ฝัง
- เผยแพร่เมื่อ 3 เม.ย. 2018
- How to clean, improve quality and repair Kyocera toner unit - Developer unit DV-1140E for laser printer FS-1135MFP (Entwicklereinheit für FS-1135MFP)
Toner cartridges troubleshooting guide:
• Toner Cartridge Troubl...
For any question or suggestion leave a comment
-----------------------------------------------------------------------
email: link.accessori@libero.it
other links:
www.emmegiricambi.it/
www.samsung.com/it/consumer/pc...
store.hp.com/us/en/cat/printers
www.brother-usa.com/printer/#....
------------------------------------------------------------------------- - วิทยาศาสตร์และเทคโนโลยี
This video left out a VERY critical and important step. After cleaning the unit, you must install a NEW toner cartridge and initialize the developer unit. In the settings, make sure it is set to initialize the next time the copier/printer is turned on. The machine will run, and say "Adding Toner" for 13 to 15 minutes. THEN you're good to go. I am a certified Kyocera Technician.
Do I always have to replace the toner once the developer unit cleaned
@@winnerd6772 I guess it's suggesting to not initialize an old cartridg, it takes a lot of toner.
@@DuctTapedGoat okay. Thank you
Where is this option to be found in the settings?
Please help...my TaTriumph Adler p- 5030DN have been printing blank pages...it was okay after I refilled the toner cartridge...but later started printing blank pages even the test page is blank???
I have been looking for a certified kyocera technician to service my MFP 1135 but with this video my machine is doing fine and back to neat quality print. Thanks author
Nice tutorial, thanks !
This helped me so much! The it guy didnt even know how!
Wonderful guide sir !
Many thanks
excelente video!!!!!
You saved me about $200. :)
Espectacular!!!!
*It prints like no other **Bestt.Digital** printer. i have always loved Epson for the colors they produce.*
And i hated epson for nozzles
merci bcp sa m'aidera bcp
碳粉盒上面的计数芯片，能不能重新设置，因为买不了单独的芯片
Then you need to initialize "new development unit" function on your MFP to add toner. Don't know how to force it on printer but it eventually happens after several turns off and on.
where am i going to put the tuner is it inside the container fixed on it or inside
Inside the container
Hi. I wonder if you could help.
My printer was not printing clearly so I followed your instructions to clean out my toner unit. There was LOTS of toner inside. After I had got most of the toner out, I used an old toothbrush to clear the remaining toner from the roller. Finally, I wiped everything clean with baby wipes.
After initializing the toner, the printer is printing nice and dark and clear but there are dark vertical lines all across the pages 😭 I have printed lots of pages to see if it would clear but it hasn't.
Have i damaged the roller?
Can this be fixed?
I'd be really grateful if you could advise.
Thank you so much.
Baby wipes are not good to clean the toner roller, they leave residues. I think you have to clean the blade of the toner roller and the toner roller with a soft cloth
hello sir my kyocera in a toner is low or replacement problums
what do you mean? you have to change the toner cartridge
Hello!!!
I have a KYOCERA 4550ci when printing document, it adds short red lines on the printed document. Please help me!!!
always in the same position?
I have a Kyocera Ecosys FS- 1024MFP , problem is when it on then show in display " Unknown toner installed PC". How to solve it?
check if the cartridge is properly seated, try to remove and reinstall the cartridge, if nothing works probably the chip od the cartridge is defective. is it an original cartridge?
hello sir i havve ktocera 2535dn that prints fine when printing front only, but print black background when printing front and back copies
Does it prints a background in all the sides of the sheet?
my kyocera1020 mf model ka kartige ink bhut jayda fekta hai half print ke saat paper bhut hi ganda print nikal raha hai kya kare
Kyocera printer page empty problem
Kyocera 1135 Developer Unit not installed, please help me I shall be very thankful to you
Hii.
