Hey brother appreciate your videos thank you so much have a 09 Nissan Altima hybrid would make that loud noise that it made after you replaced the inverter I replaced the hybrid battery in the 12 volt battery now I get no crank no start at all
JVFIX, I praise you for being so kind in answering ALL questions posted. I, myself I'm having an issue with my 2008 Altima Hybrid. Yesterday, while driving home, I noticed the "Service Engine Soon" and both, HV battery and 12V battery lit up. When I got home I scanned the car and got a code P0AC4 which was to do with the Hybrid power train module. Do you have any suggestions as to where should I start checking. I appreciate your excellent work.
@@JVFIXLLC Thanks for your answer. I have a ELM-327 Bluetooth scanner which I use with the Car Scanner Pro App, and my Android tablet. I'm not sure if this is what you call a "regular scanner". How do I read the code stored in the Hybrid module, please? Someone suggested that my hybrid battery inverter is about to give up, and I should replace it. What's your opinion? Thanks!!
Interesting video, my son bought a 2009 Altima Hybrid with 130k miles. It works when it wants to. But when it does it only goes about 25mph then it slows down to a stop. We then have to stop and restart the car. Or put it into nurture and let it coast, and then it seems to want to go again. The HV battery is very low and never seams to charge (always on low). No check engine lights. We're in the Phoenix area. Do you know of anyone that might work on them here or do you have any suggestions for us? Thank you in advance
you have a really interesting issue too, first thing i would do is get a scanner and with that you can check if the temperature of the battery pack is normal i have seen on electric cars that if the batteries overheat it limits the car speed and it stops the charge cause when is charging the batteries get hot just like a phone if it gets too hot it slows down and tries to almost turn off by itself so it doesn't damage the battery.
that code means that you have codes stored in the hybrid powertrain module. you will need a scanner to access those deep codes. what is wrong with the car does it turn on or not at all.
Hey JVfix, I have a 2007 hybrid Nissan Altima. Recently it was too hot here in SoCal and while driving I got service engine soon warning. Then the car stopped going into the Hybrid mode, though the hybrid battery is getting charged as normal. Also, the “Ready” Green light is also ON for hybrid but the car is only running on gas. Do you think it’s the inverter problem or something else. Do you know some can fix it for good price on SoCal. Thanks
I don't think it's an inverter problem because it wouldn't even let u start the car sounds more like if the battery pack got overheated. I had a similar issue with a Buick where the fan that cools down the battery when out. it's on my playlist under gmc cars but gmc has a really different system than nissan so symptoms could also be different. but it's a closer idea of what are u experiencing. maybe if you could scan the vehicle you could trace down the fault more quickly
@@JVFIXLLC I have a 200008 nissan altima same thing happened to me but, someday I wanted to install a stereo and burn a couple of fuses then replace some and for some reason, the car started to work in EV mode
Hello sir how are you doing?I"m very impressed with your experience and neath job on Nissan Altima hybrid 08 with same problem.Where is your shop if can help me with my Nissan Altima hybrid 08
I have a 2007 Nissan Altima 2.5s hybrid & ac not working but heat does first thing I did was replaced the cabin air filter. Also the low side holding pressure. Also another problem it’s pulling to the left when braking
Good video bro. Hey I have a similar vehicle that I went to check out today. I'm having trouble diagnosing it. I have a snap on modis and I cannot communicate with the PCM however I can communicate with the other modules. It's a no crank no start. Hooked up charged battery supply because it was low, checked wiring diagram for starting. There's a brake switch on the bottom, and the other sensor for start up. I wanted to check to see if I'd get a signal to the starter motor but I was baffled and could not find it. I noticed that manual transmissions do have one but automatics do not? In my diagram it does not show that. Would you be able to guide me through a diagnostic?
Ok if u can't communicate with the pcm that is the issue. Have u checked for the powers and the ground that goes to the ecu. And also if the grounds and powers are good it could be the ecu. I have seen many go bad because the ecu is in the hood next to the battery and it is exposed to water and dirt
@@JVFIXLLC I'm going to check tomorrow, but I think I figured it out. Must be a coil that is burning out the fuse that feeds the ecm relay. Unfortunately I didn't have power probe because I forget it at home. I had a small multi meter from harbor with small leads but not long enough. So tomorrow for sure going to check the fuses. Thanks for the help
@@automotivedefenz2195 I had similar issue as well with the ignition coils burning too I would recommend you to change all of them. They are cheap on ebay and there is many good quality ones out there.
