How to Make an Adjustable Silverware Tray | I Like To Make Stuff
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- We made a sliding silverware tray that is adjustable to fit your stuff!
Go to NordVPN.com/il... and use code ILIKETOMAKESTUFF to get 75% off a 3 year plan and an extra month for free. Protect yourself online today!
TOOLS & SUPPLIES WE USED(affiliate links):
kit.co/iliketo...
kit.co/iliketo...
MUSIC: share.epidemics...
Our first task in making an organized silverware tray was to determine what kitchen utensils needed to be store in the drawer. My whole family use forks, spoons, and knives every day and we use larger serving and cooking spoons pretty frequently. Other rarely-used tools can be stored in another drawer. Armed with this line-up, I began to make arrangements to properly store each group of items in two separate trays. My plan is for the more-frequently used items to ride on top of a larger tray underneath.
The construction for this entire project began at the home center where I purchased 1/4" thick poplar boards. This method made be a bit more expensive than buying thicker stock and re-sawing it into thinner pieces, but these were ready to go. I made a simple box frame using the Incra Box Joint Jig and fit the four sides of the upper drawer together. I also cut the sides for the larger bottom drawer, but I added some thin dado slots for the moveable dividers to fit into. The bottom box was fit together using box joints as well.
For the vertical dividers, I cut more strips of the 1/4" poplar. These silverware walls could simply be spaced inside the drawer frames to match the utensil width, but in order for you to grab the forks and spoons comfortably, I needed to add a cutout. I marked out a cove on one of the pieces and tape all of the rest of the dividers to it. Doing this, I could then cut out the same curved shape on all of the pieces at once. I cut out the rough shape on the band saw, and sanded them together on the belt sander.
The walls on the upper tray were glued in place and the walls for the lower tray were fit inside the appropriate dado slots. The bottom shelf didn't actually need a bottom because it would sit directly on the cabinet drawer. To make a simple bottom for the upper tray, I glued on a panel made from the same 1/4" poplar.
I know I'm not the only person who is irritated with the odd organization in their silverware drawer. I hope this project inspired you to go get some simple materials to make a custom solution to a common problem.
Subscribe: bit.ly/ILikeToM...
Check out my TopVideos!: bit.ly/ILikeToM...
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestu...
Want to support ILTMS? Get exclusive content and more...
www.iliketomake...
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
How to Make an Adjustable Silverware Tray | I Like To Make Stuff
• How to Make an Adjusta...
I Like To Make Stuff
/ iliketomakestuff
Huge projects are always fun to watch, but I think these smaller, high-use projects are just as awesome. It's cool to see little things we can build that will get tons of use and make every day just a little bit easier.
I don’t
I really appreciate that you show the times where things don't quite go to plan, and how you fix them. Good to be reminded that you don't have to be perfect first try, and there's (almost) always a way to rescue any situation!
Great job Bob.
I had done a similar project, but used full extension drawer slides on the sides and notched out the rear of the original drawer.. This allows the entire top tray to be the size of the drawer. If you need to access below, you slide the upper tray back into the cabinet, allowing full access to the entire underside of the drawer. When you close the drawer, the rear of the upper tray contacts the rear of the cabinet, moving it back to it's original position, so the next time you open the drawer, the top tray is back in it's original position like a magic trick.
Just a little tip. Jimmy diresta uses a utility blade to score at the height of the finger joint cuts on the back. That prevents the tearout and leaves you with a smaller piece to have to handle in your jig. Seems to work well for me! Keep up the awesome channel man. Love all the projects.
monsignor mustache this tip is on point.
steven reddick Thanks man. It was a life changer
You often mention and use the finger joint jig but I've never seen you explain how it works. Maybe a bits video on different table saw jigs could be useful.
Juho Leiniö a finger joint is good because the glue has more surface to stick to
@@callumbrophy9965That wasn't his question. He wants to know how to build the jig, and how it works.
Great idea for bits video 👍🏻
i would like that too, maybe one jig for the router too. Here in Europe the dado doesn't too easy to find.
Nice idea
(tuon torin)
I really enjoy these practical projects. A big part of why I'm so interested in making things is that you can get something that improves your life, without having to go through endless product listings or custom-order something. It's something humans evolved to do that we've become increasingly disconnected from. Connecting to that, even if only vicariously, is deeply satisfying.
Also, I know I say this a lot, but the extra effort you put into your music is definitely worth it.
More videos like this please. Super practical. I want to go to this to all my drawers now for organization.
Hi there, Bob. I love your videos. They have something, don't know what it is, that calms me down. Whenever I'm stressed out or furious, I watch them to relax. This is one of them. Plus, I love when you show bloopers at the end!
