I got the analog meter kit a couple weeks ago and it's great! Really cute little meters with a nice warm glow. Fairly accurate, too They are easy to calibrate if you have a signal generator. Set it to 1000Hz @ 1 volt and connect to the meters. Adjust the pots on the board to give a 0VU reading.
Accidenti se son belli, ma Daniele la pazienza per montarli è una tua virtù. 225 micro led?!? A me son cascati tutti in terra prim'ancora di ordinarli!!!! Scusa, toglimi una curiosità ma al video 2 hai avuto problemi di candeggio o eravate in due? No perché vedo una manica bianca a destra ed una nera a sinistra..... 😅😅😅 Sei bravo davvero, io vengo dall'elettronica anni 80 con saldatore ELTO BLITZ rosso con lampadina cilindrica... e cose così microscopiche già le vedo volare dalla mia finestra!!!
This is all well and good, but a serious spectrum analyzer should have 32 frequencies. And most importantly, the column of the left channel level indicator should be located next to the right channel indicator (so that you can easily compare the levels). Not above, not below, but next to. And so on for each frequency with a red indication of peak values with a delay. Choose the type of indicators in such a way that the indication does not fade after 30 years of daily use (remember the faded indication of VCR displays from the 80s) . Choose the type of indicators so that the indication does not fade after 30 years of daily use (remember the faded display of VCRs from the 80s) Perhaps these are ordinary LEDs that do not work at the limit, but with a margin of brightness (saving their resource). Reliability is important here, not a disco of lights. The device should not introduce noise and distortion into the original signal on the oscilloscope. It will be a professional apparatus.
Impressive every hour. Just to bring back the old song at the end of the video .. You won't go wrong, because the channel was more recognizable for her that way.
Per le mie abilità e pazienza, quelli da "montare" non valgono il risultato finale (ovviamente ci infilo anche i gusti personali) ;) Alla fine per un progretto a cui sto lavorando i migliori sono proprio i "7" che per fortuna sono preassemblati :)
DON'T EVERY buy from Banggood if you want your money to be held hostage with NO available stock to be shipped out. WORSE CUSTOMER SERVICE EVER as NOT respecting and NOT doing the explicit request of the customer with legal and valid grounds from the unresolved issue!!!
I got the analog meter kit a couple weeks ago and it's great! Really cute little meters with a nice warm glow. Fairly accurate, too They are easy to calibrate if you have a signal generator. Set it to 1000Hz @ 1 volt and connect to the meters. Adjust the pots on the board to give a 0VU reading.
The most beautiful by far, the last ones.
Grazie 1000 Daniele !!! Essendo stato io adolescente negli anni 80 i miei preferiti sono i vu meter a lancette. li acquistero' sicuramente!!
Vedo che ti dai da fare molti progetti e mano ferma bravo complimenti. Come al solito sei forte. Ciao da cosimo
The first and the last one was my favorite. Nice video
Sei il TOP. Non immagini quanto, ammiro la tua pazienza. Complimenti.
Lanalogico ha sempre il suo fascino.
Anche gli altri sono una bella attrattiva.
Great video. Good job!
Grande Daniele 👍
First and last are my favorites! Thanks much for video!
Amazing work and cool looking brother
Grandissimo lavoro. Complimenti dany, super like by Warmachine bodybuilding dal garage Gym
L'ultimo è il più affascinante
Awesome arts
Good job my friend, great video😃👊👍
Tenho alguns, e vu meter digital ou analógico mais uma boa música é simplesmente relaxante para a mente ✋
Complimenti. Ottime indicazioni 🔝
Excelente. me gusto mucho
Accidenti se son belli, ma Daniele la pazienza per montarli è una tua virtù. 225 micro led?!? A me son cascati tutti in terra prim'ancora di ordinarli!!!! Scusa, toglimi una curiosità ma al video 2 hai avuto problemi di candeggio o eravate in due? No perché vedo una manica bianca a destra ed una nera a sinistra..... 😅😅😅 Sei bravo davvero, io vengo dall'elettronica anni 80 con saldatore ELTO BLITZ rosso con lampadina cilindrica... e cose così microscopiche già le vedo volare dalla mia finestra!!!
Grazie Daniele
👍👍👍👍👏👏👏Como no se me ocurrió eso para mi lámpara😆😆
I always prefer two old nice analogue Sifam VU meter.
bellissimi progetti
This is all well and good, but a serious spectrum analyzer should have 32 frequencies. And most importantly, the column of the left channel level indicator should be located next to the right channel indicator (so that you can easily compare the levels). Not above, not below, but next to. And so on for each frequency with a red indication of peak values with a delay. Choose the type of indicators in such a way that the indication does not fade after 30 years of daily use (remember the faded indication of VCR displays from the 80s) . Choose the type of indicators so that the indication does not fade after 30 years of daily use (remember the faded display of VCRs from the 80s) Perhaps these are ordinary LEDs that do not work at the limit, but with a margin of brightness (saving their resource). Reliability is important here, not a disco of lights. The device should not introduce noise and distortion into the original signal on the oscilloscope. It will be a professional apparatus.
Спасибо за этот тест!
Excellent Work!!!
what soldering iron do you use? great video, thanks for sharing
what type of soldering machine do you use? thanks
Impressive every hour. Just to bring back the old song at the end of the video .. You won't go wrong, because the channel was more recognizable for her that way.
I don't understand what you mean, what a girl, what hackers. The video of the gentleman whose channel it is was commented.
You are simple best....
La nuova elettronica miniaturizzata su TH-cam 😍
can u say me, what soldering iron you are use, please ? What a horrible work to solder this microscopic small 225 LEDs !! much respect.
Ciao! Stupendi tutti, potresti aggiornare il link del primo che è scaduto? Grazie mille
UN GENIO!
Best work ⚒
Hey, great video. Is it have any audio audio input other than the power supply? Or it's just picking the outside sound using some microphone?
Osm brother ❤️👍
It's amezing 👍👍
What is the name of the circuit in the 4th row? Bangood is no longer on sale. Where can we buy it?
Brilliant work
Good 👍👍👍
Nice led
Super
Молодца!!!
Where can I get those LEDs?
6:12 Hahahah. Fossimo ancora negli anni '90, lo avrei messo come Vu-meter nel cruscotto della mia UNO.
Già mi vedo nel fare tutte queste saldature..🤔🚨
Good
It is like you went out of your way to show each item in a different currency….
So far the second one has alot of soldering dam
Ah como eu queria comprar peças assim mas não sei como
Sar first wala light kahan per milega
Eu faço as minhas próprias também
👍👍👍
A commercial BETWEEN EACH REVIEW? My threshold has been reached.. I'm outa' here!
Per le mie abilità e pazienza, quelli da "montare" non valgono il risultato finale (ovviamente ci infilo anche i gusti personali) ;)
Alla fine per un progretto a cui sto lavorando i migliori sono proprio i "7" che per fortuna sono preassemblati :)
Te lo dico in privato! 😁
Pollice su per l'assemblaggio...
Analogía
Tienes pulso de cirujano 👍
DON'T EVERY buy from Banggood if you want your money to be held hostage with NO available stock to be shipped out.
WORSE CUSTOMER SERVICE EVER as NOT respecting and NOT doing the explicit request of the customer with legal and valid grounds from the unresolved issue!!!
To bad all of them are not meters at all..
Leue
1-7 best others trash
Primo!
That is some crappy music
Super