Great video bro. Have a 07 Altima hybrid replaced few battery cells and also the 12v since it was going bad. Ever since doing that battery is no longer re charging. Only re charges when driven for a while and at speeds above 40mph. I remember it use to drop the battery charge and it automatically re charged and would go to EVMode. What can cause the battery to no longer re charge itself? Unable to find anything on this. Would really like to get this fix. Thank you!
That my friend it is a very interesting question and I am gonna do a bit of research on that because usually when it stops recharging the main hybrid battery the module right away detects that and it prevents the cars from starting as a safety measure.
@@JVFIXLLC I been doing lot of research as well and no luck. When I saw your video i wondered if the inverter was the problem. There's gotta be something that is not allowing the battery to re charge on its own. The funny thing is I don't detect any codes either. Thanks for writing back bro 👍
Hello bro, good video I have an Altima 2009 hybrid withe the same dtc, do you need to flash the new e- hybrid ecu that cames with the new inverter assembly?
u dont have to flash just install it and u will be good to go. just remember to unplug the rear 12v battery and also the hybrid battery and let it sit 10m or more to allow the system to discharge
Hello @JVFIX pls i really need your help i have Nissan Altima 2009 Hybrid ever since i changed the Brake pad the brake and service engine soon lights stays on since then BT surprisingly this last week Saturday the car refused to start... Once i press and press thumb it show arrow on Dashboard like it needs to press brake before starting which i alrdy did av checked the brake switch and it looks good any tips for this i will appreciate
The first thing u have to do is to make sure the rear 12v battery is good on volts. Then if it is good. You will need a scanner to scan the system to see what is preventing the car from starting.
Since this a hybrid most of the cars now days have lots of computers to control different systems on your car. And the only way to find out what's is wrong is scanning the car.
Well as for the 12v battery i think it's perfectly OK am suggesting maybe the hybrid battery is the cause am not sure yet however scanning is somehow difficult here in Nigeria they all asking me to bring down the car while car not starting at all
@@ahmedraheem5010 if the car is not staring and the 12v battery is good, i might suspect that the issue could be the inverter (the inverter is basically like the charger for the main hybrid battery like the one shown on the video) that's what most fails on the cars because the internal cells of the inverter shorts inside and the ecu detects that and cuts the power to the hybrid battery to prevent damage. now if the case is not that the it could be the main hybrid battery.
Hello JVFix... I've 2007 Altima Hybrid... car was idle for couple of months there 12V battery died. So replaced new Nissan 12V battery. I was able to start the car but VDC and Red triangle light came online. The fan over hybrid battery would run continuously. Dealer said replace Hybrid battery and gave $8k replacement estimate. So I took out hybrid battery, checked each cell and replaced couple of very weak cells which were not charging above 5000 milliamps.. Reassembled entire hybrid battery and installed it back in the car. After starting the car, ODI scanner reports P0AC4 and P0AFA codes. Cleared the codes few time but still same. Any suggestion would could be wrong and what I can do next?
Hey I have a question I am traying to buy a nissan hybrid but they told me that the battery is not good you think is gonna be hard to take it off and is it gonna be expensive thank your for your time on reading this I will apréciate a responde
Yea the main hybrid battery is hard to change and is located in the rear if the car behind the rear seats and y have strip down almost half car to take it out. What's the issue with ur car?
@@joseramirez850 I've seen on those hybrids that if the car was sitting for too long the main hybrid discharges. But it could work to normal once the car is started. If u had a scanner u could scan all the modules to see what codes u get.
