Just stumbled on your channel. These videos are amazing! You give so many tips that other people miss, like which key, looking at the BCM label, what happens when you learn the wrong key, etc. Great stuff man! Thank you so much for sharing.
I have a 2021 Ram Promaster ( Keyed ign ) We made two keys months ago, but an odd remote functionality. 1. Center button ( LOCK ) has NO effect on vehicle, any door 2. Trunk/Hatch Button Unlocks slider and rear swinging door 3. LOCK button Locks ALL doors. When trying the Trunk Hatch to open ALL doors, I get a faint sound from both front doors. There are no "door ajar" indicators. Any ideas ? The BEST KEY SUPPLY remote key has all the correct info ( just a wrong logo of a trunk instead of a pair of doors ) I encountered a mention of in-dash info center options...... but no instruction related to setting options up
@@markmccormickkeys I resolved by using a new 8+12 y adapter, and recovered one of the two keys...remade into a dealer key and programmed in fine. Tried with 2nd key... nogo... prepped a new key and worked fine. So there were two issues in play... the cable and one of the parts.
Good Video....many times guys will keep the flashers on to keep the BCM awake....also, something for those that may have missed it, (because I did at first) you only have to generate a dealer key if you are using an aftermarket key. If your customer gets a key directly from the dealer, (already cut and coded) then you just add and skip the key generation portion 👍👍👍
I got 3 2017s I got to do next week. I went to verify the bcm. they all were Merelli. uhs did not have the Autel listed as able to precode them. thank you for the confirmation. I will Attempt it with the KM100
No, I didn't check. Waiting to hear back from customer. I have purchased two new fobs just in case. In the Autel program, it shows where you can unlock the chip and or re-enable the remote if it becomes locked out. Still learning, and this Promaster has been a bear.
Chrysler/Fiat added a gateway module. Unfortunately, we can't use the OBD for programming anymore. We have to connect to the can network after the gateway. The cables allow us to do this.
Badland Jack thanks for the video..quick question say I order a extra key from Amazon and If I'm not worrying about the lock and unlocking feature do you know if the key is just cut rite with no programming will it be ok and stay running? Thanks
Just stumbled on your channel. These videos are amazing! You give so many tips that other people miss, like which key, looking at the BCM label, what happens when you learn the wrong key, etc. Great stuff man! Thank you so much for sharing.
Thanks for the compliments.
I have a 2021 Ram Promaster ( Keyed ign ) We made two keys months ago, but an odd remote functionality.
1. Center button ( LOCK ) has NO effect on vehicle, any door
2. Trunk/Hatch Button Unlocks slider and rear swinging door
3. LOCK button Locks ALL doors.
When trying the Trunk Hatch to open ALL doors, I get a faint sound from both front doors.
There are no "door ajar" indicators.
Any ideas ? The BEST KEY SUPPLY remote key has all the correct info ( just a wrong logo of a trunk instead of a pair of doors )
I encountered a mention of in-dash info center options...... but no instruction related to setting options up
What key did you buy? Are you working on a full size or city Promaster?
@@markmccormickkeys I resolved by using a new 8+12 y adapter, and recovered one of the two keys...remade into a dealer key and programmed in fine. Tried with 2nd key... nogo... prepped a new key and worked fine. So there were two issues in play... the cable and one of the parts.
Good Video....many times guys will keep the flashers on to keep the BCM awake....also, something for those that may have missed it, (because I did at first) you only have to generate a dealer key if you are using an aftermarket key. If your customer gets a key directly from the dealer, (already cut and coded) then you just add and skip the key generation portion 👍👍👍
Great point. Thanks for the comments. One of my goals here to to create a community that helps each other out. You are now a part of that. Thanks.
I got 3 2017s I got to do next week. I went to verify the bcm. they all were Merelli. uhs did not have the Autel listed as able to precode them. thank you for the confirmation. I will Attempt it with the KM100
I did a 2020 all keys lost today with a KM100 no problem. Good luck.
Good job!
Thanks!
What cable do you have connected to the ODB port and scan tool ? And then what cable connects to the key reader to the glovebox port ?
Check this out.www.bestkeysupply.com/products/autopropad-chrysler-dodge-jeep-2018-bypass-cable-p98xtl
Having issues with fob losing programming. Can you suggest link for information on these bcm and related troubleshooting tips. Thank you!
In my experience, I've never seen a remote lose programming and need to be reprogrammed. Have you confirmed the remote is sending a signal?
No, I didn't check. Waiting to hear back from customer. I have purchased two new fobs just in case. In the Autel program, it shows where you can unlock the chip and or re-enable the remote if it becomes locked out. Still learning, and this Promaster has been a bear.
The black cables at the first of your video what are those for?
Chrysler/Fiat added a gateway module. Unfortunately, we can't use the OBD for programming anymore. We have to connect to the can network after the gateway. The cables allow us to do this.
@@markmccormickkeys thank you im new about this and this information is really helpful for me thank you
Badland Jack thanks for the video..quick question say I order a extra key from Amazon and If I'm not worrying about the lock and unlocking feature do you know if the key is just cut rite with no programming will it be ok and stay running? Thanks
Unfortunately no. Most of the work here is to program the transponder chip in the key. The truck will not start if it's not programmed.
It’s a Fiat here in Australia I’ve used xhorse remote and super chip
Did it require a XN remote? Let me know what you generated it for Skinner. Thanks for watching and thanks for the comment.
@@markmccormickkeys yes xn remote fiat ducato
Good video thanks!!
Thanks, Nick. I appreciate the compliment.
Sip22 key read and cut found here: th-cam.com/video/qkCHdRlssOI/w-d-xo.html