it differs on each player, since each player has unique stats, with AE gears its more of what fits best to use, no hard standard on a job class. if a player has a lower pen and ignore def attribute, cursed armor would be best, if a player has 200 ignore and 80 pen without the cursed armor, then PDI armor would be best. its really a mix and match approach with AE gears. even on my own rath, since im low depo, the M.Atk accessories have more bonus for me than the P.atk ones. cannot have a fixed guide on a job class with all the new gears/cards. my advice on building a job class is, just improve on the lower stats your character has, balance all the requirements for instances. making more stats go over the requirements is better than having an all out on 1 specific stat.
the random attribute is very different on each armor, the best one should be soul cage with 20% Large dmg given that you meet all the requirement which is 80 pen 50 skill 200 ign def for legend instaces, psr one is different since its better to stack mvp dmg or pdi since the requirement is lower than usual
This was a sneak peak of what armor should look like depending on the most common attribute and most common stats that every player had.. Based on the calculation and based on the my pvp and pve test (outside this video) the output of my character was still the same.. Remember that handbook will also play a major role for each character performance due to its multiplicative ability.. Mine in far far far way higher than average players and I tried to do the most feasible test for everyone.. Thank you
@durk88 yeah i was so confuse between cursed armor + 15% pen or soul cage + dmg to large. My pen with cursed armor is 106%. So for weeklies is just better to switch to soul cage right?
Its an obvious answer... No body use phy dmg 15% vs 20% large.. that 5 difference is too much considering phy dmg can be defended by def while large is almost pure dmg.. pve or monster wont use large dmg.reduct...
20% dmg to large does not boost matk damage, my valk is 60%atk/40%matk so 20% dmg to large is closer to 12% dmg (before adding more dmg to large) on the other hand, PDI is easily stackable and easy to get to 100%+ meaning you've halved the efficiency, 15% PDI when you already have 100% PDI is only going to be 7.5% dmg with 2 mino card equipped and 60%atk/40% matk split the efficiency of 20% dmg to large is down to 8% dmg the positive of dmg to large armor is that you can maybe use only 1 mino in weapon for insight bonus (50% ign def) if you have other good weapon card candidate, the positive of PDI armor is that it affects all damage, and not just large size, but yes, almost everything that needs good damage is large size so it's not a big deal.
@@Senko13th rath is a physical build even though you need MATK as a multiplier.. you dont need MPEN and ign MDEF only MATK. so i go for 2 mino for my weapon. and as far as i know.. not all builds work on all hero , my build wont work with you either. its about building your own ACC what make best for you. but for all i know.. rath is not magic type.. its a physical type so going LARGE is good, aside for PVP..
@@nakzbatv7921 Mino is good on Rath/valk because you need ign def also, and her split between atk and matk is generally more in the direction of atk, no good AA RM uses mino because 1) they dont need ign def 2) with mdef to matk convert they generally have way more matk than atk and 3) 20% damage to element cards out perform mino for them, that is why RM always needs to change cards for every boss for optimal damage
You can compared it when the minimum parameter completed in each armor such as ign 200 pen 100. Then try it with three armor. All armor have advantages if we have full fill standard paramter.
This was a sneak peak of what armor should look like depending on the most common attribute and most common stats that every player had.. Based on the calculation and based on the my pvp and pve test (outside this video) the output of my character was still the same.. Remember that handbook will also play a major role for each character performance due to its multiplicative ability.. Mine in far far far way higher than average players and I tried to do the most feasible test for everyone.. Thank you
@@russ3a i dont ask about your far far far far very faaaaar higher because youre so whaleeeeee. Just meet the minimum standar in every armor. So that can called apple to apple testing. Because every char isnt same they have different parameter. There is better with horror blade there is better with voddo or dragon armor. It depends on min standar parameter ign 200 pen 100 i think every people can reach it. When min standar meet in every armor so you can really give good content i think. So because if youre whale you can compared that because youre WHALE. You have every eq and with their good Mora. Thankyou
But if my char dont meet the minimum standar i have to use armor that suit to me to fullfil minimum standar. If i need pen and ign i go to vodoo. But if i have meet minmum standar i use Horror or Dragon.
![Polishing Up Rathgricy! [Ragnarok M Eternal Love]](http://i.ytimg.com/vi/ZHKzwR3cqh8/mqdefault.jpg)
![Polishing Up Rathgricy! [Ragnarok M Eternal Love]](/img/tr.png)
Soul cage 10% random
why isn’t use 15% max
it differs on each player, since each player has unique stats, with AE gears its more of what fits best to use, no hard standard on a job class. if a player has a lower pen and ignore def attribute, cursed armor would be best, if a player has 200 ignore and 80 pen without the cursed armor, then PDI armor would be best. its really a mix and match approach with AE gears.
even on my own rath, since im low depo, the M.Atk accessories have more bonus for me than the P.atk ones. cannot have a fixed guide on a job class with all the new gears/cards.
my advice on building a job class is, just improve on the lower stats your character has, balance all the requirements for instances. making more stats go over the requirements is better than having an all out on 1 specific stat.
the best explanation there is...
the random attribute is very different on each armor, the best one should be soul cage with 20% Large dmg given that you meet all the requirement which is 80 pen 50 skill 200 ign def for legend instaces, psr one is different since its better to stack mvp dmg or pdi since the requirement is lower than usual
This was a sneak peak of what armor should look like depending on the most common attribute and most common stats that every player had.. Based on the calculation and based on the my pvp and pve test (outside this video) the output of my character was still the same..
