Dear sir. I want you to know. Because of your video, I not only conquered my fear of a serger. But am crying with joy at the thought of knowing how to use it. THANK YOU with all my heart, THANK YOU.😆
Thank you for your video. I bought an old Brother serger (760) and even the owner could not fix it. She suggested to bring it to a technician which would cost me $165. But I thought maybe I'll try threading it properly first and saw your video. You saved me $165!! xxx
Paul. I watch this video EVERY time I need to rethread my serger. My lower looper is my nemesis but following along step by step with you, it works every time. You’re a life saver. Thank you thank you!
😂 Thank you! I have had this machine for a few years now and it's my back up serger. It gets used, but I keep it threaded with black thread, so it's not used a lot. I have only had to mess with threading a few times but I always have to look something up.
OMG! Thank you SO MUCH for the EXCELLENT video. I have had such a problem I thought there was something wrong with my brand new machine. I have literally watched about 20 different videos and have spent hours trying to thread and re-thread and then still got NO CHAIN and sat there wondering what I did wrong re-tracing everything and then starting over from scratch. I NOW see what I was doing wrong! No one has explained as well as you did about the bottom looper having to go over the top of the upper looper and in that groove or curved area over the top of the upper looper!! Everyone just kept saying after threading it pull it to the back, so that’s what I did! I’m too tired right now to get up to drag it out of the case packed it up to get ready to take it in for service) hook it up and try it one more time, but it will be the first thing I do when I get up in the morning to see if that’s what was causing my problems, but I guarantee it was. I think I ran it UNDER the upper looper thread or around the side or wherever just trying to get it to the back and then under the presser foot. Your detailed explanation and great video (at least your clarity on YOUR video was well enough I could see the eye holes of all the needles and I couldn’t see hardly anything on any of the others, plus they never explained about where the thread should be placed except pulled back and then under the foot). I’m SO THANKFUL because I was just about ready to give up and take a new machine for service, thinking I got a lemon or something!! God bless you! Keep making YOUR videos. You went slow enough and then gave great verbal instructions WITH EXPLANATIONS as you went that this is the BEST VIDEO ON THREADING THAT I’VE SEEN EVEN FROM THE BROTHER VIDEOS!! Thank you so much!! ❤❤❤❤
Thanks for this...I have had this machine for a while and haven't had trouble in the past. But today it just was not happening. Finally figured out the needles were not fully seated in the holder. Sigh...but still this was useful just so I could see that I was not completely insane on how I was threading it! Also you method of doubling over the thread and technique with tweezers was great to learn!
Thank you so much for explaining this so well. I have watched several videos and I must say they all confused me. Yours was so clear to me. Now I don't feel so intimidated. Thank you.
Thank you so very much for this video. I have a Viking husky lock 1003lcd… and I have a terrible threading it. The VHS (laughing) was such poor quality and who still has a VCR anyway. Your description of threading the lower looper was perfect! Thanks again.
Paul thank you so much for this excellent tutorial. You are one of a kind explaining and teaching in detail. You did an awesome job. Keep up the good job.
Dear sir. I want you to know. Because of your video, I not only conquered my fear of a serger. But am crying with joy at the thought of knowing how to use it. THANK YOU with all my heart, THANK YOU.😆
Thank you for your video. I bought an old Brother serger (760) and even the owner could not fix it. She suggested to bring it to a technician which would cost me $165. But I thought maybe I'll try threading it properly first and saw your video. You saved me $165!! xxx
Paul. I watch this video EVERY time I need to rethread my serger. My lower looper is my nemesis but following along step by step with you, it works every time. You’re a life saver. Thank you thank you!
😂 Thank you! I have had this machine for a few years now and it's my back up serger. It gets used, but I keep it threaded with black thread, so it's not used a lot. I have only had to mess with threading a few times but I always have to look something up.
You have made the best video of threading this machine.... and I have watched MANY!!!!
OMG! Thank you SO MUCH for the EXCELLENT video. I have had such a problem I thought there was something wrong with my brand new machine. I have literally watched about 20 different videos and have spent hours trying to thread and re-thread and then still got NO CHAIN and sat there wondering what I did wrong re-tracing everything and then starting over from scratch. I NOW see what I was doing wrong! No one has explained as well as you did about the bottom looper having to go over the top of the upper looper and in that groove or curved area over the top of the upper looper!! Everyone just kept saying after threading it pull it to the back, so that’s what I did! I’m too tired right now to get up to drag it out of the case packed it up to get ready to take it in for service) hook it up and try it one more time, but it will be the first thing I do when I get up in the morning to see if that’s what was causing my problems, but I guarantee it was. I think I ran it UNDER the upper looper thread or around the side or wherever just trying to get it to the back and then under the presser foot. Your detailed explanation and great video (at least your clarity on YOUR video was well enough I could see the eye holes of all the needles and I couldn’t see hardly anything on any of the others, plus they never explained about where the thread should be placed except pulled back and then under the foot). I’m SO THANKFUL because I was just about ready to give up and take a new machine for service, thinking I got a lemon or something!! God bless you! Keep making YOUR videos. You went slow enough and then gave great verbal instructions WITH EXPLANATIONS as you went that this is the BEST VIDEO ON THREADING THAT I’VE SEEN EVEN FROM THE BROTHER VIDEOS!! Thank you so much!! ❤❤❤❤
Great video. I don't own a Serger, but watched it to see how a Serger works, and your video explained the process very well. Thanks again.
Thanks for this...I have had this machine for a while and haven't had trouble in the past. But today it just was not happening. Finally figured out the needles were not fully seated in the holder. Sigh...but still this was useful just so I could see that I was not completely insane on how I was threading it! Also you method of doubling over the thread and technique with tweezers was great to learn!
Thank you so much for explaining this so well. I have watched several videos and I must say they all confused me. Yours was so clear to me. Now I don't feel so intimidated. Thank you.
Brilliant clear instructions with no waffle. ..Thank you. Subscribed to your channel
Thanks so much! Yours is the best video I’ve seen on how to thread the server!!🎉
Dear Paul, TYSM U ROCK! U REALLY HELPED KE THREAD!
Wonderful video on how to thread my serger. I have referred to your video a few times
Thank you so very much for this video. I have a Viking husky lock 1003lcd… and I have a terrible threading it. The VHS (laughing) was such poor quality and who still has a VCR anyway. Your description of threading the lower looper was perfect! Thanks again.
Paul thank you so much for this excellent tutorial. You are one of a kind explaining and teaching in detail. You did an awesome job. Keep up the good job.
Thank you so much for this video!!! The best at teaching
Thank you for this ,you made it so so easy to follow and video was brilliant
Thank you for this vedio,you are very clear in your instructions. I know I'll get it when I purchased my brother 😁
Thanks you so much.
how come the bottom thread always breaking
Thank you for this video!!!
Good job 👏 👍