I'm running the meshroom s with a msi gaming trio 4090 and a 240mm aio on a 7800x3d. Temps under long gaming on the gpu have never gone over 78 with gpu fans at 75 and Temps at 82 after 10 min of cini bench on my cpu with fan and pump on auto. Love this case way more than my old dual rad 5900x 4090 o11 d system
What temps do you get under load for the CPU? From my experience the GPU typically stays within a normal range while the CPU potentially over heats. I plan to use a 540hz monitor at 1080p with a 4070 and a ryzen 7800X3D in this case
This video sold me on the Meshroom S. Great great products, keep doing this bro. I do have one question, how does the motherboard tray do with an nvme at the back.
It’s using standard spacing between the motherboard and our tray, so if an nvme usually fits behind a motherboard (no or low profile heat sink) should be fine. Thanks for the kind words!
A 5 to 10mm shim kit that would allow you to add a little more depth to the side panels would be awesome. My GPU sits right up against the mesh and gets turbulence.
SSUPD has an extender bracket with additional IO built in for the Meshroom S and D, I think it could be better with no IO just to add fans and or room for most anything.
If used between a fan and a radiator, I read an article a while back on an old tech website that said 30mm shroud thickness gave the maximum benefit. (1 fan + 1 30mm spacer = similar temps to 2 fan in push pull config with no spacers.
How are the noise levels of the 80,60 and 40mm fans? I have heard that they are not worth it since they barely make a difference and produce a lot of high pitched noise.
I personally run the 60mm Thermalright fans on the rear GPU area of my Meshlicious, and as long as you have some way of controlling their fan speed, you can adjust them to move a good amount of air while staying quiet. They do drop temps in the gpu chamber a good few degrees, and you can really feel the hot air being pumped out.
Cpu is an Intel 12100f, and it’s just using the stock Intel cooler. You might imagine why the stock Intel cooler wouldn’t be compatible with an AMD chip, they use different mounting hardware.
With the motherboard stand off, it won’t affect any aios rubbing on the screen?. Also does it still work with the default area where the pcie cable is? Does the cable need to be longer or does the stand off mod still accommodate for the default one the case comes with it
With the spacer, it does reduce the total available space for CPU coolers. I believe its 53mm max height. I am using the stock riser cable with no issues.
@Ultraprecision Technologies - Do you have anything to support a larger RAD/FAN at the side of the case? I know they make one, but do you have anything that makes what they have better?
@@ultraprecisiontechnologies noctua just released one the NA-FH1. A quick question on the meshroom S, is there anyway to have one or 2.5 drive in there when the gpu is mounted vertically? Im also doing air cooling if that would help. Like if i can get at least one 2.5 in there with the itx mobo, sfx power supply and the vertical gpu i can just use the 2nd m.2 slot on my mobo to replace one of the drives.
That's a bit of a situation isn't it? The Meshroom S actually does support full size ATX motherboard, so with some careful planning, you could have a true SFF pc build with a full-sized ATX board! You can download and check the users manual and read about configuring it for a full-sized board and the limitations here: ssupd.co/products/meshroom-s
Can you use matx board with full size atx power supply in meshroom s? Ang btw, really? Just 700 subs? With this quality of production this channel deserves more
I'm not sure about the atx psu and matx board. My meshroom S is currently with Tryson (who you may have seen in our other videos). He's working on PDF instructions for some of these new products.
Hey which displayport cable extension are you using btw? i am trying to find one since i dont want to spend on getting additional case feets. Also is your gpu is on the lowest configuration?
Yes, my gpu is in its lowest position. I’m just using a short extension, since I like the idea of being able to plug in my display port cable at the pc itself Vs having a whole cable with a 90° end. I’m just using this one I found on Amazon: Poyiccot Right Angle Displayport... www.amazon.ca/dp/B09PFLN8L1?ref=ppx_pop_mob_ap_share
@@ultraprecisiontechnologies Hey thanks for info. Also I see you have the founders card in there and was wondering if you can do a 3d printed duct to exhaust the hot air from the top gpu fan out the top of the case since it is blowing directly onto the back of the motherboard and ssd. Probably would have to put the case in a 4 slot mode to fit such a duct in-between the spine and gpu. I know there are top mount fan mods out there just wondering if its possible without one and just using the gpu's airflow to guide the hot air out the case.
