Flash Firmware All devices Android Tv Box Fix Works\\
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Download software and firmware ,plug box to usb to pc,install program,after install,unplug box,right click program icon that is on desktop,open file location ,make folder ,license,place files into made folder.right click on program icon run as Administrator,click file,locate made folder,double click firmware,now press start,,,now press the reset button located inside the a/v port use non metal item,such as a toothpick,with the reset button pressed plug the usb wire from pc to the android box,,,wait for it to complete,,press stop quickfileshare... program ,disconnect box,,you are done,,,,,,,,,,,,,,,,,,,,,link1usb tool ,2,firmware,,chinagadgetsrev...
look for updated links in pinned comment
updated
download software to install to get driver for box
www.mediafire.c...
download firmware
chinagadgetsrev...
download latest software for use
quickfileshare...
now instead of making the license folder ,the latest software includes folder with all keys
put your firmware img into the license folder that is in latest software folder
now after you have installed the software from first link,so that driver is properly installed from box
proceed to run the latest software.for a successful FLASH.
updated link 4-25-22
Here is a link to the exact file I used with Key
use chrome browser to get file
drive.google.c...
and if you have Rockchip device
Updated Rockchip links
rockchip this you need to fix your device
Rockchip device links below here you go This is for Rockchip devices
chinagadgetsre...
1 install driver ,you will need this tool here www.mediafire.c... ,,,.. 2 you will need this program here www.mediafire..... Batch tool here, . read and follow directions on link 1 link 2 driver link 3 is tool
updated link 9/22/19
androidpctv.co...
Daniel Jurcich on Facebook www.facebook.c...
link2chinagadgetsreviews.com/firmwares/
Mr Wizard jr Heyou of
updated link 4-25-22
Here is a link to the exact file I used with Key
use chrome browser to get file
drive.google.com/file/d/1d4OivB0mWE40Vau-HxdPpOYoMfo_Drj_/view?usp=sharing
Well done video, hope to try this not being good at this stuff. need to update from 4.2.2 to 6.0 on a mk902 android box!
I would not update any higher than 5.1,,,the way they do these operating systems is the higher you go up in version the more it will be working for someone else rather than you the owner,as in background services,and also I would only flash firmware if not working,and update from within Os
Mr Wizard jr Heyou
Hello, can you flash Roms to Android TV boxes with this method?
@@DanielJurcichHeyou did you get what I send you please help me that's all I'm asking you which one I do thankyou
@@rolandcantu68 ok here is what I found on the information that you gave me,I found nothing,I suggest going back to or contacting the seller ,and let them know what the issues you are having,because I found no information on your box.
Followed your instructions and worked perfect. revived a dead blue screen MXQ box
Awesome ,im glad you got it,,now if you would please take all files used to do that and place them on a disc label rescue box ,,just in case you need them again
Mr. wizard thank you for the help
are you having problem with it?
@@DanielJurcichHeyouHello, can you flash Roms to Android TV boxes with this method?
@@pwhales264 Well that depends,,if it is made for your box,then yes,if it is a random android rom then no,,,within the rom/firmware specific device drivers are found,,unlike with windows operating system...so if you have a custom rom that is made for your box,and your box has amlogc cpu yes
@@DanielJurcichHeyou , Yes the Rom that I am planning on Flashing is made for my Box, I just don't have the experience of flashing Roms .... the box is the *Mecool M8S Pro LB* and the Rom is >>>> [ROM] Mecool M8S Pro LB TVStock Nexus ROM (Android TV 7.1) By Magendanz on Freaktab.
@@pwhales264 should work fine,though it would need to be a single img file for this method,,,so if you have that it is a go
Saved my box that otherwise would not boot up at all, or even be recognized by the TV. Thanks!
You are welcome Sir
link1www.entertainmentbox.com/how-to-use-the-amlogic-usb-burning-tool/
Thanks Bud..
Your Very Welcome,Happy to Help
Daniel Jurcich can i find Android 7 on the site and install it on my box that has Android 4 like you let os see ???
When I try to download the program it doesn't have the other item you said we need to have when creating a new folder. It just has the readme file and the setup file
Same here
thank you so much for a very detailed explanation of the tool... I have the r-box pro 3G and there has been 5 updates for it but every time i thing about doing it my head spins till I saw this explanation.... now to get a male male cable on amazon.
yes amazon ,I bought mine at a store called deals,,a dollar store,,,,,I would start with the version of android that came stock for flashing,and update from within the os ,system settings about box,at the top update,,,,,and you are welcome I hope it helps let me know if more help is needed
Firmwares - China Gadgets Reviews
chinagadgetsreviews.com/firmwares
Well that was the clearest guide i've watched .. I like the pace, I didn't have to pause & review!!! .. Thanks.. you are a master!
Thank you very much and your welcome.
Thanks for letting us know.
NUFF RESPEC 💥👏🏾
Bro im happy to help,if you have any questions feel free to ask,Thanks for the comment
Wow thanks a lot. I was also looking at OTG but it is not working on any device but I shall look definitely. Thanks again for your help. And btw, happy holidays
Thanks and right on your welcome,Happy Holiday to you also.
2021 and this still works and helps thanks man
Right on Bro ,Your welcome
Thanks for the speedy reply I have the MXQ Pro 4K Android version 6.0.1 .
Even today your re still the Guru of this !!!
Thank you very much Bro.
