हिंदी में नये व टेक्निकल वीडिओ देखने के लिये कृपया नीचे दिये लिंक पर क्लिक कीजिये और मेरे नये TH-cam चैनल “INDIAN TAREEKA” को SUBSCRIBE कीजिये. धन्यवाद. PLEASE DO SUBSCRIBE MY NEW CHANNEL- "INDIAN TAREEKA" LINK FOR NEW CHANNEL "INDIAN TAREEKA" IS- th-cam.com/channels/pCkDtwkUr0PbLcfiu4IGOw.html
There's a much easier way than the video if you mind skipping the ''maintaince'' done along the way. ---Go straight into toner reservoir from the endcap shown @ 5:00. Instead of removing all of that, leave the endcap in place, use a small circle drill to drill out the endcap to access the white plastic plug. Then use a soldering iron to open a hole in the plug(drilling would let debris into the toner reservoir) to use a funnel to add tonner. When finished there're all kinds of ways to seal the hole...duct tape, silicon sealer, etc., or my favorite, a small threaded fitting that would self tap into the plug(use a bit of silicon seal) with a cap so you add tonner later.
I forgot to pull the plastic ribbon from the cartridge in my HP Laser1010 printer. Yes I know that was stupid. Now the printing is grey. Can you tellme what went wrong?
Sir.. thanx for ur nice tutorial.. Which dry ink is best for refilling and how many grams of ink should i fill in hp 88A toner? Answer please.. Thanx..with best wishes..
for 88A/36A/78A, ITDL brand is the best, 80 grams should be used and make sure to use latest manufactured ink(toner). Avoid ink older than 3 months. Thanks
Why can i not find any video of what i need here ? I need to replace my toner cartridge. What i yank out of the printer is quite big. The replacement cartridge is like half the size. I have a feeling i need to take half off of the old thing and replace it, however, directions are SUPER vague, they don't even show half of it coming off or being put back on. I see videos of the whole thing being pulled out and shoved in, well duh. Then i see videos like this, taking the thing apart, i don't need to do that, i cannot find anything of what i need to do. I just have an ink123.nl 12A which is an HP Q2612A/Cannon 703 replacement, for my HP Laserjet P3015. Which seems to be very correct.
Canon 303 cartridge refilling k baad print to thik that ho Raha hai par cartridge k andar dust ink bohot jam raha hai. Aisa kyun ho raha hai? Please help.
मै तो आप वीडियो में जैसे कैरिएज का pin निकलवाएं उसीथरा मेमुजे एक ही पिन को निकाल पाया। दूसरा पिन को नहीं निकल पाए। हमारे पास जो १२ A cartridge है वो ओर्जिनल वाली है। उसको कैसे निकलना पड़ेगा उस के बारे मे कुछ जानकारी दि जी ये।
नमस्कार सर जी हमने रिफिल किया लेकिन ड्रम की लेफ्ट साइड क्लीन नहीं हो रही है , और लेफ्ट की पूरी साइड की प्रिंटिंग थोडीसी काली और अक्षर फीके प्रिंट हो रहे है | तो इसके लिए क्या किया जाये ?
where can I buy that hook tool to remove the 2 pins on the sides? Is it available online in India? what is its actual name? Removing that 2 pins is the most difficult part.
There's another video out there that the guy drilled a hole on top and put new ink, then closed it with tape. He was done under 5min, What do you think about that?
this hurts my eyes. also youre using hard steel tools on soft printer parts and metals .... this can't be right .... you should delete this video now pls
![[TH] 2024 PMGC League | Survival Stage วันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/FVFT-PFwU80/mqdefault.jpg)
हिंदी में नये व टेक्निकल वीडिओ देखने के लिये
कृपया नीचे दिये लिंक पर क्लिक कीजिये और मेरे नये TH-cam चैनल “INDIAN TAREEKA” को SUBSCRIBE कीजिये.
धन्यवाद.