I have a 2008 nissan altima hybrid i just want to ask bro if what is the problem on my car cuz when i jumpstart can run and if i turn off the car is totally dead even in the dashboard no light can pls help me what is the problem on it thanks man great video
Ok if it turns on that's a good thing it means is charging. But when u turn ot off and it doesn't start again then the problem could be your 12v battery located on the truck on the passenger side compartment. Get it tested at autozone and see if it holds charge and also if it does have good volts aswell
The mechanic install a new 12v battery but im not sure if its new🙂🙂🙂 cuz he just charges me 90$ for that...ok bro i go and buy some tester thanks and i let you know later cuz i really need help thanks man
@@JVFIXLLC i try to jumpstart and i check the 12v battery while the engine running its 14.6v but when i turn it off its not gonna start again eland when i check the battery its 0.80v
Hi. I have a 2009 Nissan Altima hybrid. I just bought it and was ripped off basically. But anyway, abs, brake light, vdc light came on and I thought maybe it was a sensor. I went to auto zone to have them scan it for codes. It ended up giving codes for the powertrain control module. No check engine light, not stalling but is running badly. Anyway, I'm guessing it needs to be replaced and that's such an expensive job at the dealer so I want to do it myself. No I'm not a mechanic lol, but I'm also not rich and can't afford to have the dealer fix it. So I don't have any other option. I'm worried because it's a hybrid though. I know I gotta unconnect the battery first regardless, but how do I do it safely? Also do you know where the modulle is located? I think it's in the engine compartment but I'm not sure because I can't find anything definitive and how do I get to it if it is in the engine compartment?
Hi, I have 2007 Nissan Altima hybrid that wont start. i got the code POA7A. how can i test the inverter and if is bad where can i buy one. the only thing did happen was that my car run out of gas on the freeway and after that won't run. i will like to call to you on the phone if is possible i want to fix my car. i live in California bay area.
the only way to test it is with a voltmeter special for high amperage and voltage but if you get that code is pretty much the issue the inverter, and you can find used ones on ebay or also you can call LKQ recycle and they give warranty.
Hello JVfix, I’ve 2011 hybrid altima, today I was trying to flush brake fluid like as normal one man type. But fluid was coming down so fast, that I stopped the process. Does hybrid Altimas need to be deactivated brake system or it’s normal for brake to come that fast? Thanks again for your help.
I have a 2010 Nissan Altima hybrid and there is a no start and all ignite turn on in dash but not getting a ready green light. Put a brand new battery in and tried everything. But no luck. I’m located in Fresno if there is any way you can help me diagnose it.
ok that's most likely not the issue then. do you have like a small scanner tool that you could hook to the car and get some codes. but if your car is not starting or cranking the issue might be the box that i changed in that video. that car that i fixed came from 2 shops and they could not find the problem they already changed the starter and the 12v battery. that box in the video is a hybrid alternator for the main hybrid battery and the cells inside it start to leak out and the computer sees that as a short and it stops the car from starting to prevent damage to the main hybrid battery.
you will need a pro scanner to dig more deep in that problem this code is for communication issue between modules I have seen the PCM fail a lot on these nissans
I have a 2007 Nissan Altima Hybrid and I get an error message of p04aC. After I changed a few battery cell. And now I get this code plus p0315, p0317, p0318. After clearing the codes I only get the error p04ac ecu mil. Can you help with this issue or have you came across this problem. Thank you in advance.
I have nissan altima hybrid 2011 I have problem with hybrid battery since i changed 6 cells, now the car can start but there is VDC , ENGINE CHECK on the display.. and the hybrid battery is disconnected ( not charging while driving) .. but in the morning the battery is to the half of it ..? I don't know if you can help
Hello JVFIX, I have a 2007 nissan altima hybrid i have an issue with the PCM is not working well and I need to replace it, can you tell me where is located it because I can't find it. Please and thank you 🙏
I have a start problem w my car where everything turns on but the engine, I’ve replaced the brake switch and the steering column lock but it still doesnt start, any ideas why?
Yea iam in cali. For that issue I would start by checking the fuses. I can provide u a wiring diagram to find the correct fuse. By the way do u have knowledge of how to use a multimeter
I had a small accident I ran into the back of someone my car shut completely off I have 2010 Nissan hybrid the manual told me it has a shit off switch but the dealership want work on it cause they did continued
jvfix Yes I went and bought a new battery charger. My other one was about 40 years old. So this new one tells me if the battery is good or not. So it came back as battery bad after charging all night.