I am facing issue.in my MXQ Pro 1GB/8GB Only the blue light on front and stuck on android boot logo Please help me Deniel Jurcich Do I need to try short pin method? and please share software tools link
Thank you for the video. I found it very helpful. Got my new android box without Kodi installed. Tried to install Kodi with no success. I'll try your method as a last resort.
Daniel, When you first connect the device to using the USB cable, prior to setting up the burning tool, do you need to hold in the reset button?
no not at that time,,at that time you have the box connected,so that when you install usb burning tool,the driver fr the box will be installed with software,if box is not connected during software installation ,driver will not be installed
Amlogic usb burning tool new link
www.mediafire.com/file/mouaicxol770hkl/Amlogic_USB_Burning_Tool_v3.1.0.zip/file
UPDATED
download software to install to get driver for box
www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar
download firmware
chinagadgetsreviews.com/firmwares
download latest software for use
quickfileshare.org/LI/NEW_USB_Burning_Tool.zip
now instead of making the license folder ,the latest software includes folder with all keys
put your firmware img into the license folder that is in latest software folder
now after you have installed the software from first link,so that driver is properly installed from box
proceed to run the latest software.for a successful FLASH.
and if you have Rockchip device links below here you go
This is for Rockchip devices 1 install driver ,you will need this tool here
chinagadgetsreviews.com/download-rockchip-driver-assistant-v4-4.html
2 you will need this program here
chinagadgetsreviews.com/hot-download-rockchip-batch-tool-v1-8.html
Batch tool here,
www.mediafire.com/file/768dc79pd2jb85j/RKBatchTool-v1.8.rar
read and follow directions on link 1 and 2 link 3 is tool
if all you can find is a zip file here is what to do,the zip file that you have is a firmware prepared for a different
method,you can keep looking for an img version of your firmware if there is one ,may not be one available yet,or you
can use what you have ,using alternate method,ile help with both if I
can,
now for the file that you have ,you should be able to un zip file and
inside should be a file named u boot bin ,among others,first you want
this program bootcardmaker ,that is the program that is needed for the
file you have now,here
www.mediafire.com/file/mf3s43g5tg2vn9n/Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1.0.1.rar
you need a micro sd card,put card into pc run application,first choose
disk a,b,c,d, whichever one is your memory card, check partition and
format choose your bin file click open and find the folder that you un
zipped click u boot bin,now click make,click ok and on next click start
ok ,ok ,close,ok,,now close program,go to memory card open now take all
the files inside un zipped folder and drag and drop into memory
card,,,when done ,remove memory card safely ,now put card into android
box,with a small pin or toothpick inside the av port you will find a
reset button,you want to have box all connected and off now press and
hold reset button while pressing power button hold at least ten seconds
you should see on the screen android on its side ,and you should now be
in recovery mode,,,hope that helps
hey bro if you can find a couple of usb cables,cut ends so that you have two male connectors ,separate wires and match each color together ,black black white white blue blue green green and should be a bare wire match that with bare wire,,I bought my cable at the dollar store but have made a few when I could not locate it ,do not give up
www.entertainmentbox.com/?s=mxq
www.entertainmentbox.com/android-firmware-downloads/
I will say this by design these android box's are designed to burn up fast by never turning off,unplug when done
www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar
quickfileshare.org/LI/NEW_USB_Burning_Tool.zip,close
chinagadgetsreviews.com/firmwares
should we plug the adapter at the time of connecting it with PC while connecting the box with PC??
i have t95z max that is dark and refuses to restore using the reset button via the a\v input. when i open the rockchip batch tool, the box is not recognized. do i need to short the nand chip? and if so...which pins?
Ini Tutorial yang sangat membantu. Terima Kasih 👍👍
Tepat di Bro saya senang saya bisa Membantu.
@daniel hey man, thank you for the detailed video, you made things easier
you said in your video the mac_ether file(that comes with Usb burning tool) is very important..
the thing is that i don't have it, and i tried downloading the burning tool from different sources, even using the link you have in description..
appreciate your answer man
Which box do you have and which version of android came stock?
Daniel Jurcich i have the MXQ pro 4k.. i dont know which software on it, cause when i turn it on, its the android logo then green screen, even if i try to wipe from its settings it goes to green screen
Here is a link to the exact file I used with Key
use chrome browser to get file
drive.google.com/file/d/1d4OivB0mWE40Vau-HxdPpOYoMfo_Drj_/view?usp=sharing
silly question..... should the power be plugged into the box? Just can't get anywhere on this and trying to eliminate things i might be doing wrong.
Hi Daniel. I donwloaded the righit image for my tv box (S10 amlogic 912) but it doesn't have the mac_ether file like yours
check in top pinned comments sir you should find what you need,let me know if you have any more questions
Man you made it look easy as hell and i wasn't even close, couldn't make it connect or find the driver.
Hey no worry bro just a bump in the road,which box do you have,and which android version came stock,,where there is a will there is a way,and we will find the way,if you got the will,,,,85% of the time these can be fixed very easy,though sometimes a different approach is needed,and I have been on android since before it was even released,so I have learned a couple of things,hopefully will help ya out
Daniel Jurcich I have the MXQ pro 4K 6.0
Is there any other way to we could communicate other then on here? You can add me as a friend on FB if you like. John Yahya Hammoud
ok try this first if you will and if you did exactly already let me know
now you want to make sure the usb port on pc is at least 2.0 min,
download software to install to get driver for box www.mediafire.com/file/0s5q2nf... download firmware chinagadgetsreviews.com/firmwares download latest software for use www.entertainmentbox.com/how-... now instead of making the license folder ,the latest software includes folder with all keys put your firmware img into the license folder that is in latest software folder now after you have installed the software from first link,so that driver is properly installed from box proceed to run the latest software.for a successful FLASH.
