Merrry Christmas! Those Ramps turned out great im loving the bong collection too! The shop is looking friggin awesome too thank you for the update! Peace ✌️
Yeah, I like my LC 80 I got the dark gray one, right now the front diff gears stripped, I got new ones just ain’t put them in yet. Well as always appreciate the video. Yeah those ramps are pretty awesome. I’d want two sets. Well I’ll watch for the next one.👀👀 until next time peace and chicken grease😁👍👍👋👋😎
That bridge set is awesome, I printed them myself and use them when needed. I didn’t use the pins that you can print with it, i used some thin fiberglass rod
Thank you for checking out the channel. I do enjoy my FMS rigs. They have really been improving their game lately. I haven't had any from fair RC. I love how fair rc fixes them up and paint them real nice with Patina? I think they look great, but they won't send me stuff & sponsor me like FMS does. It would be awesome. One of the things i'm not very good at is patina, work.
Thanks buddy. I got the leg lamp at Dollar General a couple of years ago. Unfortunately, it doesn't light up. It's solar powered in the lamp, shade, rocks back-and-forth, but no light. Lol
Have you had the 2194 error on your printer yet? Well if you do, download the firmware update for the printer. It fixes that error and the under score symbol _ on their key board. I had issues right out of the box, but when it prints good I love it!
Most of it, There's probably about 10% waste if you're doing a lot of support and stuff. It looks like more, but the supports are really thin. Not as much material as what goes into the print. I'm learning that if I print small to only do one at a time, just in case there's a mistake, there's less waste.
@ezboyrc553 Seems like a lot from just one spool though! In my mind I could see that ramp taking a whole spool. Seems like a spool makes way more than I thought!
@EricsRC i thought you meant how much waste was coming off each print. i'm printing the second ramp now. Both ramps probably take about half of the roll. But they are 24 inches probably 2 and a 1/2 inches wide and 3/4 thick.
Those supports are from the automatic support setting you turned on. You should’ve done manual supports for the hinges. It would’ve been less waste and less time. You keep saying they, as in a human made a decision to put Support there. But no, it is based off of the numbers in your software that you can change yourself. According to the preview, the supports were not in there. They were not in the model, so therefore no human other than you put those there.
There really wasn't that much supports. On this print, it only added 20 minutes to the overall time. But I will figure stuff out as I go.Eventually, it's my first week with one.
Hey, I love those piece pipes😁👍👍
your picking the printing up really fast, nice to see all the stuff thats coming out of it. merry Christmas to you and your family 🎄🎄
@julianweeks326 Thanks buddy Merry Christmas
El ca bong!!! Lol! Great video brother 👍
New.
Administration
Merrry Christmas! Those Ramps turned out great im loving the bong collection too! The shop is looking friggin awesome too thank you for the update! Peace ✌️
Thank you, brother. Merry Christmas
Wow you're getting good with the 3d printing ! Great idea , hauler ramps ! Merry Christmas 🎅 🎄 🤶 Great video
Thank you, buddy, merry christmas.I hope you and your family had a great one.
Looks great, good job! 👍 👍
Great to see a fresh video and glad you're doin good man. Merry Christmas! 🎄
I like the idea of a hinged wall on that outer corner.
Hope you had a great Christmas also, I’m here watching Thursday, December 26 watching now 6:47 PM pretty cool ramp system👍👍
1 minute ago, cool.
Merry Christmas
Merry Christmas from Sweden !!!
Awesome, Merry Christmas, buddy
Yeah, I like my LC 80 I got the dark gray one, right now the front diff gears stripped, I got new ones just ain’t put them in yet. Well as always appreciate the video. Yeah those ramps are pretty awesome. I’d want two sets. Well I’ll watch for the next one.👀👀 until next time peace and chicken grease😁👍👍👋👋😎
Finishing up my 2nd set of ramps now, I still have to make the top piece for them all. When my red filament shows up. Thanks for watching, buddy.
Happy Holidays to you ad yours God Bless.
Thank you, buddy, same to you.
That is awesome
A late. merry, Christmas and a happy, New Year.Nice video
Thanks, buddy, you too
Merry Christmas, EZ!
Thanks, buddy, Merry Christmas and Happy New Year to you and your family as well.
That bridge set is awesome, I printed them myself and use them when needed. I didn’t use the pins that you can print with it, i used some thin fiberglass rod
Yeah, I didn't print the pins either. I figured I might just use a nut & bolt or something. Thanks for watching.
Merry Christmas guy and it looks like we got a 3-D printing monster lol
Thanks buddy. Merry Christmas
Mindseye channel suggested your channel. Really love the FMS models. Some of the FairRc versions are killer also.
Thank you for checking out the channel. I do enjoy my FMS rigs. They have really been improving their game lately. I haven't had any from fair RC. I love how fair rc fixes them up and paint them real nice with Patina? I think they look great, but they won't send me stuff & sponsor me like FMS does. It would be awesome. One of the things i'm not very good at is patina, work.
Merry Christmas!!!
You too buddy.
Very cool indeed
Hope all is well with you and your family and yall had an awesome Christmas
Yes, sir. Thank you, Merry Christmas.
Merry Christmas and Happy New Year
You too buddy.
WPL has a Servo controlled Ramp on there Trailer. You could totally do it. Either way, that will work for ramps.
helps to stable the print on the bed.
Where can I get one of those mini movie leg lamps ? That's awesome. I love the detail in your scale garage
Thanks buddy. I got the leg lamp at Dollar General a couple of years ago. Unfortunately, it doesn't light up. It's solar powered in the lamp, shade, rocks back-and-forth, but no light. Lol
Shoot.
Just mounted on the truck
Have you had the 2194 error on your printer yet? Well if you do, download the firmware update for the printer. It fixes that error and the under score symbol _ on their key board. I had issues right out of the box, but when it prints good I love it!
Mine didn't have any symbols. Mine has worked perfectly so far.
I think the newer ones have new firmware now.
Very cool, where can one find this STL file to print?
I think I got the file from Cults 3d I will see if I can find what is listed as. so you can look it up.
How much of that filament gets used?
Most of it, There's probably about 10% waste if you're doing a lot of support and stuff. It looks like more, but the supports are really thin. Not as much material as what goes into the print. I'm learning that if I print small to only do one at a time, just in case there's a mistake, there's less waste.
@ezboyrc553 Seems like a lot from just one spool though! In my mind I could see that ramp taking a whole spool. Seems like a spool makes way more than I thought!
@EricsRC i thought you meant how much waste was coming off each print. i'm printing the second ramp now. Both ramps probably take about half of the roll. But they are 24 inches probably 2 and a 1/2 inches wide and 3/4 thick.
i decided to buy 3 trucks on the 3rd inpired by the vids man
Hell yeah, thanks buddy, I appreciate it. If you're looking for something from FMS click on the link in the description.It helps the channel.
Those supports are from the automatic support setting you turned on. You should’ve done manual supports for the hinges. It would’ve been less waste and less time.
You keep saying they, as in a human made a decision to put Support there. But no, it is based off of the numbers in your software that you can change yourself. According to the preview, the supports were not in there. They were not in the model, so therefore no human other than you put those there.
Well, excuse my vocabulary. Must have said it the wrong way. Lol
I just got the printer, so i'm learning.
There really wasn't that much supports. On this print, it only added 20 minutes to the overall time. But I will figure stuff out as I go.Eventually, it's my first week with one.
Probably.70 bucks$