Bosch Professional 9inch angle grinder repair: stuck nut, burnt cable all fixed 110v
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.
I just ruined my second grinder by putting too much pressure on the locking nut just as you showed here, I knew better after the first time!, so I always recommend having spare nuts so you are not tempted to use a vice etc and to instead go strait to cutting off the nut as shown here at the end.
Hi, yes, Hand tightening the blade is enough, the spanner is for opening it! I know that now!!
Owen, as you've covered before, its a time and effort calculation. If you add into that " I don't know bout lectrics" and you have a perfect waste scenario, cheers
And electrosity is dangerous. Probably need a professional!
@@bootsowen so just buy another cos it's less hassle. And so it goes on and you end up with a shed like Uncle Harold's, cheers
Thinking about the nut being mega tight and the old worn disc being below the surface. Do you think this grinder could have been set up this way to drive something else. The worn disc must have been fitted like that. The only other way that the nuts get that tight is when they rub against something when running, but who would run a disc like that and why? Cheers
It is one of those mysteries, I am still wondering how they get the figs in the fig rolls. I guess we'll never know!
Any tips on how to remove the lock nut bearing on the washing machine drum. I've tried using my impact driver it's just chewing the screw
Which nut? the one that holds on the pulley on the back?
@@bootsowen yes that nut I've tried Allen keys .just running out of ideas mate