Daniel Jurcich yes it is
I downloaded the usb burning tool i found the frimware where i can found the folder with the mac_ether file isnt on the program ,pls help i stuck on net to found and i didnt also usb tool my tv box is not showing any info that is founded how can u help me?
download software to install to get driver for box
www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar
download firmware
chinagadgetsreviews.com/firmwares
download latest software for use
quickfileshare.org/LI/NEW_USB_Burning_Tool.zip
now instead of making the license folder ,the latest software includes folder with all keys
put your firmware img into the license folder that is in latest software folder
now after you have installed the software from first link,so that driver is properly installed from box
proceed to run the latest software.for a successful FLASH.
thanks it works for me only that even if I load the firmware the remote control does not grab me but oh I had another box more current and with the new control I have to use the 2 boxes hahahaha
but thanks you got me out of trouble
hi i need your help , i try to upgrade framware into my mxq 4k box but that box now not working, there got error like ''test drive failed or adb failure. now both light is on but very dim and i cant do anything in this box.
im not getting it the downloads dont work i am on 6.0.1 but Wi-Fi is broke I've tried flashing it 100s of times and none of the 30 tutorials really work
Need help. I have to buy h6 alwaner android 10 tv box 20 day used now open come logo and android standby
Not run tv box.
So you have to have a male to male usb to get this to work? is there a way to put it on a flash thumb drive and exicute the new firmware?
Which version of android came stock,
could you offer some advice, I have a MX aml 8726 v1.1 and tried to put an updated firmware on it, that didn't work at all and now it's bricked with no display. I have found the Matricom firmware that worked before but it's not in .IMG format and USB burning tool doesn't recognise the firmware. the toothpick method isn't working either.
if all you can find is a zip file here is what to do,the zip file that you have is a firmware prepared for a different
method,you can keep looking for an img version of your firmware if there is one ,may not be one available yet,or you
can use what you have ,using alternate method,ile help with both if I
can,
now for the file that you have ,you should be able to un zip file and
inside should be a file named u boot bin ,among others,first you want
this program bootcardmaker ,that is the program that is needed for the
file you have now,here
www.mediafire.com/file/mf3s43g5tg2vn9n/Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1.0.1.rar
you need a micro sd card,put card into pc run application,first choose
disk a,b,c,d, whichever one is your memory card, check partition and
format choose your bin file click open and find the folder that you un
zipped click u boot bin,now click make,click ok and on next click start
ok ,ok ,close,ok,,now close program,go to memory card open now take all
the files inside un zipped folder and drag and drop into memory
card,,,when done ,remove memory card safely ,now put card into android
box,with a small pin or toothpick inside the av port you will find a
reset button,you want to have box all connected and off now press and
hold reset button while pressing power button hold at least ten seconds
you should see on the screen android on its side ,and you should now be
in recovery mode,,,hope that helps
The reason I ask is that I have plugged it into 3 different USB ports on my laptop without pressing the reset and without the supply lead in the android box and not heard the recognition tune. Do I in fact need the supply lead? i suspect that my laptop does not have a USB2 port. Is this important and is there a way around this without having to buy another laptop? Sorry for all the questions.
did you follow instructions exactly try this download software to install to get driver for box www.mediafire.com/file/0s5q2nf... download firmware chinagadgetsreviews.com/firmwares download latest software for use quickfileshare.org/LI/NEW_USB... now instead of making the license folder ,the latest software includes folder with all keys put your firmware img into the license folder that is in latest software folder now after you have installed the software from first link,so that driver is properly installed from box proceed to run the latest software.for a successful FLASH. here are same links if above does not work www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar quickfileshare.org/LI/NEW_USB_Burning_Tool.zip,close chinagadgetsreviews.com/firmwares,,,, sounds like driver for box is not installed follow steps above and get back to me
If after you Flash ,and wifi does not work,even though you have right firmware,go into system settings on box and do a factory reset from settings,and wifi should now work ,,also check time and date in settings,if still not working ,wrong firmware,you are getting closer keep trying and you will find the right firmware,and you got it
In a bit of a pickle with my MXQ 4k . Got it a week ago and heard something rattling around inside. The reset button isn't attached. i think nothing of it as box was working fine. One week later i need to flash the box as it freezes right after restarting into the main menu. But can not flash if i cant access the menu after reset. any ideas?
Ok try this if you would,,unplug box for an hour,,and plug box in go to system settings in box and go to backup restore,and restore deleting all apps and info,,and let me know ,,if it can we will get it.
in that write up it didn't say anything about combining the firmware with the mac_ether.ini file together in the same license folder. It only said to place the ini file included into the license folder if you had issues flashing the box.
perhaps in the write up,which is why there is a video,the write up is only to cover anything I may have missed in the video,in which what you speak of is in the video,and also it does say place Files into folder ,it does not say place file into folder,you are totally wrong in what you say,read it again
new link AMLogic USB Burning Tool v2.1.7.0
androidpctv.com/amlogic-usb-burning-tool-v2170/
I did watch the video few times and followed step by step. I don’t know why but when I unzipped the USB burning tool the setup folder and mac_ether as you show in the video is not there. In addition when I connect the box to computer nothing happens. It should recognize right?