Hey brother appreciate your videos thank you so much have a 09 Nissan Altima hybrid would make that loud noise that it made after you replaced the inverter I replaced the hybrid battery in the 12 volt battery now I get no crank no start at all
Yes it will
All these old nissans suffer from inverter failure
JVFIX, I praise you for being so kind in answering ALL questions posted. I, myself I'm having an issue with my 2008 Altima Hybrid. Yesterday, while driving home, I noticed the "Service Engine Soon" and both, HV battery and 12V battery lit up. When I got home I scanned the car and got a code P0AC4 which was to do with the Hybrid power train module. Do you have any suggestions as to where should I start checking. I appreciate your excellent work.
if u read that code with a regular scanner is just telling u that u have a code stored in the hybrid module.
@@JVFIXLLC Thanks for your answer. I have a ELM-327 Bluetooth scanner which I use with the Car Scanner Pro App, and my Android tablet. I'm not sure if this is what you call a "regular scanner". How do I read the code stored in the Hybrid module, please? Someone suggested that my hybrid battery inverter is about to give up, and I should replace it. What's your opinion? Thanks!!
Interesting video, my son bought a 2009 Altima Hybrid with 130k miles. It works when it wants to. But when it does it only goes about 25mph then it slows down to a stop. We then have to stop and restart the car. Or put it into nurture and let it coast, and then it seems to want to go again. The HV battery is very low and never seams to charge (always on low). No check engine lights. We're in the Phoenix area. Do you know of anyone that might work on them here or do you have any suggestions for us?
Thank you in advance
you have a really interesting issue too, first thing i would do is get a scanner and with that you can check if the temperature of the battery pack is normal i have seen on electric cars that if the batteries overheat it limits the car speed and it stops the charge cause when is charging the batteries get hot just like a phone if it gets too hot it slows down and tries to almost turn off by itself so it doesn't damage the battery.
Hey, I got the same code. Would I be able to pm you about a few questions.
tea u can send me a message to my email
jvfix2023@gmail.com
Great video, I have a 2009 Nissan Altima that’s giving me the code POAC4 any idea what’s going on ??
that code means that you have codes stored in the hybrid powertrain module. you will need a scanner to access those deep codes. what is wrong with the car does it turn on or not at all.
Hey JVfix, I have a 2007 hybrid Nissan Altima. Recently it was too hot here in SoCal and while driving I got service engine soon warning. Then the car stopped going into the Hybrid mode, though the hybrid battery is getting charged as normal. Also, the “Ready” Green light is also ON for hybrid but the car is only running on gas. Do you think it’s the inverter problem or something else. Do you know some can fix it for good price on SoCal. Thanks
I don't think it's an inverter problem because it wouldn't even let u start the car sounds more like if the battery pack got overheated. I had a similar issue with a Buick where the fan that cools down the battery when out. it's on my playlist under gmc cars but gmc has a really different system than nissan so symptoms could also be different. but it's a closer idea of what are u experiencing. maybe if you could scan the vehicle you could trace down the fault more quickly
@@JVFIXLLC I have a 200008 nissan altima same thing happened to me but, someday I wanted to install a stereo and burn a couple of fuses then replace some and for some reason, the car started to work in EV mode
Good job, partner… looking forward to collaborate …
Any time
Hello sir how are you doing?I"m very impressed with your experience and neath job on Nissan Altima hybrid 08 with same problem.Where is your shop if can help me with my Nissan Altima hybrid 08
I am in visalia California
I have a 2007 Nissan Altima 2.5s hybrid & ac not working but heat does first thing I did was replaced the cabin air filter. Also the low side holding pressure. Also another problem it’s pulling to the left when braking
Good video bro. Hey I have a similar vehicle that I went to check out today. I'm having trouble diagnosing it. I have a snap on modis and I cannot communicate with the PCM however I can communicate with the other modules. It's a no crank no start. Hooked up charged battery supply because it was low, checked wiring diagram for starting. There's a brake switch on the bottom, and the other sensor for start up. I wanted to check to see if I'd get a signal to the starter motor but I was baffled and could not find it. I noticed that manual transmissions do have one but automatics do not? In my diagram it does not show that. Would you be able to guide me through a diagnostic?