While this is possible for sure, it would be extremely niche. Putting a top mounted fan in with our magnetic fan rail mounts and the motherboard spacer tray would get you 90% there in my opinion!
@@ultraprecisiontechnologies How are your gpu temps btw? Are you using stock gpu profile? Do you use the secondary m.2 ssd on the back of the motherboard? If so, how are the ssd temps?
@@ultraprecisiontechnologies either a bracket coming off the front 280mm radiator so it can rest on the back or from the pci slot areas, i can show you pictures if you like?
A little late discovering this video but that opening tool and the motherboard tray seems to such good products. Unfortunately, I live in the SEA region. Any hopes in the future for a printables file for the tray as well? Would be willing to spend some money even just for a downloadable file to print it myself.
I probably will eventually open up the files at some point in the future for purchase, but for now, selling products like these that I design is one of the main ways I fund this channel. I hope you can understand.
Do you make any mods for the NR200? I was just looking at the motherboard spacer the other day. Now that I know how it works I’ll be ordering it this week.
So i have an intel cpu and it doesn't come with its own cpu fan. I'm interested in your product but want to know how much room do i have after installing the spacer tray for a low profile CPU cooler? or maybe if you're able to list some low profile coolers that can fit would be amazing too. THANKS!
I already ordered one of these and have the same CPU height clearance concern. It's a Corsair iCue Link AIO. The CPU Block height is > 55mm. In 4 Slot GPU mode it sticks out and the panels don't close. In 3 Slot mode it fits with about half an inch of clearance. I know with the tray I'll have about 53mm so my question is (1) is that 3 Slot or 4 Slot mode (2) can I shorten your screws and stand offs to decrease the cable management gap and thereby increase the CPU height clearance?
hey whats the difference between the meshalicious and meshroom s? can i fit an atx mobo in the meshalicious? they sell the meshalicious in white but not the meshroom
The meshlicious came out first, and while us a very capable itx case, it can only fit an itx sized motherboard. The Meshroom s is like a version 2.0 of the meshlicious, and they’ve made accommodations for fitting a full sized atx motherboard (although I can’t say I recommend it) as well as added 3.5” hdd support, and a few other quality of life improvements, as well as slightly improved cooling hardware support.
Hi, my configuration is x670ei mb, 240 aio, msi 3080 tori, seasonic gx1000, can they fit in the Meshroom S, im quite worry about the atx power supply and the big gpu will sandwich the pcie extend cable
I can’t say for sure, but it’s very likely that configuration won’t work due to the pcie extension cable not being long enough. Checkout Gear Seakers video on the Meshroom s, he goes over some complications of fitting larger hardware inside the case.
I'm running the meshroom s with a msi gaming trio 4090 and a 240mm aio on a 7800x3d. Temps under long gaming on the gpu have never gone over 78 with gpu fans at 75 and Temps at 82 after 10 min of cini bench on my cpu with fan and pump on auto.
Love this case way more than my old dual rad 5900x 4090 o11 d system
What temps do you get under load for the CPU? From my experience the GPU typically stays within a normal range while the CPU potentially over heats. I plan to use a 540hz monitor at 1080p with a 4070 and a ryzen 7800X3D in this case
This video sold me on the Meshroom S. Great great products, keep doing this bro. I do have one question, how does the motherboard tray do with an nvme at the back.
It’s using standard spacing between the motherboard and our tray, so if an nvme usually fits behind a motherboard (no or low profile heat sink) should be fine. Thanks for the kind words!
Bro amazing video and amazing products. I just got my meshlicious today.
I recieved the cable management tray, and fan mounts. Cant wait to install them once purchase my cpu and mobo!
Definitely gonna copy these mods, thanks for uploading
Amazing channel..was shocked you only have 700 subs🎉wish you gain many more!
A 5 to 10mm shim kit that would allow you to add a little more depth to the side panels would be awesome. My GPU sits right up against the mesh and gets turbulence.
I’m really looking into a ITX water cool build but need a really good case.
SSUPD has an extender bracket with additional IO built in for the Meshroom S and D, I think it could be better with no IO just to add fans and or room for most anything.
What's the most beneficial size for the shroud?
