#ElectroTechCC
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Introduction
AC VOLTAGE CONTROLLERS (ac line voltage controllers) are employed to vary the RMS value of the alternating voltage applied to a load circuit by introducing Thyristors between the load and a constant voltage ac source. The RMS value of alternating voltage applied to a load circuit is controlled by controlling the triggering angle of the Thyristors in the AC Voltage Controller circuits.
In brief,an AC Voltage Controller is a type of thyristor power converter which is used to convert a fixed voltage, fixed frequency ac input supply to obtain a variable voltage ac output. The RMS value of the ac output voltage and the ac power flow to the load is controlled by varying (adjusting) the trigger angle ‘α’
There are two different types of thyristor control used in practice to control the ac power flow
☞On-Off control
☞Phase control
These are the two ac output voltage control techniques. In On-Off control technique Thyristors are used as switches to connect the load circuit to the ac supply (source) for a few cycles of the input ac supply and then to disconnect it for few input cycles. The Thyristors thus act as a high speed contactor (or high speed ac switch).
PHASE CONTROL
In phase control the Thyristors are used as switches to connect the load circuit to the input ac supply, for a part of every input cycle. That is the ac supply voltage is chopped using Thyristors during a part of each input cycle.
The thyristor switch is turned on for a part of every half cycle, so that input supply voltage appears across the load and then turned off during the remaining part of input half cycle to disconnect the ac supply from the load.
By controlling the phase angle or the trigger angle ‘α’ (delay angle), the output RMS voltage across the load can be controlled.
1. 3 Phase Inverter_180 & 120 Conduction Mode: • #ElectroTechCC How to...
2. Diode and Controlled Rectifier: • #ElectroTechCC How to ...
3. Examples of DC to AC Converter: • #ElectroTechCC Importa...
4. Examples of AC to DC Converter: • #ElectroTechCC Importa...
5. Important Equations of Chopper: • Video
6. Examples of Chopper: • #ElectroTechCC How to ...
7. Speed control Techniques of Synchronous Motor: • #EletroTechCC How to c...
8. Power Electronics Circuit Simulation Tool_Multisim: • #ElectroTechCC How to ...
9. Electronics Project Simulation Tool_Proteus: • How to generate PWM wa...
10. Induction Motor Drives: • Playlist
My channel publishes videos that focus on Electronics Concept. If that sounds like it could be helpful for you, please join me!
The trigger delay angle ‘α’ is defined as the phase angle (the value of ωt) at which the thyristor turns on and the load current begins to flow.
Thyristor AC Voltage Controllers use ac line commutation or ac phase commutation. Thyristors in AC Voltage Controllers are line commutated (phase commutated) since the input supply is ac. When the input ac voltage reverses and becomes negative during the negative half cycle the current flowing through the conducting thyristor decreases and falls to zero. Thus the ON thyristor naturally turns off, when the device current falls to zero.
Phase control Thyristors which are relatively inexpensive, converter grade Thyristors which are slower than fast switching inverter grade Thyristors are normally used.
For applications upto 400Hz, if Triacs are available to meet the voltage and current ratings of a particular application, Triacs are more commonly used.
Disclaimer -
Video is for educational purpose only. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
and with pwm? :( help