Ok if u can't communicate with the pcm that is the issue. Have u checked for the powers and the ground that goes to the ecu. And also if the grounds and powers are good it could be the ecu. I have seen many go bad because the ecu is in the hood next to the battery and it is exposed to water and dirt
@@JVFIXLLC I'm going to check tomorrow, but I think I figured it out. Must be a coil that is burning out the fuse that feeds the ecm relay. Unfortunately I didn't have power probe because I forget it at home. I had a small multi meter from harbor with small leads but not long enough. So tomorrow for sure going to check the fuses. Thanks for the help
@@automotivedefenz2195 I had similar issue as well with the ignition coils burning too I would recommend you to change all of them. They are cheap on ebay and there is many good quality ones out there.
Great video bro. Have a 07 Altima hybrid replaced few battery cells and also the 12v since it was going bad. Ever since doing that battery is no longer re charging. Only re charges when driven for a while and at speeds above 40mph. I remember it use to drop the battery charge and it automatically re charged and would go to EVMode. What can cause the battery to no longer re charge itself? Unable to find anything on this. Would really like to get this fix. Thank you!
That my friend it is a very interesting question and I am gonna do a bit of research on that because usually when it stops recharging the main hybrid battery the module right away detects that and it prevents the cars from starting as a safety measure.
@@JVFIXLLC I been doing lot of research as well and no luck. When I saw your video i wondered if the inverter was the problem. There's gotta be something that is not allowing the battery to re charge on its own. The funny thing is I don't detect any codes either. Thanks for writing back bro 👍
Hello bro, good video I have an Altima 2009 hybrid withe the same dtc, do you need to flash the new e- hybrid ecu that cames with the new inverter assembly?
u dont have to flash just install it and u will be good to go. just remember to unplug the rear 12v battery and also the hybrid battery and let it sit 10m or more to allow the system to discharge
@@JVFIXLLC I confirm no programming needed…
Hey bro, do you recommend this car on 2021?
These cars are really good in gas, with good maintenance on time it could last a long time.
Hello @JVFIX pls i really need your help i have Nissan Altima 2009 Hybrid ever since i changed the Brake pad the brake and service engine soon lights stays on since then BT surprisingly this last week Saturday the car refused to start... Once i press and press thumb it show arrow on Dashboard like it needs to press brake before starting which i alrdy did av checked the brake switch and it looks good any tips for this i will appreciate
The first thing u have to do is to make sure the rear 12v battery is good on volts. Then if it is good. You will need a scanner to scan the system to see what is preventing the car from starting.
Since this a hybrid most of the cars now days have lots of computers to control different systems on your car. And the only way to find out what's is wrong is scanning the car.
Well as for the 12v battery i think it's perfectly OK am suggesting maybe the hybrid battery is the cause am not sure yet however scanning is somehow difficult here in Nigeria they all asking me to bring down the car while car not starting at all
What symptoms will i get if the hybrid battery is dead pls???
@@ahmedraheem5010 if the car is not staring and the 12v battery is good, i might suspect that the issue could be the inverter (the inverter is basically like the charger for the main hybrid battery like the one shown on the video) that's what most fails on the cars because the internal cells of the inverter shorts inside and the ecu detects that and cuts the power to the hybrid battery to prevent damage. now if the case is not that the it could be the main hybrid battery.
Hello JVFix... I've 2007 Altima Hybrid... car was idle for couple of months there 12V battery died. So replaced new Nissan 12V battery. I was able to start the car but VDC and Red triangle light came online. The fan over hybrid battery would run continuously. Dealer said replace Hybrid battery and gave $8k replacement estimate. So I took out hybrid battery, checked each cell and replaced couple of very weak cells which were not charging above 5000 milliamps.. Reassembled entire hybrid battery and installed it back in the car. After starting the car, ODI scanner reports P0AC4 and P0AFA codes. Cleared the codes few time but still same. Any suggestion would could be wrong and what I can do next?
the codea you have are for the cells inside the battery pack. there could be a chance that some got a bit loose when you reassembled it
Hey I have a question I am traying to buy a nissan hybrid but they told me that the battery is not good you think is gonna be hard to take it off and is it gonna be expensive thank your for your time on reading this I will apréciate a responde
Yea the main hybrid battery is hard to change and is located in the rear if the car behind the rear seats and y have strip down almost half car to take it out. What's the issue with ur car?