I like your videos better than some other makers simply because you show your mistakes, such as forgetting to put the curve in the dividers, and what you do to fix them. It definitely helps me to think more about things like order or operations. Keep up the great videos.
This strikes me as the sort of project that lots of people would enjoy doing: more than would be likely to have all the equipment you showed. Something to consider next time for this type of project is the use of much simpler tools and techniques. As an example, the best I'd be able to bring to finger jointing is a jigsaw and some wood chisels.
Great video, wish you had published it yesterday. Last night I made a sliding draw system with dividers for a drawer under my new work bench. I think I reinvented the wheel. I will definitely use your process for my kitchen drawers that I am going to build. Thanks Bob
CLAMP CHAMP!!
Michael Caruth I have to do timelines in my woodworking class and whenever we use the clamps I always write ‘clamp champ’ on it
I made something like this! But I used a plastic cutlery tray from ikea for the top part that has almost exactly the same width as my drawer. Then I designed and 3D printed some parts to hold the tray and to be able to slide it back and forth in the drawer :)
i'm impressed how much consistent content you deliver - an you don't get arrogant like other youtubers with those big subscriber counts
you kept beeing a maker and a nerd - keep it up an thanks for you great content
I loved this episode. Please add more of these. Great ideas for people with small spaces.
I love how helpful your videos are to people who don't know a lot about woodworking. You include tips throughout the whole video, and your narration during the video is top tier. Makes me think of how The King of Random used to make videos. I prefer that format. This is totally something I could see myself doing for a kitchen I own one day.
On the Incra Box Joint Jig, you can slide the MDF backer to the side by using those screws or flip the whole piece around to get a fresh face to cut through. It can move around to give you a fresh backer board each time you use it. FIRST!
1 week ago?
Did you time travel?????
Awesome project Bob! I watch your show with my son and he loves it at 7 years old and it makes him want to try your projects you do in here!
Hello Bob, I have found that welders chalk/soapstone works really well lubricating wood on wood slides. I think it works better than paste wax as it does not attract dust and feels more slippery than paste wax. Thank you for posting this and all the videos you produce.
love the rhythm editing on 12:42 . the little things that make your video better. good job, thanks!
I don't know why I haven't watched your videos before, but after seeing your interview on Evan and Katelyn's podcast, I thought, "That guy seems knowledgeable and disciplined. He probably makes good videos." I like how you explain things simply and clearly, you explain why you did things, and you suggest alternate methods for people with limited tools. Subscribed!
I have been watching your videos for a month now and you are a very talent person. I'm miles away from doing everything you do, but I'm learning a lot. Thanks for sharing your knowledge and techniques. One day I will get there ;)
Been in the house for 5 years, been meaning to make something like this for a while. Feeling a bit more motivated now. Thanks, guys.
That you for sharing this. This version is the most doable I have watched in the last year. I have 3 drawers I really needed to try this on and now I have a great method to reference. Thank you!
Thanks so much for the detailed explanation. We'll be needing a tray like this, and watching it done builds our confidence. If not competitive drive. Haha.
As complete novices a couple years ago, we've come to really enjoy woodworking. The savings verses buying finished products is a great bonus. And the quality we prefer is coming along with practice. We definitely subscribed.
If your trying to get dry glue off of a boat d one of the best ways to do it is to take hot water and a soft bristled brunch and rub it off it doesn’t ruin the wood or anything but it’s a great method you should try it Bob
I love the ad during build-up. Perfect use of the time!
Thank you again Bob, I learn so much from your videos. I remember the time when I never touched any of my fathers tools and now I'm watching videos like this and make my own stuff. It's fantastic to learn by doing, but when you have no idea where to start it's pretty hard to create something nice. With these videos, you see how other people do it and you can adjust a few things for your own projects.
I started watching your videos after some research on a home spray booth. Then I saw you had more interesting videos and I think I've seen all of them right now haha. Keep up the good work.
Thanks so much!!
Going to be totally honest. I’m just a 16 year old kid who doesn’t build stuff, but watching these videos are so satisfying and I can’t stop. Thanks for the content Bob! Keep it up!
Been meaning to have the same made for our silverware drawer. I had a plan in mind but I wanted to hear Bob's challenges, tips, and tricks first.
Great video, Bob. I always look forward to your videos.
Thanks Bob, today I learnt how to make a present for my mrs for mothers day! She can have the top part for her birthday 🤣🤣🤣
Nice video - I like the detailed explanations on things and the insights into why you do things the way you do (like explaining the way you’re leaving the glue so it’s easier to pop off)
That being said - my kids and I love to watch all your videos, thanks Bob (and Josh)
The one you can buy at Menards that is over sized and you cut down would work but the sides and top/bottom you cutt off sit at the top of the tray and wastes any space beyond it. I love this idea.