Follow the steps,after you proceed with what I said in previous message,, here it is
1 download software to install to get driver for box www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar
2 download latest software for use quickfileshare.org/LI/NEW_USB_Burning_Tool.zip now instead of making the license folder ,the latest software includes folder with all keys put your firmware img into the license folder that is in latest software folder now after you have installed the software from first link,so that driver is properly installed from box,,,
when you install the software from first link the box has to be plugged into dual male usb cable,,only cable plugged into the box is usb cable.,,,after you have installed the software from first link and the driver is installed,,go to the software from second link ,place your firmware image into the license folder and then run the application not the link from what you installed but the one that has the license folder with your image in it,,,like in video and you are good.
I have a Cubetek 4k android box. Once during the hard reset, the power
cut was interrupted due to which it was not fully reset. Then when the
power is turned on, only the Android box logo is visible.
There is no process even after turning on the power by pressing the hidden button.
kindly help me.
How long ago did you buy that box,,and which version of android came stock?
How to conect my laptop and tv box do i need 1st to download the program than with thr usb to slove the problem,my box is showing bios like in the pcs is down,how to instal the sowtwer pls help?
You need a dual male usb cable to connect android box to pc.
Hey man my tv box get stuck on boot loop i factory reset but still get stuck there again can you help me
what is the mac-ether files that u drag into licence folder? when i download the amlogic USB Burning tool i cant find it.
Use the latest software link choose slow download
androidpctv.com/amlogic-usb-burning-tool-v2170/
,,,with latest software you can skip that step.try latest software if you have any issues let me know
What if you get a firmware downloaded from china gadgets that doesn't contain just the .img file, but all the SD card files?
They have a few different format types when it comes to Android images/firmware,different types for different methods,,which box do you have and which version of android came stock,,now you should know that you cannot update your firmware on your box,the most you can do is return your box back to stock.
Iam from kerala, India
And my android box is mxqpro and the version is noughat. Recovery mode is not working when I try to hard reset. And also while flashing throug your method the android box cannot be connected to the usb burning tool. Only a sound and slught blue colour. Is it slight blue colour while connecting computer through usb cable by pressing secret button in the av port. Please reply sir🙏🙏
Now is that the version that came stock?
Unable to pair the box with my pc. No notification that saying it is connecting to my pc. Need help.
Hi daniel i got the same box and when i connect it via ethernet cable it works then the connection goes away i unplug the cable ou and back in and it works again ive tried 2 different cables both do the same does the box need to be flashed ??
You can try this 1 check that the date and time are set correctly on your box,,,if that is ok,you can try plugging in cable and then reset your router with the box plugged in and on.
I cannot start my tv box as it is Stuck at boot logo & I suspect the sd card or operating system is corrupted & need to be formatted or updated to a newer firmware 😩😩😩
All you can do is flash original firmware,if you try to use firmware other than original,it will not work at all.
All Rockchip firmware can be found here
www.entertainmentbox.com/android-firmware-downloads/
and if you have Rockchip device links below here you go This is for Rockchip devices 1 install driver ,you will need this tool here chinagadgetsreviews.com/download-rockchip-driver-assistant-v4-4.html 2 you will need this program here chinagadgetsreviews.com/hot-download-rockchip-batch-tool-v1-8.html Batch tool here, www.mediafire.com/file/768dc79pd2jb85j/RKBatchTool-v1.8.rar read and follow directions on link 1 and 2 link 3 is tool
I have a 2 MXQ Pro 4K S95W V2.0 1 takes the flash, and it shows the logo and then the tv says No Signal nothing happens after that and if I take power cable off and put it again it don't show the logo again even the blue light is on and I can turn off and on the box using the remote. the other one has a red light and when flashing it gives the 7% error. I do not know what factory software they had. I being trying for months on and off fallowing different tutorials but no luck yet. Please can you help me find a stock software that the boxes had? thanks
Here is the thing about what you are trying to do,flashing firmware is mainly for restoring stock firmware,,if one is to try and update newer firmware they will find that the box becomes unusable,and the reason for that is that the newer firmware is made for newer hardware,which an older android box would not contain,which is why they fail....I will try and help you recover your android box,,1 do you know which version of Android came stock on it? 2 How long have you owned the box? 3 when did it first mess up ?
@@DanielJurcichHeyou no I don't know the stock version, I had the box maybe 2 years ago and it started messing up about 8 months ago. a have not being able to find the correct firmware anywhere
this did not work at all for me the first download was a zip folder that did not let me install the program i'm not sure my computer is recognizing my box it doesn't seem to be working....
well for that file type sir is prepared for alternate method,,,,keep looking for a rar file type which would be an image file after unzipped ,if you cant find rar file type image file you can use the alternate method check my top pinned comments
when you say not connected you mean not connected to the t.v. but you have to have it plugged in with power right?
At that point at which I say not connected,no wires or connection cable connected at all,at that point you would start program,load firmware,and start process,then you would connect usb cable while holding reset button in,no power cable or hdmi cable is to be connected throughout this process
MAC_either does not appear in my download
Here is a link to the exact file I used with Key
use chrome browser to get file
drive.google.com/file/d/1d4OivB0mWE40Vau-HxdPpOYoMfo_Drj_/view?usp=sharing
Hello, my box is the X96 mini. It has the red light continue. I can't reinitialize it with the thootpick method. Inside the processor is very diferent and small, and we cannot see the pins to short. So, what can i do now? :( Thanks in advance)
RESPONDER
Wouldn't it work with an on-disk on ki just with a USB cable?
