Versalift Tel 29 how it works and how to work on it a bit

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 10

  • @DonCatherman
    @DonCatherman 8 หลายเดือนก่อน +1

    Thanks for the introduction..I was just asked to repair one a friend picked up..controls not working on boom...I figure he don't know about,control on switch...down loaded owners manual..now I have a really good idea what I'm dealing with...thanks again for posting.... 😎👍👋

  • @danielcondon8
    @danielcondon8 4 ปีที่แล้ว +2

    Thank you for the only real information on a Versalift system. You would think Versalift would have online service, parts, and owners manuals. My system is on a Chevy 30 Van. The batteries often go dead. I'm surprised Versalift went with an electric system powered by 2 x 6V batteries. They should have simply fitted a hydraulic pump to the van's V8 motor.

    • @mikesrandomvideos
      @mikesrandomvideos  4 ปีที่แล้ว

      that would make sense. Mine is generator powered and electric backup on the gas engine and diesel PTO on the other truck.

  • @juancarlosvazquez1085
    @juancarlosvazquez1085 8 หลายเดือนก่อน

    thanks for the video. Have you ever had a problem with hydraulic fluid coming out of the filler cap?

  • @Ttowntreeman
    @Ttowntreeman 5 ปีที่แล้ว +2

    what type hydraulic fluid do you use?

  • @nford3347
    @nford3347 ปีที่แล้ว

    Hi, I have a TEL- 28b Van-28-B Its leaking fluid from the boom, i won't to get it fixed but don't know which Cylinder, mean while where do i put the hydraulic fluid? how much will it hold? until i get a repair person. i watched your video and can see how yours look on a truck, i seen the glass the showes fluid?
    where do it fill it at?

  • @maintenancemorrisonslodge6880
    @maintenancemorrisonslodge6880 5 ปีที่แล้ว

    my tel 29 is a little different than yours.mine wont lift me no more at full extension.any ideas

    • @mikesrandomvideos
      @mikesrandomvideos  4 ปีที่แล้ว

      dirty filters, weak pump, or needs cylinder rebuild.( bypassing in the cylinder.)

    • @markrobinson7703
      @markrobinson7703 4 ปีที่แล้ว

      Nice to see a video on the Versalift 29', I picked one up about 5 years ago, I made a 4" Heavy Duty, channel iron frame, mounted the Versalift to it,using my Excavator, I slide the unit into my 12' Dump body on my F-700, chain front end to truck frame, back end to tailgate latch clamps, Quick connect to dump body circuit ( Body cant dump this way), hook up a 12volt wire and the unit works great, I just use regular Tractor Hydraulic/Transmission oil, in the truck system, (Not using the tank in the Versalift) make sure E brake is on, wheels are chocked, did a test run with about 300 lbs of cement blocks in bucket first maiden run, everything worked as I planned and still does,,, sure beats a Ladder !

  • @duynguyencnc107
    @duynguyencnc107 6 ปีที่แล้ว +1

    Nice sharing video