HOW TO PLACE DOORS in BLOCK and Jambas EASY and Fast | Tutorial for beginners like me

So Easy is to mount a door in Block at the level of individual user bought in brico depot for 99 euros complete with jambas, locks and handles. Ideal for beginners and beginners like me. There are also in leroy merlin and other DIY centers.
We recommend that you assemble your doors in a block when the rest of the work is finished (renovating, painting walls or ceilings, polishing floors, etc.). This will prevent them from being damaged.
1. The first step to install your doors in block
Check the leveling of the frame or knuckle with the help of a bubble level or measuring from corner to corner
The squaring will be correct when both diagonals have the same measurement. A = B
2. The second step, placing the fence to the frame
To do this unpack the block and desclave the ribbon that joins the stringers of the fence at the bottom.
Once the block is unpacked, we unlatched the ribbon that joins the stringers of the fence at the bottom.
Remove the blade from the block. Note the opening direction of the door.
It is recommended to fix the enclosure with screws; Replace the center bolt of each lug with one of sufficient length to secure the work frame.
Then place the fence inside the frame recess.
Attach the frame rail to the frame that houses the hinges first, using screws, wedges, staples or foam.
3. Third Step, blade placement
After fixing the hinged beam to the frame we will maintain the clearance and finish fixing the next frame rail.
Before continuing with the rest of the fence, mount the door leaf on the frame rail that you have just fixed.
Attach the head and the other side of the fence by means of headless tips (very thin nails).
Check the plumb bob for the entire assembly.
It is convenient to ensure the clearance between fence and sheet with the help of wedges, so we will keep the space so that the door will be closed properly.
4. Fourth step, flashing placement
This is the last step to set up our doors. Cut off miter gates and secure them to the fence.
Once the flashing assembly has been assembled using the special pieces supplied, attach it to the fence and fix it with foam or very fine tips.
A: Flap, frame or jamb, B: Door or door, C: Hinge or hinge, D: Plinth, E: Wall thickness, F: Fence, G: Door ceiling, H: Handle or handle, I: Thick Door
Tip: Do not use abrasive products in cleaning the block, just wipe a damp cloth with wood and metal elements.