Yes I saw your youtube video on this subject I had a question, in your video and states to use a double male USB, my question is on my box I have a USB port I also have a OTG port on the android box, can I use it instead of going out and buying a double male usb cable to transfer the data
Please tell me which box you have sir, and which version of android came stock.
Hi Daniel, my android tv box is not getting detected in Burning tool, nor is there any driver getting installed when I connect the android tv box to my system. Can you please advice
Sure I got you,tell me which box you have and which version of android came stock.
I have mxq 4k we used a week,but it dont turn on. Can you help us.
Some of the firmware only have the .zip and not .img - especially for the M8S/M8S+ firmwares.
I gotcha ,here is the solution
if all you can find is a zip file here is what to do,the zip file that you have is a firmware prepared for a different
method,you can keep looking for an img version of your firmware if there is one ,may not be one available yet,or you
can use what you have ,using alternate method,ile help with both if I
can,
now for the file that you have ,you should be able to un zip file and
inside should be a file named u boot bin ,among others,first you want
this program bootcardmaker ,that is the program that is needed for the
file you have now,here
www.mediafire.com/file/mf3s43g5tg2vn9n/Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1.0.1.rar
you need a micro sd card,put card into pc run application,first choose
disk a,b,c,d, whichever one is your memory card, check partition and
format choose your bin file click open and find the folder that you un
zipped click u boot bin,now click make,click ok and on next click start
ok ,ok ,close,ok,,now close program,go to memory card open now take all
the files inside un zipped folder and drag and drop into memory
card,,,when done ,remove memory card safely ,now put card into android
box,with a small pin or toothpick inside the av port you will find a
reset button,you want to have box all connected and off now press and
hold reset button while pressing power button hold at least ten seconds
you should see on the screen android on its side ,and you should now be
in recovery mode,,,hope that helps
Hi how did yiu getcthe Mc_ether file? I cant get that. I have the firmware ware for the Android T95 plus but i cannt find that file you have there and plus the reset button don't work on this box
Well like most things it was available at the time,do not worry about it bro I have that exact file I used the link to the file is in the comments section .here it is right here let me know if you have an issue.
drive.google.com/file/d/1d4OivB0mWE40Vau-HxdPpOYoMfo_Drj_/view?pli=1
Hi Mr Daniel, I have the Tronsmart AW80 Telos box running on kitkat 4.4.2. can I upgrade it to 6.0 and what box can I match it with ? Thanks
Glad you asked,see the thing about these box's is that rather than create an updated android O.s for your box or any box,what they do is create a new box which would also contain new hardware,,,now on that android version 4.2 would make it a good retro game box,install some game emulators and a game pad,and you have a decent game box,and sell or keep or give to a family member or friend,put the money on a new box,,,also to hold you over they have android emulators for Pc like nox,www.bignox.com or others like bluestacks ,andyOs ,,if you hooked Pc up to Tv with cable hdmi or vga,,that would be about the same as having the android box ,except for that your Pc would have better hardware than an android box,and the android emulators update for free,,if you need any help or have any questions feel free to ask,,,,,,,,,, and your welcome Sir ,I hope that helps.
My mxq 4k 6.0.1 box stuck android logo help me.. how to instal software
Ok this is what you need to fix your box Sir,,
rockchip this you need to fix your device
Rockchip device links below here you go This is for Rockchip devices
chinagadgetsreviews.com/how-to-easily-flash-firmware-on-rockchip-devices.html
1 install driver ,you will need this tool here www.mediafire.com/file/ntwz9lic3h0hzfi/Driver+Assistant_v4.5.rar ,,,.. 2 you will need this program here www.mediafire.com/file/768dc79pd2jb85j/RKBatchTool-v1.8.rar... Batch tool here, . read and follow directions on link 1 link 2 driver link 3 is tool
Here is your firmware
s47.filefactory.com/get/f/4b2u8m8jd36p/4a37109af6ed04d6/update786_MXQ-4K_20170407.rar
Let me know how it goes
Flash tv box MXQ 4k Android KitKa
I opened the box, it have cirkulation but problem is still there. Maybe i need to change paste, it was weird to me that thoes not stick, it should stick in contact with air i think. Box is less than one year old, worked maybe 6 months.
One of the problems I noticed long ago about these android tv box's is that they never shut down,,they stay in a standby mode which is basically on without display,which is why I unplug mine when it is not being used ,,,,should only need a small thin layer on graphics chip and cpu,,,it should stick but it is not glue.