PLEASE DO SUBSCRIBE MY NEW CHANNEL- "INDIAN TAREEKA"
LINK FOR NEW CHANNEL "INDIAN TAREEKA" IS-
th-cam.com/channels/pCkDtwkUr0PbLcfiu4IGOw.html
There's a much easier way than the video if you mind skipping the ''maintaince'' done along the way. ---Go straight into toner reservoir from the endcap shown @ 5:00. Instead of removing all of that, leave the endcap in place, use a small circle drill to drill out the endcap to access the white plastic plug. Then use a soldering iron to open a hole in the plug(drilling would let debris into the toner reservoir) to use a funnel to add tonner. When finished there're all kinds of ways to seal the hole...duct tape, silicon sealer, etc., or my favorite, a small threaded fitting that would self tap into the plug(use a bit of silicon seal) with a cap so you add tonner later.
Exactly! Taking apart a cartridge to refill it is dangerous.
Only because of you I refills my cartridge
Please try again without music. With commentary and orally guide, It will helps and support to those they are trying to open cartridge for first time.
Beautifully and Clearly done. Thank you.
Nice sir...
It is a nice and useful video. Starink toner/ink cartridge- start different.
apka sound vi dailye video ki satha to bahut achha hota. samaj ne me asani hoti our bhi
Nice way to show someone something. I commend this.
Thanks, such a nice video
HP 1020 refilling ke liye kon sa powder use kare
Ask retailer for 12A toner powder or search online 12A toner powder. Thanks.
nice work...
good information
Sir what is the lubricant used on doctor blade/wiper blade in Q2612A cartridge??? Please reply in English.
No lubricant needed for Dr.blade/wiper blade. Apply some dry ink/powder which you are refilling.
Thanks
Wow, is that complicated! I won't be refilling my cartridge any time soon.
It is not. I'll show how easy it is. My cartridge will be needing a refill after a while. At that time I will upload refilling videos.
@@M-DIY give link of your video
@@vineshkumar2267 th-cam.com/video/zHSyUvdVI8A/w-d-xo.html
Video is in english, I will upload hindi version later on when I get some time.
Can we reuse the the outlet powder?
Not worthy..
works great perfect !
bhai lockdown me toner nahi mil pa raha h to kya me ricoh 3510dn ka toner hp 1005 me use kar sahta hu kya
No bro..
Thanks for sharing
Sir hplaserjet 126nw me konsi powder refill krni hai plz reply
36A or 88A.
nice information👌👌👌
Refill done thank you
Nice way to explain adopted, but what is mobile number. Do you provide services at Shop
Sir ..in cartridge Hp 110A which type of ink is use plz reply
nice
All I have to do is remove one side put the powder in and close it, my cartridge is fine, only need refill.
What if wastage tank is full ??
I forgot to pull the plastic ribbon from the cartridge in my HP Laser1010 printer. Yes I know that was stupid.
Now the printing is grey. Can you tellme what went wrong?
Is it necessary to change green pipe
cam we refill MFP 138fnw catridge?
Where to buy the ink?
Thax
How much does it charge if we do it in market
Mere ko iska powder chahiye thock me aur cartig. Chahiye kaha milega
Is this refill done with powder or liquid? 🤔
In this powder is used..
Sir.. thanx for ur nice tutorial..
Which dry ink is best for refilling and how many grams of ink should i fill in hp 88A toner?
Answer please..
Thanx..with best wishes..
for 88A/36A/78A, ITDL brand is the best, 80 grams should be used and make sure to use latest manufactured ink(toner). Avoid ink older than 3 months. Thanks
Thanx Sir.. wish u many success in future..
Once refilled it, how many pages will printer ?????
App. 1800 pages with 140 grams of ink. Thanks
Minimum 1500 pages...
Do we need to clean the cartridge Everytime we refill it?
Yes
Why can i not find any video of what i need here ?
I need to replace my toner cartridge.
What i yank out of the printer is quite big.
The replacement cartridge is like half the size.
I have a feeling i need to take half off of the old thing and replace it, however, directions are SUPER vague, they don't even show half of it coming off or being put back on.
I see videos of the whole thing being pulled out and shoved in, well duh.
Then i see videos like this, taking the thing apart, i don't need to do that, i cannot find anything of what i need to do.
