How to start mains with flying clamps - Badminton Stringing

BadmintonCentral.com
Here is the technique to start mains strings with flying clamps only with minimal tension loss.
Discussion Thread:
www.badmintoncentral.com/forum...
My Stringing Equipment:
Gamma 6004 6pt SC stringing machine: amzn.to/3w0Faaf
WISE 2086 Tension Head
Tsunoda cutter: amzn.to/3KDz1F7
Hakko Serrated Short Nose Plieres: amzn.to/3Jaw8LH
Badminton Stringing Discussion Forum:
www.badmintoncentral.com/forum...

[@BadmintonCentralTV]

the key of this technique is not just the clamping of the string outside the frame, but also how to clamp and tension the rest of the string without the use of fixed clamps.

[@sherlockserra02]

muito obrigado... me ajudou bastante, tinha dificuldades no início... parabéns... like no vídeo... from Brazil

[@sy2see]

Thank you for this.
I have a Pro’s Pro stringing machine like this but it is the crank version and not the electronic version.
This was very helpful.
I have a couple of Babolat starting clamps.
Can I ask, would these be just as good?

[@sy2see]

That is interesting.
A Babolat starting clamp will work just as well, won’t it?

[@AbsoluteXero]

When you take off your flying clamps, how much did the machine change in reaction to the change in tension? For example my dropweight actually drops further as I take off the orange flying clamps. So my two options are: 1. leave the dropweight a little above horizontal then as I take off the clamps it drops to horizontal? or 2. Should I drop the bar to horizontal, take off the clamps, then re-tension the string until horizontal again? Any advice?

[@yxliang2]

so we need three clamps total to string badminton rackets? i only have 2 =(

[@baskarbinu]

From where can I get these flying clamps?

[@DKMondays]

what machine are you using?

[@nileshshah5358]

i made it . it is very tight string

[@gaminghp3057]

I am interest the 1 no of purches machine
Pls give me detail

[@sunnydayz50935]

y the clamps can't move after remove the string from sewing machine..

[@dtrinh1]

Good idea, but the double pull will cause lost of tension.

[@Doggieman1111]

well you just uesd the flying clamps as starting clamps..

[@WasimAkram-su4hi]

wrong way

[@dtrinh1]

Send me an email and I can suggest a method to perform a single pull.