Well they told me that is the battery that’s why it won’t run
@@joseramirez850 I've seen on those hybrids that if the car was sitting for too long the main hybrid discharges. But it could work to normal once the car is started. If u had a scanner u could scan all the modules to see what codes u get.
I have a 2008 nissan altima hybrid i just want to ask bro if what is the problem on my car cuz when i jumpstart can run and if i turn off the car is totally dead even in the dashboard no light can pls help me what is the problem on it thanks man great video
Ok if it turns on that's a good thing it means is charging. But when u turn ot off and it doesn't start again then the problem could be your 12v battery located on the truck on the passenger side compartment. Get it tested at autozone and see if it holds charge and also if it does have good volts aswell
The mechanic install a new 12v battery but im not sure if its new🙂🙂🙂 cuz he just charges me 90$ for that...ok bro i go and buy some tester thanks and i let you know later cuz i really need help thanks man
@@JVFIXLLC i try to jumpstart and i check the 12v battery while the engine running its 14.6v but when i turn it off its not gonna start again eland when i check the battery its 0.80v
Battery no good man.
Thanks man
awsommeeeee video
thanks
Also anyway to Run the Hybrid on Gasoline Only?
No there is no way to only run it like u want. Sorry
Do you have to flash the car?
Nop no need just remove part and install it
Hi. I have a 2009 Nissan Altima hybrid. I just bought it and was ripped off basically. But anyway, abs, brake light, vdc light came on and I thought maybe it was a sensor. I went to auto zone to have them scan it for codes. It ended up giving codes for the powertrain control module. No check engine light, not stalling but is running badly. Anyway, I'm guessing it needs to be replaced and that's such an expensive job at the dealer so I want to do it myself. No I'm not a mechanic lol, but I'm also not rich and can't afford to have the dealer fix it. So I don't have any other option. I'm worried because it's a hybrid though. I know I gotta unconnect the battery first regardless, but how do I do it safely? Also do you know where the modulle is located? I think it's in the engine compartment but I'm not sure because I can't find anything definitive and how do I get to it if it is in the engine compartment?
What codes did u get when u went to autozone?
I have a 2009 Nissan Altima hybrid I just bought and was told the starter batter needs replaced how much is that to fix
is yours hybrid too or regular gas engine?
Hi, I have 2007 Nissan Altima hybrid that wont start. i got the code POA7A. how can i test the inverter and if is bad where can i buy one. the only thing did happen was that my car run out of gas on the freeway and after that won't run. i will like to call to you on the phone if is possible i want to fix my car. i live in California bay area.
the only way to test it is with a voltmeter special for high amperage and voltage but if you get that code is pretty much the issue the inverter, and you can find used ones on ebay or also you can call LKQ recycle and they give warranty.
Same thing happened to me
How you fix it ?
My electric power staring system is jumping. Any reason why? It turns off sometimes. It’s a 2010 Nissan Altima hybrid
I have seen the positive connection at the battery sometimes starts to build up corrosion you might want to check that first.
Hello JVfix, I’ve 2011 hybrid altima, today I was trying to flush brake fluid like as normal one man type. But fluid was coming down so fast, that I stopped the process. Does hybrid Altimas need to be deactivated brake system or it’s normal for brake to come that fast?
Thanks again for your help.
I believe is the same process like any other car. Just make sure you bleed the brakes and is better if u have someone to help you with the brake pedal
Hi can you help me P0AC4 HV ECU MIL ON REQ ? Can you help me what to fix and how i can be sure ?
is your car starting or no and what car is it?
How do you get out of limp mode my hybrid battery is dead just want to drive with regular battery any idea
Unfortunately for hybrid cars there is no way to get out of limp mode if you don't fix the problem. Is just how the car was designed sorry.
I have a 2010 Nissan Altima hybrid and there is a no start and all ignite turn on in dash but not getting a ready green light. Put a brand new battery in and tried everything. But no luck. I’m located in Fresno if there is any way you can help me diagnose it.