I'm using kyocera 1800 taskalfa. When i press start button .the machine start scanning but suddenly machine hangs
What is the solution please help me
I think it's a mechanical defect, probably you have to brinf the machine to a repair centre. look at the scanner unit, may be there is something blocking the movement of the laser scanner. any error message?
hello sir, my m2535dn developing magnet not full toner paste on it
white space, how to get clear that problem ?
try to clean the roller with a soft cloth
just use soft cloth or with other fluid like brasso/sanpoly (cleaner) ?
I think i broke my drum unit whilst cleaning it... it is that exact unit.. but i cant find it anywhere to buy on amazon or ebay.. anyone know the exact speck for that drum unit please
This video is about the toner unit. Which drum unit do you need? FS-1135MFP?
I NEED CODES FOR KYOCERA KM 1650
My developer unit seems to be loosing toner anywhere.. Tried to clean the doctor blade - had a lot of buildup. Unfortunately that did not fix it.
Whole page is grey, black dots also in the back.
If I swap the developer with another one, everything is fine.
Do you have an idea what I could try, or is the unit toast?
May be the magnetic roller is worn. Try to clean it with isopropyl alcohol, remove all the old toner. May be it's damp.
@@viandant5 Alright, thanks I'll try that
@@benjaminberger9629 is it fine now?
@@winnerd6772 As far as I remember, that developer is sitting around in my basement waiting to be opened, since I couldn't fix it..
My 1370 shows it doesn't has revelator.
Thanks for this very interesting . How can I rectify low printing quality or fadeness printing..
Probably you have to remove all the old toner and insert new toner
If that works eventually, never allow your cartridge to be empty before refilling to help you keep print quality
I hve kyocera 1800 it shows add toner error on display how i can solve the said error
You have to change the toner cartridge
I hve. Chnged but it shows again
A new cartridge? this cartridge has a chip. it may have a problem with the developer, or the sensor inside the toner chamber is not working properly. try to claen the chip and the contact inside the printer
I have a problem with my kyocera fs1300d printers out white paper that didn't solve this problem
I think the problem is not into the toner unit but in the drum unit. check the corona wire and its connections. it could be a mother board problem also
Good jop
mine prints faint copy on one side of paper what could be the problem
drum unit non properly aligned with the toner roller, damaged toner roller bushings, developer low, frame of the printer deformed
Many ppl are saying that kyocera laser printer refilled with not original toner it will break after few hundred prints, when the rest of the original toner than left in the printer chamber will end. Is it true that you have to use only original toner woth kyocera printers?
Kyocera printers are quite delicate but if you use a good toner powder there are no problems
@@viandant5 good toner powder.. what brands are good enough for kyocera ?
@@lukecool6173 Most of the toners are good toner. It's important it's a dedicated toner
hello sir my Kyocera FS-4000DN Laser Printer error 1050 how can i clear this problem ?
here you'll find informations: printcopy.info/?l=en&mod=erc&brand=Kyocera&model=ECOSYS%20M3550idn&code=1050
Hi there, I have troubles with my FS-C5150DN, the message error says: call service 7404: 0001679 or 7404:0001709. Do you think it is possible to repair this by myself? Thanks in advance.
A problem with the toner unit. A defective sensor, poor contact in a connector, problem to the power board
My kyocera fs.1128 mfp cannot on the paper.....
What do you mean? white pages? It could have lot of causes, check the contacts between printer and drum unit, if possible try to change drum unit
Strate black line middle of the paper. How to resolve the issue
vertical or horizontal?
mine too horizontal line...
Hi sir, i have kyocera ecosys fs-1040 printer. When i print page everything is good except the middle of the page. On every printed page i don't have a text in the middle of page or the text is barely visible. Kyocera client says that i have 49% toner remaining. So i think the problem is in toner unit or drum?
I would be very grateful if you could help me
I think the problem could be the transfer roller or the toner unit, may be the toner roller or its blade is defective
@@viandant5 Thank you for quick answer! Is there anything i can do to try fix it?
