incline start / Code 10 / C1

Incline Start
You must start your vehicle on an incline and move off smoothly without rolling backwards, stalling, jerking or spinning the wheels. You only get 1 attempt.
Stop where the instructor indicates without allowing the vehicle to move backwards.
Apply the handbrake.
Select the neutral (manual).
Check the mirrors and the blind spot.
Signal intention, if applicable.
Select gear.
Obtain clutch control (manual).
Observe 360 degrees (Rear-view mirrors and blind spot if applicable)..
Release the handbrake.
Move off without rolling back.
Cancel the signal.
With an incline start, you will likely need to accelerate as well as obtaining clutch control in order to achieve enough revs to stop the car from stalling or rolling backwards

[@craigdownes6758]

Hi bro I pass my drivers on the 20 November bro🙏

[@morneorsmond319]

Congratulations 🎉🎉🎉🎉thank you for the update im extremely happy for you. Safe travels and enjoy the licence now you can drive freely knowing that you don't need to check where the traffic officers are 💪

[@Godfrey-o7u]

You are the best you made everything so much easier

[@morneorsmond319]

Thank you 💪

[@Keitumetsemulaudzi]

In the yard its not allowed to use the accelerator right?

[@morneorsmond319]

Hi, yes it's better not to use accelerator, it makes things more easier, and also for the examiner to keep up with you

[@Keitumetsemulaudzi]

@@morneorsmond319 thanks

[@aimeemujinga9506]

I have my test on 11th of January

[@morneorsmond319]

Hi, 💪 good luck and believe it will go well. Remember not to rush 👍

[@oldcomedies]

I have mine Friday, good luck for tomorrow

[@yamkelamafoco6528]

Thanks

[@morneorsmond319]

👍👍😁

[@craigdownes6758]

Hi do you just use clutch on a incline with the C1

[@morneorsmond319]

Hi, i lett student hold the footbrake and then start to release clutch untill there is enough clutch control for truck to move, your foot on the clutch must just be very steddy while you release the footbrake the foot on the clutch should not move this works quite well i don't lett students use accelerator cause the truck has enough power to move off from the incline and i realized when students use the accelerator the don't find the right half clutch to move off

[@craigdownes6758]

@@morneorsmond319 yes I understand and if you let the truck have a heavy vibration with the clutch and then release the handbrake will it work

[@craigdownes6758]

I do it with a heavy clutch control the truck will vibrat and a little accelerate when the truck start moving forward then I release the clutch

[@morneorsmond319]

@@craigdownes6758 it wil work 100% i always say the more it vibrate the better 💪 when i also teach my students te half clutch i made a mark on my dash where my ref counter is when you are at the mark it works perfect

[@craigdownes6758]

@@morneorsmond319 thank you you are good in what you do best of luck always my test date is on the 14 July that Friday 🙏