If after you flash ,maybe wifi or ethernet does not work you will need to correct the time and date in settings,if still does not work try a different firmware ,the correct one will work perfectly as long as the specs meet everything will work,like you cant use a firmware for a box that has 10 gb memory if you have a 5 gb,,
I've been trying the zip file on china gadget but it always says error despite having downloaded the right firmware
ok sir for that file type here is what to do,,,
if all you can find is a zip file here is what to do,the zip file that you have is a firmware prepared for a different
method,you can keep looking for an img version of your firmware if there is one ,may not be one available yet,or you
can use what you have ,using alternate method,ile help with both if I
can,
now for the file that you have ,you should be able to un zip file and
inside should be a file named u boot bin ,among others,first you want
this program bootcardmaker ,that is the program that is needed for the
file you have now,here
www.mediafire.com/file/mf3s43g5tg2vn9n/Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1.0.1.rar
you need a micro sd card,put card into pc run application,first choose
disk a,b,c,d, whichever one is your memory card, check partition and
format choose your bin file click open and find the folder that you un
zipped click u boot bin,now click make,click ok and on next click start
ok ,ok ,close,ok,,now close program,go to memory card open now take all
the files inside un zipped folder and drag and drop into memory
card,,,when done ,remove memory card safely ,now put card into android
box,with a small pin or toothpick inside the av port you will find a
reset button,you want to have box all connected and off now press and
hold reset button while pressing power button hold at least ten seconds
you should see on the screen android on its side ,and you should now be
in recovery mode,,,hope that helps
pls help my tv box mx10 pro 6k. when im flashing the pc said usb not reconized..but i totaly install the driver
Which version of android came stock and how long have you had the box?
Daniel,
I watch your video but in my case my android box doesn't show anything just red light
I can't connect to the tv.
Thanks for help
me to
Hi Wizard i found the proper Firmware for my box , but when extracted its a Zip file not .img I don't know how to convert it
for what you speak of you would need boot card maker ,what type of box do you have?
P.S.
Sir, You dragged the file "mac-ether " first, what is it? I havn`t it in .img folder. THANK YOU
same here
i followed all the steps but my mxq pro 4k doesnt show up in the burning tool.
try this,,
download software to install to get driver for box www.mediafire.com/file/0s5q2nf... download firmware chinagadgetsreviews.com/firmwares download latest software for use www.entertainmentbox.com/how-... now instead of making the license folder ,the latest software includes folder with all keys put your firmware img into the license folder that is in latest software folder now after you have installed the software from first link,so that driver is properly installed from box proceed to run the latest software.for a successful FLASH.
pls someone help me with my HM Android tv box. i want to hard reset it using the usual by pressings inside AV reset button but it won't work...so pls give me any idea. thank u
Tengo un tv Box mx pro 4k y cuando lo conecto se habren las dos primeras páginas y luego se pone a optimizar hasta 22 aplicaciones pero nunca llega a hacerlo y se bloquea y tengo que apagarlo y volverlo a encender. Alguien me puede decir como resuelvo este problema, por favor. Muchas gracias
Do I have to use a USB to USB cable or can I use a split OTG cable?
Which box do you have?
@@DanielJurcichHeyou MX9 Pro
What if I didn't find my T.V Box brand " Utopia X96PLUS" 4k run on Android 7.1 , problem is I charged one. SA file name, the device hang on welcome screen, hard reset doesn't work
well what you are looking for is X96Plus ,,stick to that and the original android version that came on your box stock.
Hey Mr Wizard, great video, just checking, I have an Android Droid Player MXQ. It's currently running 4.4.2 but I'd like to upgrade it to 5.1. Can you tell me if your method will allow that? If you can point me in the right direction for the appropriate firmware that would be great. Many thanks
Thank you Sir,well I will say this if firmware for your box exist,you should be able to update from settings,,from what I know bro you need to have MXQ pro or better,I checked websites for you and the highest I saw for your box is kit kat,,,Now all is not lost though ,if your box still works sell it get as much as you can being fare on price,and put that money on a MXQ pro or better ,comes with 5.1 and upgrades to 6.0 ,,I put mine back to 5.1 it is the windows 7 of Android,,I got my box for cheap ,,here is what I bought
www.amazon.com/Acent-Android-Amlogic-Support-smarttvplayer/dp/B01N5GJZS0/ref=sr_1_22?s=electronics&ie=UTF8&qid=1493217344&sr=1-22&keywords=mxq+pro+4k
Though I will say this which ever you choose to do on these android box's having plugged in all the time is like it being on all the time and they burn up much faster because of that,,,mine I have had for some time now and it works great,only thing is I unplug when im not going to use for extended periods of time,only thing I have to do is set time and date and all is a go,,,I hope this has helped you,if you have any further questions feel free to ask,,Thanks for watching ,Have a Good day
hi Mr Daniel I have Huawei ec6108v9 STB, how to install firmware and please share the downloading link,
What should i do to my box it says can't mount, failed to mount, what's the problem, i just reset it
which box do you have and which version of android came stock on it?
you are the best bro thankyou for the help God bless you
WOW,your very welcome Bro im happy to have helped
I did factory reset through settings not on the back, what should I do now
First tell me please what the issue is that you are having with your box.
Can't get this to work with my Mecool KM9 box.... I followed the steps carefully, but it doesn't work. When I try loading the image, nothing happens on the USB Burning Tool. And if I connect the device, nothing happens on the program either :/
Which version of android came stock on your box?
@@DanielJurcichHeyou I think it was 8.1, though it was advertised as 9...