Interesting and informative. As you mentioned this is not structural and the box end joints are over kill.
I'm learning a lot about some basics and less basics of woodworking and building and stuff, so thanks!
Personally, I would like to see more of your fam jam in the videos if possible! :))
Thanks for the videos! One of my favourite channels
Awesome looking drawer, just thought, maybe you could mount a block inside the cabinet at the distance from the front of the drawer that is the length of the silverware tray, that way every time you close the drawer it will slide the silverware tray, which is probably most used, back to the front of the drawer. Keep up the awesome work!
Really appreciate that you didn’t stop the video for the VPN commercial. That was good to put it up to side.
This project is again something that will inspire many people here! the result is awsome, its a low cost project and easy to build! Great job man!
why all your equipment & tools are so easy to use and seems practical enough plus they all line up nicely. i'm so envy seeing all this!
I subscribed to this channel to learn how to decorate and boy is it cool to see and know what I like. I like learning about projects that might take a few days and learning more about wood glue.
Hey Bob -- on the Incra iBox jig -- the MDF backer can be flipped around and shifted left or right to get fresh zero clearance back support to help minimize the blowout. The 2 screws are into nuts in a channel to allow movement.
Ah, good call! Thanks!
I swear I learn something new every time I watch one of your videos Bob. Great tips on the finger boints
That's awesome to hear, thanks!!
I am 16 years old and I never actually made anything from wood, apart from some school projects. Still I love watching you make awesome stuff and I hope to do projects like this some day when I have the money and space to do it.
I live in an apartment and don't have most of the power tools you used. However I think I could make something like this with just hand tools (and patience). Thanks for the inspiration!
I’m taking a Wood Technology GCSE and all your videos help me and encouraged me to take that subject and to do more adventurous things like finger joints in my work! Thanks Bob! 👍🏻
I learned a lot. Just starting to do a little wood working. Learning that tools have a name and not everything is called a do-dad or thingies ;) Husband is helping me build up my my own tools and box. So this is pretty dang cool ! I love the way you have done the tutorials. Easy to understand and learn. Tanx Man !
I really like this. I've been looking for an idea for my really small shop. So small I have to go outside to change my mind. I'm thinking of using this for drill bits and driver heads. Thank you.
For the glue squeeze outs in tight areas, I like to use a straw with a 45 degree cut at the end and scoop out the glue like a shovel. I think I’m going to make some dividers tomorrow. Thanks for the idea of double drawers
Thanks for another great idea to save space in our kitchen
Terrific build! The only thing I can add to this is swapping out the drawer slides for full extension slides. Then again, I recommend full extension slides for all drawers and rollouts. It makes them infinitely more usable. You could possibly also use this sliding tray design to turn another drawer into a spice drawer.
I always learn stuff from you Bob. Thanks
We're renovating our kitchen this Summer and I'm definitely doing this for our drawers!
Exactly what I needed to see. Well-paced and full of useful detail. Thank you.
Been wanting to make one . I really hate the plastic ones. Everything seems to cling to it and I'm forever cleaning it do to my ocd lol.Wood wood be a better alternative and to make it to fit and the way I need it is a bonus. Thanks for sharing Bob
I've been watching your channel for a few years, and I love this new format. Thanks for going into extra detail.
Great project bob, our favorite part was when you had to take apart the dividers to cut in the recesses for reaching the silverware. We appreciate you leaving that in, since we've had to stop mid-project so many times to add/modify something we forgot. Thanks!
Projects that can make a difference every day in your life are essential! Its the little things, such as a nice shower head or sliding trays in the kitchen drawers that make your house unique.
Can u make a video about how to make that kind of jig/other jigs in general
Great design with the double stack. I have built a similar drawer organizer and after time with closing the drawer the knives and forks slide forward into the top part of the divider and eat away the wood. I installed small pieces if Formica on this surface to prevent this from happening. I used samples of Formica form the home improvement store.
This project is very simple and pretty cool. Thanks for the tips on finger joints. I'll keep watching if you keep Making.
I learned to make sure that you are really and truly ready to glue in the dividers!
This one couldn’t have come at a better time - I have a very similar project coming up and needed ideas on modular trays with 1/4 inch material. Thanks, Bob!!!
What a simple idea, I plan to make use of this as my draws are full of kitchen junk, thanks for the video, nicely done..