I just have an ink123.nl 12A which is an HP Q2612A/Cannon 703 replacement, for my HP Laserjet P3015. Which seems to be very correct.
Please Instructor, I refilled mine but after I coupled it back it was printing blank page. Please whats the issue? Thanks
Perhaps you have missed connecting drum spring..
@@innovativeideas how does connecting drum spring look like
I refilled it but printer is still showing low black
(HP m126nw) plz help
Thanx!
Canon 303 cartridge refilling k baad print to thik that ho Raha hai par cartridge k andar dust ink bohot jam raha hai. Aisa kyun ho raha hai? Please help.
My toner burns ink on to the paper and it looks like bitumen was applied in to the paper
would have been better without music and voice audio.
How many grams or bottles of toner should I use when refilling?
Thubten In 12 A cartridge, 140 grams of bottle can be used. Thanks
What is the reason of leakage Cartridge 12A???? please give me it's solution ?
2 possible reasons are ---
1. Wastage tank is full.
2. Dr. Blade is degraded or expired.
Thanks
refiling ke bad catridge lagane ke bad white page ata he kia problem he printer model hp laserjet 3052
Rao Toheed perhaps you have forgotten to attach drum spring...
Kindly check that. Thanks
मै तो आप वीडियो में जैसे कैरिएज का pin निकलवाएं उसीथरा मेमुजे एक ही पिन को निकाल पाया। दूसरा पिन को नहीं निकल पाए। हमारे पास जो १२ A cartridge है वो ओर्जिनल वाली है। उसको कैसे निकलना पड़ेगा उस के बारे मे कुछ जानकारी दि जी ये।
Sir,how many grams does it contain?
Comes in 120 gms and 140 gms
नमस्कार
सर जी हमने रिफिल किया लेकिन ड्रम की लेफ्ट साइड क्लीन नहीं हो रही है , और लेफ्ट की पूरी साइड की प्रिंटिंग थोडीसी काली और अक्षर फीके प्रिंट हो रहे है | तो इसके लिए क्या किया जाये ?
where can I buy that hook tool to remove the 2 pins on the sides? Is it available online in India? what is its actual name? Removing that 2 pins is the most difficult part.
Thubten Bro, I have used bradawl and angled it's tip.
I have used a sharpened and bent bicycle spoke but those pins are very hard to push. Maybe cooling them would make easier.
Everything's nice, except for the trashy music
both the video and music is much better at 2x playback
Yes
Mere printer me ink extra fake rha hai kya prob. Hai kuch print krte hai toh page me ink ke spot aa the hai kya Kru???
kindly watch my other video for common cartridge problems th-cam.com/video/lJ_fE3nO3r8/w-d-xo.html
Headache Music informative vdo
R a vai ink ka link do na description me .
You have to go thru all that to refill the ink jet! This is so complicated MY God!!!! I'll just buy another printer, GEESH!!!!!!
There's another video out there that the guy drilled a hole on top and put new ink, then closed it with tape. He was done under 5min, What do you think about that?
What will you do next time if wastage tank is full. ??
@@innovativeideas burn a hole in the wastage tank as well with the tool
The music in the video has ruined it. We cannot hear any instructions
white line kiyu atha ha
हो सकता है कि ड्रम ख़राब हो गया हो या वाइपर ब्लेड पर कोई कट लगा हो. कृपया चेक कीजियेगा
I bought a whole new drum
Unload the bin
Music thoda kam banaya karo
Ok I have already followed for my latest videos. Thanks
That BGM is embarrassing....
Background sound is very worsted
I will not use it again. Thanks
13:45
Kisi ko chaiye to bata na
Bolke demo karo naa
In next video
goonga hy?
Difficult!
Tartigje
Chon chon ke aaye to
please write full problem
thoda muh seh bhe kuch bol deta toh kya jata tera , kuch samaj toh ata
Be kuch bolega nai
this hurts my eyes. also youre using hard steel tools on soft printer parts and metals .... this can't be right .... you should delete this video now pls
good information
Thanks
how much quantity of powder is required to fill the drum??