@@alien_zombie Ok first do this
download software to install to get driver for box
www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar
download firmware
download latest software for use
quickfileshare.org/LI/NEW_USB_Burning_Tool.zip
now instead of making the license folder ,the latest software includes folder with all keys
put your firmware img into the license folder that is in latest software folder
now after you have installed the software from first link,so that driver is properly installed from box
proceed to run the latest software.for a successful FLASH.
this should be your firmware ,,do these things,,remember to have the box connected to pc when you run software from first link,box must be connected while installing software,that is when the driver is installed,but if box is not connected during installation ,driver will not be properly installed,,do these things ,and get back to me
geekbuying.mediafire.com/file/3bnl9e362x648qs/MECOOL_KM9_20181205.img/file
I recently purchased three Mxq pro 4K but all of them getting hanged and I cannot find Realtek chipset on the same board .When I tried to flash your firmware, It is not detecting even with pressing reset button which is near to the AV. Kindly help me to fix these issues.
well first i will say this ,if you just bought them and they are all messed up,return them,for a refund,could be a hardware issue or a programing issue,either way if you just bought them,and they do not work,,,,,,if you decide to keep them tell me witch android version came stock on your box's
I watched your video, but I wonder what can I do in case there is no reset button on my box? Do you think it can detect automatically or do I have to try to do the short pin method? Your input is appreciated. Thanks
Let's see,your welcome by the way,first tell me,which box you have and what happened that caused you the need to flash the firmware.
@@DanielJurcichHeyou What happen is that the box gets locked in start up loop so to speak. It will go on and on start to open android apps but nothing happens
@@DanielJurcichHeyou by the way I have the same box as the one you shown on your video. it is an MXQ PRO 4 K with android version of 5.1.1 if I am not mistaken. Now , I can't open to confirm that. Does it matter the number on the chip? what I can read on the top is SDTNGAMA 0086. There are other letters and numbers on it.
@@paulg7392 Ok first is if you have the same box as one in video the reset button is located inside at the bottom of the av port it is a small push button switch when you push it you have to hold it in,for a few seconds until you see it start working on screen,,,,and the problem you speak of I also have had,which is why I made the video,,I would not open it up,,no reason to,,this one should be your firmware choose slow download,,www.filefactory.com/file/5zz7h3yz9r2r/L-MXQPRO-KODI-0511.zip
I download that yesterday It was corrupt, I'll try again with other android tool. Thank
You are welcome,if you have any issues let me know,,you should be good to go
@@DanielJurcichHeyou it stayed with the old one nothing or i have to fomat it?
Hi, can you tell me the name or extension of the files that I need to copy into the licenses folder in order for it to work?
Amlogic Mac keys for all Amlogic boxes
quickfileshare.org/LI?pt=a5TyXFFlmzNXFXmyIGPtT2CVN1qwgpnS1jRBV%2B9NwVo%3D
My box is resetting date and time. When I set to get the settings from network, it set the region to china, and finally it fails - the time and date still are wrong.
You will have to set manually ,and make sure the box does not lose power,or you will have to set time and date again.
@@DanielJurcichHeyou this is exactly the case. I configure the box to manual settings and the box doesn't loose the power. But after a while the date time settings get wrong instead. Sometimes when I turn the box off using remote (sleep mode) it wakes up by itself.
Try this reset your modem and reset your router,and set the time and date to automatic on your box.let me know if that helps
Lookin for a video to setup boxes preloaded with a usb stick?
unfortunately the toothpick method didn't work, I will keep searching for the image file to flash the nand. thanks for your help.
sure thing,any questions just ask
Tq sir.... You light up my day
عفوا أ. محمد هل حصلت برنامج بامتداد img ؟ مع الشكر
can anyone tell me what the mac ether file is or does as im unable to find it on the lists he mentions
download software to install to get driver for box
www.mediafire.com/file/0s5q2nfsx1ayiop/USB_Burning_Tool_v2.0.8_x86.rar
download firmware
chinagadgetsreviews.com/firmwares
download latest software for use
quickfileshare.org/LI/NEW_USB_Burning_Tool.zip
now instead of making the license folder ,the latest software includes folder with all keys
put your firmware img into the license folder that is in latest software folder
now after you have installed the software from first link,so that driver is properly installed from box
proceed to run the latest software.for a successful FLASH.
im following the same proceedure as yours, hope i can make mine work. its a mx10pro 6k and completely dead. red led is on when connected to power supply
Which version of Android came stock on your box?
will this work even if the lights do not come on ? I have an MXQ 4K box after I plugged it in, it worked for a short time then the screen went green and the blue light went out
That light does not matter,,on my box the light stopped working the next day,but the box works great,,,and I find that the light was very intrusive to my vision and I did not mind that it stopped working,,,but yes this will work for you
thanks, i will give it a try
Thank you mr. wizard for the great detailed video. A quick question, that file that you said was important in the Amlogic burning tool (mac_ether) it was not available on the burning tools i downloaded, there was a read_me file instead! If that file is important where can I get it from?
Thanks
Your welcome,,,not a prob ,this is copied and pasted from show more,
download software to install to get driver for box www.mediafire.com/file/0s5q2nf... download firmware chinagadgetsreviews.com/firmwares download latest software for use quickfileshare.org/LI/NEW_USB... now instead of making the license folder ,the latest software includes folder with all keys put your firmware img into the license folder that is in latest software folder now after you have installed the software from first link,so that driver is properly installed from box proceed to run the latest software.for a successful FLASH.