Remember that handbook will also play a major role for each character performance due to its multiplicative ability..
Mine in far far far way higher than average players and I tried to do the most feasible test for everyone.. Thank you
@durk88 yeah i was so confuse between cursed armor + 15% pen or soul cage + dmg to large. My pen with cursed armor is 106%. So for weeklies is just better to switch to soul cage right?
Its an obvious answer... No body use phy dmg 15% vs 20% large.. that 5 difference is too much considering phy dmg can be defended by def while large is almost pure dmg.. pve or monster wont use large dmg.reduct...
20% dmg to large does not boost matk damage, my valk is 60%atk/40%matk so 20% dmg to large is closer to 12% dmg (before adding more dmg to large)
on the other hand, PDI is easily stackable and easy to get to 100%+ meaning you've halved the efficiency, 15% PDI when you already have 100% PDI is only going to be 7.5% dmg
with 2 mino card equipped and 60%atk/40% matk split the efficiency of 20% dmg to large is down to 8% dmg
the positive of dmg to large armor is that you can maybe use only 1 mino in weapon for insight bonus (50% ign def) if you have other good weapon card candidate, the positive of PDI armor is that it affects all damage, and not just large size, but yes, almost everything that needs good damage is large size so it's not a big deal.
@@Senko13th rath is a physical build even though you need MATK as a multiplier.. you dont need MPEN and ign MDEF only MATK. so i go for 2 mino for my weapon. and as far as i know.. not all builds work on all hero , my build wont work with you either. its about building your own ACC what make best for you. but for all i know.. rath is not magic type.. its a physical type so going LARGE is good, aside for PVP..
@@Senko13th its like your saying MINO is useless to RM becuase it need also MATK..
@@nakzbatv7921 Mino is good on Rath/valk because you need ign def also, and her split between atk and matk is generally more in the direction of atk, no good AA RM uses mino because 1) they dont need ign def 2) with mdef to matk convert they generally have way more matk than atk and 3) 20% damage to element cards out perform mino for them, that is why RM always needs to change cards for every boss for optimal damage
the soulcage had 10 of 15 Bonus stat. Cursed and dragon hat 15 of 15. bad comparison.
Sir Shadow offhand between dragon flame or divine eye ?
You can compared it when the minimum parameter completed in each armor such as ign 200 pen 100. Then try it with three armor. All armor have advantages if we have full fill standard paramter.
This was a sneak peak of what armor should look like depending on the most common attribute and most common stats that every player had.. Based on the calculation and based on the my pvp and pve test (outside this video) the output of my character was still the same..
Remember that handbook will also play a major role for each character performance due to its multiplicative ability..
Mine in far far far way higher than average players and I tried to do the most feasible test for everyone.. Thank you
@@russ3a i dont ask about your far far far far very faaaaar higher because youre so whaleeeeee. Just meet the minimum standar in every armor. So that can called apple to apple testing. Because every char isnt same they have different parameter. There is better with horror blade there is better with voddo or dragon armor. It depends on min standar parameter ign 200 pen 100 i think every people can reach it. When min standar meet in every armor so you can really give good content i think. So because if youre whale you can compared that because youre WHALE. You have every eq and with their good Mora. Thankyou
But if my char dont meet the minimum standar i have to use armor that suit to me to fullfil minimum standar. If i need pen and ign i go to vodoo. But if i have meet minmum standar i use Horror or Dragon.
What percentage of your fashion?
Ignore def required?
Can you do a ronin test to with fire accessories
Thanks sir, can I say, Dragon blood with PATK build is the best ?
Both for matk and patk build since the multiplier for both build is pdmg
soul cage was not in maximum random attribute..
Yes it was mentioned on the summary but you based on the estimate, the outcome will still be the same
Sir, may i know how many is your pen when you use dragonblood?
76% when matk based
82% when patk based
cool testing, thanks. wonder if you can do test on flame shield vs skel bracer vs vinkt for Rathy?
Skel bracer FTW
@@russ3a hi, i am sorry but can you help elaborate on why skell bracer is better than flame shield and vinkt for Rathy? thank you.
No test with acc mele sir?
Last set was melee accesso
Whats the total ign def for each armor?
100% based ignore def
Dragon blood and Cursed armor = Munak star + 3% ignore def from offhand star (18%)
While
Soul cage = morale 4 (20%
@@russ3a
So you only have a total of 100% ign def while wearing the armors?
That’s the base ignore def so if I equipped the armor, it will be additive
Soul cage = 120%
Cursed armor = 118% + 16% from armor itself
Dragon blood = 118%
Total mspeed?
good work, can you test at 200 ignore defense for all item thanks so much in next video
It doesn’t matter since 0% dummy can already answer your question
You have a stack on your blade of order maximum -50 ign def