If used between a fan and a radiator, I read an article a while back on an old tech website that said 30mm shroud thickness gave the maximum benefit. (1 fan + 1 30mm spacer = similar temps to 2 fan in push pull config with no spacers.
Hi can you please confirm if the panels on both of cases are interchangeable? looking for glass panel
well done!!
Great video! I wish you had Meshroom S feet, I would've bought them especially you're in ON!!
Maybe soon!
@@ultraprecisiontechnologies yes please!!!
How is the lian li psu? I keep hearing negative things. Apparently a loud fan, which I guess would be easily fixed
I’ve had no problems with it, but I am absolutely not sensitive to sound in any way lol.
Those are some good ideas! nice!
How are the noise levels of the 80,60 and 40mm fans? I have heard that they are not worth it since they barely make a difference and produce a lot of high pitched noise.
I personally run the 60mm Thermalright fans on the rear GPU area of my Meshlicious, and as long as you have some way of controlling their fan speed, you can adjust them to move a good amount of air while staying quiet. They do drop temps in the gpu chamber a good few degrees, and you can really feel the hot air being pumped out.
Do you guys make the HDMI or display port cover?
Reach out to us on Etsy and we'll see what we can do for you! www.etsy.com/ca/shop/UltraprecisionTech
What CPU and small air fan are you using? Would something like that cool a 5800X?
Cpu is an Intel 12100f, and it’s just using the stock Intel cooler. You might imagine why the stock Intel cooler wouldn’t be compatible with an AMD chip, they use different mounting hardware.
With the motherboard stand off, it won’t affect any aios rubbing on the screen?.
Also does it still work with the default area where the pcie cable is? Does the cable need to be longer or does the stand off mod still accommodate for the default one the case comes with it
With the spacer, it does reduce the total available space for CPU coolers. I believe its 53mm max height. I am using the stock riser cable with no issues.
Nice work 👏
8:10 "You don't get the same benefits" - is there a benchmark that compares the benefits?
Yes. I read an article I found online when I designed these a year or 2 ago. I don't have the link.
Top Extender, Front Extender with ATX Motherboard in mind.
What would you use the extra space for?
@@ultraprecisiontechnologies Adding Radiator?
@Ultraprecision Technologies - Do you have anything to support a larger RAD/FAN at the side of the case? I know they make one, but do you have anything that makes what they have better?
Nothing right now.
What about something to hold a fan controller?
What kind of fan controller? Do you have a model name you’d like me to look at?
@@ultraprecisiontechnologies noctua just released one the NA-FH1. A quick question on the meshroom S, is there anyway to have one or 2.5 drive in there when the gpu is mounted vertically? Im also doing air cooling if that would help. Like if i can get at least one 2.5 in there with the itx mobo, sfx power supply and the vertical gpu i can just use the 2nd m.2 slot on my mobo to replace one of the drives.
If you had a full atx mb what would you chose for a small form factor case?
That's a bit of a situation isn't it? The Meshroom S actually does support full size ATX motherboard, so with some careful planning, you could have a true SFF pc build with a full-sized ATX board! You can download and check the users manual and read about configuring it for a full-sized board and the limitations here: ssupd.co/products/meshroom-s
@@ultraprecisiontechnologies thank you for the help, the only thing I found was the haf Xb Evo and its huge lol
I'm running a z790 ddr5 atx in a meshlicious with asus 3070ti Temps aren't crazy
Can you use matx board with full size atx power supply in meshroom s? Ang btw, really? Just 700 subs? With this quality of production this channel deserves more
I'm not sure about the atx psu and matx board. My meshroom S is currently with Tryson (who you may have seen in our other videos). He's working on PDF instructions for some of these new products.
nice work! going to give this case a go but can you do a hyte revolt 3 ?
Maybe at some point in the future. I’m just a 1 man show for the most part.
Hey which displayport cable extension are you using btw? i am trying to find one since i dont want to spend on getting additional case feets. Also is your gpu is on the lowest configuration?
Yes, my gpu is in its lowest position. I’m just using a short extension, since I like the idea of being able to plug in my display port cable at the pc itself Vs having a whole cable with a 90° end.
I’m just using this one I found on Amazon:
Poyiccot Right Angle Displayport... www.amazon.ca/dp/B09PFLN8L1?ref=ppx_pop_mob_ap_share
@@ultraprecisiontechnologies Hey thanks for info. Also I see you have the founders card in there and was wondering if you can do a 3d printed duct to exhaust the hot air from the top gpu fan out the top of the case since it is blowing directly onto the back of the motherboard and ssd.