on the latest software you have to wait for the timer and choose download now,,,if you have any further questions just ask
Thanks for your prompt response. I’ve got an error at 7% of the format. It says [0x302201004]UBOOT/Disk initialize/send command/error result. I connected the android box after I started the USB burning tool, any idea what might be causing the error. Thanks again
which android version came stock on your box
Good question, I’m not sure, I realized how important the specifications after the box died. It looks exactly like yours MXQ Pro in silver color on the box with 4K in red underneath
Hi.. would like to know the difference between this method and factory reset
Sure ok ,first with a factory reset your device has to fully function to do a factory reset ,and a factory reset consist of returning your device to when you first got it new which removes any apps you put on it and removes your information from memory of the box,,,,now with flashing firmware ,it will do the same thing as a reset ,but flashing firmware is for recovery only ,,as in when your box won't work and will not let you reset because the device will not work at all,,,,,often others attempt to update their android os version by flashing newer firmware,which results in their device stops working,because the newer android version is made for a newer box and the device drivers do not match what they have in their box,,,So remember this , to flash firmware only use the version of android that came on your box ,,the thing to look for if you are going to flash it,,is first search by the name on the box ,then only choose the one with same android version
Hi I have an MXQ Amlogic S805 stuck on boot logo. I factory reset and 1 week later AGAIN. So I want to flash it but no matter which FW I download it's a zip file with a recovery.img file in it and it gives me a parse error. Tried a bunch.. all do the same.
I finally got an image but when I start it nothing happens..
ok not a problem at all,in fact I have answered that question a time or two before ,so I will copy and paste from previous response,,,,,,,,if all you can find is a zip file here is what to do,the zip file that you have is a firmware prepared for a different
method,you can keep looking for an img version of your firmware if there is one ,may not be one available yet,or you
can use what you have ,using alternate method,ile help with both if I
can,
now for the file that you have ,you should be able to un zip file and
inside should be a file named u boot bin ,among others,first you want
this program bootcardmaker ,that is the program that is needed for the
file you have now,here
www.mediafire.com/file/mf3s43g5tg2vn9n/Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1.0.1.rar
you need a micro sd card,put card into pc run application,first choose
disk a,b,c,d, whichever one is your memory card, check partition and
format choose your bin file click open and find the folder that you un
zipped click u boot bin,now click make,click ok and on next click start
ok ,ok ,close,ok,,now close program,go to memory card open now take all
the files inside un zipped folder and drag and drop into memory
card,,,when done ,remove memory card safely ,now put card into android
box,with a small pin or toothpick inside the av port you will find a
reset button,you want to have box all connected and off now press and
hold reset button while pressing power button hold at least ten seconds
you should see on the screen android on its side ,and you should now be
in recovery mode,,,hope that helps
wrong firmware is all,do not worry or give up,you are very close
Sir thank for video.
But i have one problem actually my android box is stuck on logo.and when i connect with pc my pc not detect to android box.any suggestion please(sorry for my bad English)
You are welcome ,Your english is good Bro,on that ,I would try to only use the one usb connection on that,if you have 2 things plugged in side by side they share the voltage of that usb block,also try different Pc if that does not do it,try that and get back to me,im happy to help.
great video have the mxq pro can get the 5.1.1 to work but can't find a 6.0 to work have you had any luck?
on that box,,to update from working,go to system settings ,,go to more settings,go to about media box,,right at the top check for updates,,if one is available ,,on these Box's often people want to flash to get newer android,
Daniel, I have the MX III Android TV Box with OS Android 4.4.2 . Can you help me salvage that one. Would like to bring it up to 5.1 if possible.
Actually ,,that is not possible,that box is stuck with 4.4.2,,one thing to understand about these android tv box's ,is this,rather than create an update to your box they decided to create a whole new box with all different hardware to go with the latest android os ,,any company that does create updates will charge you at the time of purchase for that update it is tied into the price of the box,,for example a n android box that cost 40 bucks,,will not update,,but a box that cost 80 to 100 bucks will update at least one time,,but here is the thing,the box that can update,will be running on outdated hardware,but have a newer android os than original,,so the trick is not to spend more than 40 bucks,and to sell it later and put the money on a new box,,buy for 40 sell for 25,and it should only cost you 15 to 20 bucks each time to stay up to date on android operating system
@@DanielJurcichHeyou thanks for the reply. Greatly appreciated.
@@alejandroortiz9121 your welcome bro
When I unzip the file and can't get mine to show up like yours with the mac_ether and the setup file. trying to figure out what I'm doing wrong
problem is the file type you have is prepared for alternate method,,,,you can look in my top pinned comments to find instruction on alternate method,,,or you can keep looking for a rar file type which would contain an image file
if all you can find is a zip file here is what to do,the zip file that you have is a firmware prepared for a different
method,you can keep looking for an img version of your firmware if there is one ,may not be one available yet,or you
can use what you have ,using alternate method,ile help with both if I
can,
now for the file that you have ,you should be able to un zip file and
inside should be a file named u boot bin ,among others,first you want
this program bootcardmaker ,that is the program that is needed for the
file you have now,here
www.mediafire.com/file/mf3s43g5tg2vn9n/Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1.0.1.rar
you need a micro sd card,put card into pc run application,first choose
disk a,b,c,d, whichever one is your memory card, check partition and
format choose your bin file click open and find the folder that you un
zipped click u boot bin,now click make,click ok and on next click start
ok ,ok ,close,ok,,now close program,go to memory card open now take all
the files inside un zipped folder and drag and drop into memory
card,,,when done ,remove memory card safely ,now put card into android
box,with a small pin or toothpick inside the av port you will find a
reset button,you want to have box all connected and off now press and
hold reset button while pressing power button hold at least ten seconds
you should see on the screen android on its side ,and you should now be
in recovery mode,,,hope that helps