U replaced the battery on the rear trunk the 12v battery right?.
jvfix yes with a brand new one.
ok that's most likely not the issue then. do you have like a small scanner tool that you could hook to the car and get some codes. but if your car is not starting or cranking the issue might be the box that i changed in that video. that car that i fixed came from 2 shops and they could not find the problem they already changed the starter and the 12v battery. that box in the video is a hybrid alternator for the main hybrid battery and the cells inside it start to leak out and the computer sees that as a short and it stops the car from starting to prevent damage to the main hybrid battery.
jvfix No I don’t have a scanner tool to get codes. Is there any way to salvage that box?
It’s stuck in my garage and I have no way of getting the codes from like autozone or anywhere
Any idea what could be wrong with a 2008 that turns on, goes into drive but won’t drive.
have u checked the transmission oil level?
I got a 2010 Altima started shaking then won't start. Got a scanner online code is U0100? Any idea what it could be?
you will need a pro scanner to dig more deep in that problem this code is for communication issue between modules I have seen the PCM fail a lot on these nissans
I'm sorry the Nissan Altima hybrid is 09 the car is not starting can you fix it for me and how much do you charge?
Do u have same code. Or the dashboard doesn't light up
I have a 2007 Nissan Altima Hybrid and I get an error message of p04aC. After I changed a few battery cell. And now I get this code plus p0315, p0317, p0318. After clearing the codes I only get the error p04ac ecu mil. Can you help with this issue or have you came across this problem. Thank you in advance.
wow that's a really interesting problem right there. you are gonna need a high end scanner to diagnose that problem.
I have nissan altima hybrid 2011
I have problem with hybrid battery since i changed 6 cells, now the car can start but there is VDC , ENGINE CHECK on the display.. and the hybrid battery is disconnected ( not charging while driving) .. but in the morning the battery is to the half of it ..?
I don't know if you can help
MM THIS ACTUALLY THE FIRST TIME I HEARD A PROBLEM LIKE THIS, HAVE U TRIED READING THE STORED FAULT CODES IN THE MODULE?
hello friend, I have a 2007 altima hybrid when it goes over 40 mph the car turns off, what could be wrong?
do you have check engine on? if you do is there a way you can scan for codes i might help you out.
How much did you pay for the new Inverter? I was quoted almost $7,000 for 2007 Inverter.
I paid 400 for the inverter and it was used. There is a lot of them on ebay and new ones also. Cheaper than the stealership.
Stealership jaja nice
Hello JVFIX, I have a 2007 nissan altima hybrid i have an issue with the PCM is not working well and I need to replace it, can you tell me where is located it because I can't find it.
Please and thank you 🙏
the ecu for the engine is located behind the glove box compartment you will need a screw driver and I believe a socked 10mm to remove it.
❤
thanks
Can you turn the music more louder I'm still hearing you!
yea, sorry about that. bad editing skills.
I have a start problem w my car where everything turns on but the engine, I’ve replaced the brake switch and the steering column lock but it still doesnt start, any ideas why?
Have u replaced the starter also. Let me know what year is your car and what type so I can help u figure out the problem
JV Fix it’s a 2008 hybrid altima and no i haven’t replaced the starter switch
Are you located in Cali by chance?
Yea iam in cali. For that issue I would start by checking the fuses. I can provide u a wiring diagram to find the correct fuse. By the way do u have knowledge of how to use a multimeter
JV Fix no i don’t know how to use one. Any way i could get you to help me fix it? I’m located in Gardena, CA
I have altima 2009 hybrid and don't star only all the lights i change de batery 12v and change pedal sensor and the colum stearing i have a code p0603
it could be the same part i changed. u need a professional scanner to confirm the problem
No AC power Voltage goes low when Idle & in twn HWY drives good AC wrk but Not In Twn. No Codes
no codes hu. have u checked the rear auxiliary battery?
@JVFIX just replaced after 8yrs..went bad but No Change
Wht mjbe does is Does not Hold Voltage when in Idle & Especially with AC on steady drop but will charge bck up when Moving Motor Engagement
I had a small accident I ran into the back of someone my car shut completely off I have 2010 Nissan hybrid the manual told me it has a shit off switch but the dealership want work on it cause they did continued
I am not getting any codes. They will just not start.
have u checked your 12v battery? is located on the trunk passenger side
jvfix Yes I went and bought a new battery charger. My other one was about 40 years old. So this new one tells me if the battery is good or not. So it came back as battery bad after charging all night.