Hello, you helped me a lot. I had a problem with my Diana red dot. The problem was an on and off dot + a loose adjusting screw. The problem were the 4 little screws below the plate. I tightened them and now my red dot is as good as new and the red dot is steady also. The contacts were clean by the way so the only problem were the screws. Thanks a lot and keep up the good work.
Thankyou this video fixed my t1 reddot sight. Although my red dot was new the board was inserted wrong so the turret numbers were incorrect when turning it and moving the electric board to the right position it worked perfectly fine compared to my other t1. R and G were now the off positions! Thanks again ❤
Had a problem with contacts intermittent switching on and green and red dot were also intermittent . Slightly different to yours as only two contacts prongs make contact that are fitted to a base of the switch with 4 screw that also adjust the switch tension. My problem was that large securing ring had become loose and the contact disc had turned and because loose any contact was erratic. Removed, cleaned and relocated contact disc and while holding it in place during fitting the outer ring it’s now fine. So Thank you 👍
Greetings from Jakarta Indonesia. Very nice repair guide and I am having the same problem as well. It is time to fix it. Thanks a lot for great video Bro!
Yes Sr…thanks for this video…it was very helpful for me….and I appreciate it…..also….you look very professional and show you have good knowledge about the red point
I personally like copies of Aimpoint T1 or Aimpoint comp M2. The quality depends on the manufacturer and luck but for me they work fine and hold zero on GBBRs.
Hello. I was given a red dot sight but with a new battery it wouldn't turn on. I stripped it down and placed the battery on the two connections and the laser works. How would i fix this type of issue?
Do you know how to fix the opposite I bought a replica eotech 558 and I strictly use Gbbr it’s on my mk18 and after 1-5 shots the reticle will shut off . It turns back on fine I’ve replaced the battery and I can’t imagine a Gbbr has enough recoil to do this even to a replica optic. Any ideas on how I can fix it so the reticle will stay on ?
Hi,still my red dot is not turnoff besides when I turn on other colors are occupied red and blue,red and green like that can you give me a suggestion to rectify the problem i have used Leopold mark 8888sc
Another nice video my friend. Thank you for the upload. They're always appreciated. I think the stupid auto correct changed your thumbnail pick to "Repaid Guide" instead of "Repair Guide". If it's supposed to say that and I'm just a complete idiot, I apologize in advance....
@@JosefMucha100 Anytime my bro. It's the least I can do for someone whos provided me with hours of free entertainment! Thanks again and keep up the nice work.
I have an issue that is the opposite, the sight won't turn on. I've changed the battery, done what I could but it still doesn't work. Is there any way I can fix this? Thanks!
I did this with my Axeon Trisyclon - Red/Green/Blue Dot Sight - it wouldn't turn off, nor would it switch colors. Works perfectly now! Thank you!
Hello, you helped me a lot. I had a problem with my Diana red dot. The problem was an on and off dot + a loose adjusting screw. The problem were the 4 little screws below the plate. I tightened them and now my red dot is as good as new and the red dot is steady also. The contacts were clean by the way so the only problem were the screws.
Thanks a lot and keep up the good work.
Yes, it helped me a lot and save me the money of buying another red dot. Thank you very much! @
Thankyou this video fixed my t1 reddot sight. Although my red dot was new the board was inserted wrong so the turret numbers were incorrect when turning it and moving the electric board to the right position it worked perfectly fine compared to my other t1. R and G were now the off positions! Thanks again ❤
Thanks, this is great to know...
My current problem is the dot turns off every time I fire. Tap the dial and it comes back on...
Had a problem with contacts intermittent switching on and green and red dot were also intermittent .
Slightly different to yours as only two contacts prongs make contact that are fitted to a base of the switch with 4 screw that also adjust the switch tension.
My problem was that large securing ring had become loose and the contact disc had turned and because loose any contact was erratic.
Removed, cleaned and relocated contact disc and while holding it in place during fitting the outer ring it’s now fine. So Thank you 👍
Greetings from Jakarta Indonesia. Very nice repair guide and I am having the same problem as well. It is time to fix it. Thanks a lot for great video Bro!
thanks! you're welcome! :)
Thanks You It really work my Ten Point Scope is fixed it was driving me crazy . THANK YOU.
Thank you for sharing this information! 🤘
I appreciate it. I’ve been wanting to do this for a couple months
What screw did you use? Can i use an allen wrench?
Yes Sr…thanks for this video…it was very helpful for me….and I appreciate it…..also….you look very professional and show you have good knowledge about the red point
thanks, glad it helped :)
Hi can you please tell me what are good red dot are out there, there is so many I just don't know what to go for thanks
I personally like copies of Aimpoint T1 or Aimpoint comp M2. The quality depends on the manufacturer and luck but for me they work fine and hold zero on GBBRs.
Hi Josef, thanks for this video. My problem with my red dot is the dial is kinda loose. I fixed it with your help :D
glad it helped ;)
I had the same problem on my gamo ad 70 and i solved it with your help... Thank you and you got yourself a subsriber...
Hello. I was given a red dot sight but with a new battery it wouldn't turn on. I stripped it down and placed the battery on the two connections and the laser works. How would i fix this type of issue?
My red dot for up and down zeroing is not working . Please help
How about red dot knob will not easily turn?
Do you know how to fix the opposite I bought a replica eotech 558 and I strictly use Gbbr it’s on my mk18 and after 1-5 shots the reticle will shut off . It turns back on fine I’ve replaced the battery and I can’t imagine a Gbbr has enough recoil to do this even to a replica optic. Any ideas on how I can fix it so the reticle will stay on ?
4yrs later, still same design prevails 👍😎✊
What if it wont cut onn
Thanks man! My friend forgot to turn his off😂
Thank you so much man !!
You're welcome!
Hi,still my red dot is not turnoff besides when I turn on other colors are occupied red and blue,red and green like that can you give me a suggestion to rectify the problem i have used Leopold mark 8888sc
Josef are you Polish guy?
Nope, czech.
Thanks you are a great help
Hope you can help. My red dot comes on only in between the dial numbers. Shoot a couple of times recoil shuts it off. Any idea what’s going on?
not sure what's wrong with it. If the video won't help, maybe it's time to buy a new one.
Another nice video my friend. Thank you for the upload. They're always appreciated.
I think the stupid auto correct changed your thumbnail pick to "Repaid Guide" instead of "Repair Guide".
If it's supposed to say that and I'm just a complete idiot, I apologize in advance....
Thanks for the comment and heads up with the thumbnail. It should be "repair". Corrected! I appreciate it!
@@JosefMucha100 Anytime my bro. It's the least I can do for someone whos provided me with hours of free entertainment!
Thanks again and keep up the nice work.
I have an issue that is the opposite, the sight won't turn on. I've changed the battery, done what I could but it still doesn't work. Is there any way I can fix this? Thanks!
Did you end up finding an answer?