@@dusandjuric7146 You have to remove and check the toner unit. Check if the toner on the toner roller is evenly distribuited
@@viandant5 Ok,thank you! Is it process with my printer similar like this video? I'm not sure that i know how to remove and check toner unit.
@@dusandjuric7146Yes, it could be similar
Is it valid for the dv-320, right?
It's similar, probably you can use this instructions
hello
My kyocera fs-1128mfp is printing including big black dotes
are they repetitive defects? at which distance?
@@viandant5 all over the page
@@ahmyaniali2102 with these few informations it's difficult to say, it could be toner too old or damp, drum unit, dirty transfer roller, defective fusers
@@viandant5 i've just checked the tonner case when i roll that trick i doesn't get the unified black color ...& sorry for my english
@@ahmyaniali2102 It could be the Drum, The Fuser, Or, the Developer. You have to check all three.
Salve,quando stampo l'inchiostro sul foglio in alcuni casi sembra non asciutto e risulta sbavato,quale può essere il problema?
E' una stampante a toner, non usa inchiostro. Forse è un problema ai fusori se le stampe sono sbavate o il toner non aderisce al foglio
@@viandant5 il rullo fusore l'ho cambiato tempo fa grazie a un video proprio di questo canale e avevo risolto il fatto che uscissero punti senza inchiostro,ora invece esce sbavato ma i rulli sono nuovi sia di pressione che del fusore
@@greenfluo2755 Potrebbe dipendere dal toner troppo vecchio o umido. In queste macchine il contenitore del toner è nella stampante e può anche rimanere lì per anni. Ogni tanto meglio togliere tutto il vecchio toner e sostituirlo con toner nuovo. Potrebbe essere anche l'unità tamburo, o il rullo toner consumato. Purtroppo senza vedere la macchina è difficile da dire
@@viandant5 ti ringrazio, comunque il tamburo è ancora lucidissimo,ho letto che quando è da cambiare si opacizza(?),mentre con rullo toner intendi pulire il rullo di trasferimento? Perché per quello avrei il video del canale come tutorial ahahah
@@greenfluo2755 il rullo del toner è il rullo coperto di toner a contatto con il tamburo. Il tamburo di solito è da cambiare quando è consumato, le righe sulla superficie sono il sintomo più evidente ma a volte può avere problemi anche se sembra a posto
If i clean this unit in the water? Will it have any problem?
Are you joking?
@@viandant5 definitely i did it already
@@xristosmanazis173 the humidity is one of the worst problem for the toner
@@viandant5 I didnt know it. Now it doesnt work. It prints white pages.. Maybe i have to buy a new one
@@xristosmanazis173 if there were not short circuits, may be you only have to wait until it's dry.
How to refill toner of kyocera 3212i
it's easy to refill, it's only a container but there is a chip
Is there any chip in FS-820
My printer says " improperly installed container " i have tried all ways but it's not fixing please help me
I think it's the toner waste container. It cpuld be a broken or defective sensor, or even the main board or the connector with the main board
The printer page turns out empty. The paper does not print anything.
THE CARTILILAGE ISNT PROPERLY INSERTED IN A WAY THAT ITS NOT WORKING,HENCE BLANK PAGES COMING OUT,REMOVE IT AND PUT IT IN AGAIN PROPERLY
I NEED CODES FOR KYOCERA 1135
Which codes?
मेने अपने kyocera 2040dn मे ड्रम नया डलवाया फ्युसर युनिट की सर्विस अच्छे से करवाई पर 4211 और 4209 आती ही है कृपया आप इसका सही इलाज बताये पेपर जाम होहि जाता है
Probably a paper jam or a defective paper sensor
Kyocera 1135 Developer Unit not installed, please help me I shall be very thankful to you
Did you try another toner cartridge?
@@viandant5 yes sir
@@zaidacity2788 remove the developer unit and check it for damage, dirty or disconnected connectors, or incorrect installation, then reinstall it and reboot the machine. Check the connector where the developer unit plugs into the printer
If the error persists, probably you have to replace the developer unit, but it could also be the electronic board