very usefull. thank you

[@spanxplays1290]

thank you for the rejuice:)

[@אביבןחמואחלההסבר-פשוטלעניין]

so simple

[@haranadhss3132]

Super video sir 😀

[@ajitmohanty168]

Nice.. 👌👌👌

[@SadikKhan-zu7ug]

Why you divided the circumference by 12

[@Chris-adams-rc-journey]

For ease of measuring a curved line. Without the use of string or wire to lay along the line. The more you divide it, the more accurate it is. It's like messing a curved line with small straight sections.

[@renatanirman194]

What happens if we divide the length of circumference by 2 in case of twelve?

[@kanireddykumar9140]

Nice video frind

[@CR-zc4bc]

Video clip so good...and i have a question why we dividing by 12

[@farmtoflameenergy]

May I please ask where you got the pencil protractor from. Mine cannot do such a wide angle as seen in 1:45

[@TECHNICALPIPING]

In Stationery shop only..

[@farmtoflameenergy]

@@TECHNICALPIPING thank you kindly

[@hagensteele4447]

This video makes me want to punch the guy that originally taught me how to do this in the head, as your method is FAR superior.
Thanks for the upload.

[@RajeshKumar-cw8wb]

Nice sir

[@hareramprajapati813]

very nice

[@iceyaj3167]

confusing. where did you get 12?

[@UdayKumar-qk8st]

Thanks for massage

[@Tomsoffroadandcustom]

Thank you

[@AsokVisva22]

Thanks a lot

[@vsujithnarayan]

Super

[@murthydaarapureddy6956]

Thanks bro

[@harimohansharma]

What is the maximum size of cone will be fabricated from 2 nos 1250mm x 2500mm metal sheet ?

[@travelertui5609]

1"=25.4
How 4" = 114mm
?

[@singhsainigagan3079]

same doubt

[@TECHNICALPIPING]

As per pipe std(ASME) dimensions

[@davetickner7302]

What about a tapper. With a 45 degree Y branch take off. Say 8" to 12" on centre tapper With 8" 45 degree Y branch.

[@itssandesh_0171]

Same formula would mein banane ka kaise banega

[@nnnitis]

I didn't understand after 29.8 mm came what you did after that? Please explain

[@chandanyadov3607]

Jhakas

[@itssandesh_0171]

Same formula wooden mein banana rahega to kaise banega

[@iftekharalam82]

Eccentric reducer needed

[@jaimecalero6938]

Excelente como hago para conseguir un libro donde se explique mejor paso a paso

[@mushtaqmirza9390]

good job i have a question why 258÷12

[@neelendrapandey3360]

How can you know cut to division by divider because of is round u cut division state

[@giruchavadallavar8764]

Can we get eccentric reducer fabrication template.

[@donnysajan8627]

Why we divide by 12..? Can we divide by any other number

[@skmontu5299]

Something is learning

[@recepgun8692]

thanks for sharing :) i did nt get how to calculate "H" and is there any standart for this calculations ? ( especially EN )

[@Z750Kawasaki]

Tnx ☺

[@jana-sundaram]

plz demonstrate 90 degree elbow making..

[@TECHNICALPIPING]

watch this video:Layout and Development of 90 degree elbow miter bend
th-cam.com/video/Kej98Ti0nqc/w-d-xo.html

[@rajangupta7921]

Nice looking

[@rogelioramos9437]

Excelente. Máster. No podrías realizar. En. Tuberia. Gracias. Saludos desde veracruz ok

[@kadiransari4107]

How did you get 102mm

[@rvshungama8684]

NIce One

[@mohdafak7877]

Nice

[@bigrockets]

how do you get 114mm out of 4 inches, and 48mm out of 1.5"? Your math is haywire, but the rest of the video is good

[@mirajiew4944]

how take Height any Reducer Please Describe

[@rajendrakolikoli2310]

Ecentriy reducer kaise bhany

[@amolghagare3439]

Tq sir

[@jogendrarout5867]

Bhai jiska dia 5mtr/1mtr.
Height 6mtr ho kese part part mn karein.

[@rajesh.v.brajesh5914]

I want to marking ofpipe

[@saketmishra3854]

Esme division kya liye h 12

[@rajendrakolikoli2310]

Tanc kaise bany video send carona

[@chiku36]

Its more than 120mm

[@jvsnewproduction4419]

I want drawing of dai 3.2meter to 4meter how to draw please send me

[@Ashokjssaten]

Why you just divide the circumference in to only 12 parts

[@chiku36]

It doesn't look like both dia matches to 48mm and 114mm
Plz check it again

[@anjanisah705]

Bachha vala con hai y to top daya 3500,bottom daya 2500 high state 4000 mm ka video all size mm me hai

[@vijaysekaran7061]

BIG DIA 250MM, SMALL DIA 252MM CAN YOU MAKE. YOUR VIDEO IS NOT SUITABLE FOR MY DIMENSION

[@mirajiew4944]

And also make Eccentric Reducer

[@quality_handicrafts_trophy8587]

What about the height 102mm? Height will be not 102mm after cutting the paper!! Sorry it's ok! Thanks finally.😂

[@mosokat5160]

Hai

[@TECHNICALPIPING]

Hi

[@toivoshatimwene9182]

You are just doing your things and you re not explaining.. And the way you re noting is not clear.. Just didn't get any thing...
Hope you will try something clear now

[@אביבןחמואחלההסבר-פשוטלעניין]

very good

[@TECHNICALPIPING]

Thanks

[@mushtaqmirza9390]

good job i have a question why 358÷12

[@Tonys_Podium]

Mushtaq Mirza it's a shortcut to mark out the approximate circumference while minimising error. It would be more accurate to calculate the actual width of the chord. Try this online calculator/app: www.handymath.com/cgi-bin/onlinearcapp8.cgi?submit=Entry

[@mushtaqmirza9390]

FIREHAWK1979 thank you very much it is very helpful for me

[@Tonys_Podium]

Mushtaq Mirza here is an app that gives you all the measurements: cone calculator by Hasan Ramadan
appsto.re/gb/6BTpab.i

[@ryushinosuke9912]

ummmm...sorry for the noob question, is it always divided by 12?

[@muhammadimrandaya9800]

Very nice