I pretty much saved all your videos to my new folder, "House To-do" because a lot of these are going to be needed in the new house that we just bought lol! Thanks, Man! These will be great help!!
Hmm. Things I learned from this video...
- Measure twice, glue once.
- Dry fit pieces before you do final assembly (those dado's are scary thin!)
- Check the plans/ design.
Just kidding. Those little things made it very human and natural! Not cutting out all the little imperfections. Love the idea and how it turned out. Surely going to make this for my own pile of stuff drawers and get some organizing going in them. Keep up the nice work and thank you for sharing!
Great video. It's cool you leave the flubs in as well👍
The finger joints were a good idea. Thanks
I'm so glad you said something about the depth of those dados. My first thought was, "Eek... that's a bit extreme." Pretty sure I'm going to do this for our kitchen drawer now, too. We have the same problem you solved.
I work at a DIY store I'm Portugal called AKI, and a learned so much about tools and stuff watching your videos. Keep it up brotha 👌
Thats one tasty idea, making a two floored tray... I definitely have to try that one out. Thanks for the thought!
I love the idea how to utilize internal drawer volume. Awesome!
I've watched this video three times and I think I'm ready to make mine. It's been a long time coming, but I had to get some materials and tools first :) - thanks for sharing!
That's slick. Hey your old silverware tray looks like ours. I better get to work. Thanks for sharing. The simple things make the difference. Nice.
This is one of the first things I made for our new place. Made it for ALL the drawers, drives me crazy to have all that stuff is disarray.
Great and utility work. I need to try this because is use every day and add a nice touch to the kitchen drawers. And other rooms of the house. Thanks. 👍🏼🙏🏻
Cool tray! you can use that for a kitchen, bath or in your shop. Time to get building...
You can use UHMW tape on the bottom of the sliding bit. It's very low friction but high wear resistance meaning it's great for those type of situations. You also don't have to worry about bits falling off like paste wax.
Loving the home improvement style videos Bob! You’ve inspired me to start my own channel! Love from Australia! 🇦🇺
I’ve been apprehensive about panel glue ups with such thin material. Seeing you do it with cheap harbor freight aluminum clamps made me more confident doing it. Thanks for the video
I’m glad you did this video. I was missing some of your videos that we could build simple stuff for daily bases. Good job.
This is a worthwhile project!
Nicely done. My experience was awful with this upgrade. I bought one of these, pre-installed, with my kitchen cabinets. I hated it so much that I took the top tray out b/c the silverware was constantly snagging on the cabinet face as it went back into the cabinet. Silverware never lays the way you want so it would often get stacked too high and wind up getting stuck as the drawer went in and out.
Use a plastic straw cut at a 45-degree angle. Use it to scrape up the wet glue in the corners. Credit goes to Next Level Carpentry. It works amazingly for cleaning the glue run ou in corners. Glue travels up the straw. If it gets full just cut the straw again.
As always, another AWESOME video. Sometimes I go back and rewatch your earlier ones.
This is a project that every person can for sure need! Thank you for sharing how you made yours :)
I’ve been contemplating something like this for our kitchen for some time. Many thanks for this!
Ive never seen finger joins done before ive heard of them and i love your projects so good work and good luck
I'm definitely going to try those finger joints. Never worked with wood that thin. Looking to try it out. Stay safe my friend.
Pretty slick drawer organizer. I really like the two level design.
Great job Bob! I love how you explain your thought process on everything, and I found the part where you explain, how leaving the glue in a blob is easier to pop off very useful. Keep up the great work!
I see that sawstop trophy blade/brake on the wall! glad you have all your fingers!
When is it🤔
@@blaugrana-jw3dd 4:20
another great video, definitely would be nice to see how the finger joint jig works. my favorites are the home improvement and prop making videos! keep up the good work!
I always learn new stuff when watching your videos
شكرا على كل المجهودات الجبارة التي تقوم بها
Nice Job! Now my wife has encouraged me to make something similar. Thanks Bob
You have not idea how much i need this. My drawer it's a freaking garbage and need to be organized. Awesome video. I will made it but need to figure out how since i do not have that much equipment.
You should glue a small pin inside the cavity for the draw that contacts on the sliding bit so it slides back to the front when you close it. Otherwise you may end up fishing back in there trying to find it every time!
Very cool 👍. I'm glad this popped up... I welcome projects that keep me in the shop right now, and "that" drawer is a serious issue at the moment!!! 😲😲😬😆😆
Love this! I love to cook & have never found drawer dividers that work right & hold all my small cooking tools.
I have that same Incra finger joint jig, it actually has a built in backer board that you can move around, and they also sell replacement backers (they’re easy to make as well)