found this video with same car here, but then i found that the car seat i purchase nextfit zipmax, has a buckle in very front of the strap hook there, which cause the buckle cannot get through of the 1st seat loop hole there, the loop hole was too small cannot let a buckle get through.
That's good to see the way the tether goes. But pretty sure that's the rear facing belt path???? And also you should tighten the seatbelt before tightening the anchor strap. Please people go to someone certified in. Installing carseats as this is potentially dangerous
No that’s they way it’s meant to be done. You can’t get seats done by a professional every time you take the seat in and out. It’s easy to get it tight and secure once you know how to do it.
Thanks mate, not aire if this is the best or stupidist design. In one hand its easy in the other ive mever seen this design and now i have to bolt the seat back in 😅
Thanks for the video. Question I have is how do you then access the tyre jack under the seats with the baby capsule in place? Do you have to take the seat out each time?
Hi there, great question. I have only had four flat tyres in about 25 years of driving, so not too worried about getting one. Easy to take out and install the seats when you need too. Have two seats now also with a recent addition.
I have two kids in my np300 and it's fab, my husband has an xtrail which is ok but carrying a twin buggy and large dog just wasn't working. The np300 has all the space needed we we're very surprised at how comfortable the cab is along with the legroom in the rear.
This is a good video for the information it contains; but was it taken on a potato with a light source from the worst possible position? So hard to see anything in this video.
What about other Nissan Dual cab utes. Do they all have this toggle? I am looking at a second hand 2013 Nissan D series but don’t want to buy it if I can’t put a baby seat in it for my grandkids
Hi there, I’m not to sure about other models, but if it’s a dual cab I think it would be something similar as it would work if the seats need to fold down.
So glad I found this, as I have the same car and for the life of me I couldn’t work out how to stop the car seat from moving. 🙏🏼
Great to hear, that’s why I made it. If I can help someone out, that makes me happy!
found this video with same car here,
but then i found that the car seat i purchase nextfit zipmax, has a buckle in very front of the strap hook there, which cause the buckle cannot get through of the 1st seat loop hole there, the loop hole was too small cannot let a buckle get through.
Hey fella big shout out thank you.
First day taking my little one in the car I really appreciate the upload
That’s great, glad to hear it can assist :)
That's good to see the way the tether goes. But pretty sure that's the rear facing belt path???? And also you should tighten the seatbelt before tightening the anchor strap. Please people go to someone certified in. Installing carseats as this is potentially dangerous
He done it exactly how it should be done
No that’s they way it’s meant to be done. You can’t get seats done by a professional every time you take the seat in and out. It’s easy to get it tight and secure once you know how to do it.
Hi I have 3 children under 5 so need to install 3 seats. Can I run 2 to the one hook?
Yes, can hook two clips on one.
Thanks mate, not aire if this is the best or stupidist design. In one hand its easy in the other ive mever seen this design and now i have to bolt the seat back in 😅
Thanks for the video. Question I have is how do you then access the tyre jack under the seats with the baby capsule in place? Do you have to take the seat out each time?
Hi there, great question. I have only had four flat tyres in about 25 years of driving, so not too worried about getting one. Easy to take out and install the seats when you need too. Have two seats now also with a recent addition.
@@TheCarAdmirer I am considering the np300 but also have to fit two little ones, how is it working for you with the new addition?
I have two kids in my np300 and it's fab, my husband has an xtrail which is ok but carrying a twin buggy and large dog just wasn't working. The np300 has all the space needed we we're very surprised at how comfortable the cab is along with the legroom in the rear.
Nissan absolutely missed the mark on these vehicles when it comes to interior storage options
How do you get the "little toggles" out in the first place? I have the one behind the head rest out but the middle one is buried so deep.
Go them out with a screw driver, they stay up now.
This is a good video for the information it contains; but was it taken on a potato with a light source from the worst possible position?
So hard to see anything in this video.
Took it using a 3210 with my fridge door open in my garage for the light.
What about other Nissan Dual cab utes. Do they all have this toggle? I am looking at a second hand 2013 Nissan D series but don’t want to buy it if I can’t put a baby seat in it for my grandkids
Hi there, I’m not to sure about other models, but if it’s a dual cab I think it would be something similar as it would work if the seats need to fold down.
Life saver. Thank you!
Pleasure!
How do you get the back seat to fold down?
I haven’t tried to see if they do, but don’t think they would. The base opens and has storage underneath for spare tyre tools.
God send 🙏🏽 thank you brother
Thanks for the video mate
Glad I can assist 👍
Big help mate. Cheers.
My pleasure, I was the same hence making the video if I can help others
Muy mala instalación. Hacer lo del vídeo puede causar la
Muerte de un niño. Padres lean el Manual del sistema de retención infantil y la del auto.
Navaras and Hilux's are a pain in the ass for Car Seats.