Probably would have to put the case in a 4 slot mode to fit such a duct in-between the spine and gpu.
I know there are top mount fan mods out there just wondering if its possible without one and just using the gpu's airflow to guide the hot air out the case.
While this is possible for sure, it would be extremely niche. Putting a top mounted fan in with our magnetic fan rail mounts and the motherboard spacer tray would get you 90% there in my opinion!
@@ultraprecisiontechnologies How are your gpu temps btw? Are you using stock gpu profile? Do you use the secondary m.2 ssd on the back of the motherboard? If so, how are the ssd temps?
Please make an flt 120 or a flt 80 from ek, bracket for the rear section above the gpu, please
Where specifically?
@@ultraprecisiontechnologies either a bracket coming off the front 280mm radiator so it can rest on the back or from the pci slot areas, i can show you pictures if you like?
A little late discovering this video but that opening tool and the motherboard tray seems to such good products. Unfortunately, I live in the SEA region. Any hopes in the future for a printables file for the tray as well? Would be willing to spend some money even just for a downloadable file to print it myself.
I probably will eventually open up the files at some point in the future for purchase, but for now, selling products like these that I design is one of the main ways I fund this channel. I hope you can understand.
Do you make any mods for the NR200? I was just looking at the motherboard spacer the other day. Now that I know how it works I’ll be ordering it this week.
I didn't really no. I didn't spend a lot of time with that case.
So i have an intel cpu and it doesn't come with its own cpu fan. I'm interested in your product but want to know how much room do i have after installing the spacer tray for a low profile CPU cooler? or maybe if you're able to list some low profile coolers that can fit would be amazing too. THANKS!
53mm
@sunfade beat me to it. But yes cpu coolers 53mm or shorter in height will work.
@@ultraprecisiontechnologies do you know when these will be back in stock?
How about the fan radiator shroud? Which one did you use inside your meshroom?
I already ordered one of these and have the same CPU height clearance concern. It's a Corsair iCue Link AIO. The CPU Block height is > 55mm. In 4 Slot GPU mode it sticks out and the panels don't close. In 3 Slot mode it fits with about half an inch of clearance. I know with the tray I'll have about 53mm so my question is (1) is that 3 Slot or 4 Slot mode (2) can I shorten your screws and stand offs to decrease the cable management gap and thereby increase the CPU height clearance?
Yo! Sspud's website shows case extentions, but nobody sells them! Any chance you could help fix that?
What in the world, the case is super easy to open...
hey whats the difference between the meshalicious and meshroom s? can i fit an atx mobo in the meshalicious? they sell the meshalicious in white but not the meshroom
The meshlicious came out first, and while us a very capable itx case, it can only fit an itx sized motherboard.
The Meshroom s is like a version 2.0 of the meshlicious, and they’ve made accommodations for fitting a full sized atx motherboard (although I can’t say I recommend it) as well as added 3.5” hdd support, and a few other quality of life improvements, as well as slightly improved cooling hardware support.
damn good job
8:32 can not agree, noctua fans example push stright with there air and and not to side like other cheap ones, they have best static pressure
Nice video. Do the fan spacing rails fit the new Meshroom D?
I’ll be honest, I have no idea! Lol I havent been hands on with that case yet.
I did this to my meshlicious but with a drimer
Well, you're using the Meshi as an air-cooled case, which it isnt really meant to be. Obviously you have to add parts to make this work out better :)
Hi, my configuration is x670ei mb, 240 aio, msi 3080 tori, seasonic gx1000, can they fit in the Meshroom S, im quite worry about the atx power supply and the big gpu will sandwich the pcie extend cable
I can’t say for sure, but it’s very likely that configuration won’t work due to the pcie extension cable not being long enough. Checkout Gear Seakers video on the Meshroom s, he goes over some complications of fitting larger hardware inside the case.
@@ultraprecisiontechnologies Thank you for your help
You have a 4090 and are rocking a cpu that's able to be cooled by that dinky little thing!?
This was just done for demonstration purposes
holy shit
Is there anyway to make it wider so we can use full atx AND 4 SLOT MODE?