VW B6 ALL Keys Lost Programming Via Dump on Passat 2005 -2015 By Autel XP200 & IM508 Program
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- This video explains how to make ley on VW B6 via dump on a 2005 - 2015 Passat Salon/Wagon when you've lost all keys.
You will need to locate and remove the comfort module.
Extract the Pin and CS Code from the EEPROM located in the comfort module.
Use ON/OFF switch as VAG forced ON tool, Autel IM508 and XP200 programmer to program a new key to the car.
Watch the entire video to gain valuable insights on how to program semi-smart key when you have lost all keys to your VW Passat Saloon/Wagon
If you found this video helpful, please comment, like, share and SUBSCRIBE to my channel. Remember to hit the NOTIFICATION button to be notified of new videos on automotive tips and DIY solutions. Thank you.
For Business:
Call or WhatsApp:+2348159721898
#car
#remote
#carmaintenance
#keyprogramming
#vw
#passat
#B6
#Autel
#XP200
#passatb6
#autoelectrician
#automobile
#carrepair
#howto
#locksmith
#locksmithreviews
#locksmithtips
#carrepair
#automechanic
#remote
#remotekey
#remoteprogramming
#autodiagnostics
Best video for passat akl, thank you so much! Best wishes from Sweden!
Thank, pls share and hit on the NOTIFICATION Button after subscription. Best regards from Nigeria.
Привет братан 🖐 А я из Дивного (Россиия).
Спасибо тебе за видео!👍
You are welcome
Is it possible to do that job by via dump or only in immo option
I don't quite understand your question but AKL can only be done by this procedure
Hello. Please tell me which contacts on the OBD connector need to be closed?
1 and 16
I wonder if you could use the clone key option from obd? I recently did a 2010 Jetta Akl and it worked.
Clone key for an AKL job? Which original key did you make a clone from?
@@AzarArezAutos Xhorse super chip in key shell. I’ve always used that for adding a key. I thought I would try it and it backed up the immo data and then asked which spot I wanted and bam worked.
@@Locksmith.71 yeah you can actually back up the immo data and write on an Xhorse generated 48 chip to make a blade key. But in my video this is a semi smart key not a transponder key shell. Mind you the process you used is called writing key via dump not Cloning key. Hope you understand the difference?
@@Locksmith.71 yeah you can actually back up the immo data and write on an Xhorse generated 48 chip to make a blade key. But in my video this is a semi smart key not a transponder key shell. Mind you the process you used is called writing key via dump not Cloning key. Hope you understand the difference?
@@AzarArezAutos those keys you used have a separate chip inside just like a key unless it’s oem. Also the process was clone key I used. Because it took the data from the car and wrote existing slot to the key. I’ve used write key data from dump before. That process writes a new key to a new position. Clone uses already made key. Like I said I’m not sure if it works for a comfort module. I’ll have to try when I get another one.
Привіт друже. Підскажи будь ласка, яка схема вмикання примусового запалення через порт obd2, дякую.
Pin1 et pin16
👍
Are you in Nigeria, I do the same job in Ghana
Yes. How is business in Ghana?
Business is going well bro
What's the use of making a video if you don't show how to do it you're missing pieces here brother