Helmet Visor tint
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Tint your Helmet Visor under $10.
Music - Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music released by Argofox • A Himitsu - Adventures...
Music provided by Audio Library • Adventures - A Himitsu...
One tip or two. The finger you get is because of the curved screen. Try not to squeeze out the water by going over the fingers, instead push water out from point and outwards. Can cause creases otherwise.
As an old window tinter I would definitely try to shrink the film (when it is on the pinlock/screen) with caution to make film fit to the curve.
I know this is an
old video but it sounds like a bunch of haters up here nice work man. 👍🏿 A pin lock can be cleaned with lukewarm saopy water and a soft moist cloth allowing it to dry and tinting the pin lock isn’t such a bad idea if you mess it up just buy another one or have a couple on hand to switch them out.
or just pay $10 for a tinted pin lock
A "visor" is a bill that juts out, the "shield" is what is what is being tinted ...very common misunderstanding. Ibought a Bell MX-9 for instance that has both a visor and a flip up face shield
Great idea actually. I just bought a Shoei RF-1400 and the dark smoke shield is out of stock. I was thinking about getting another clear shield and having a tint shop take care of it for me but doing the pin lock makes sense as well and they are not as pricey
You can buy a photochromatic shield specifically for the rf-1400....it's not cheap though.
@@Jazzbone33 … those are nice but I snagged a dark tint shield shortly after this post. It’s as awesome as the helmet itself
Awesome dude. This is what I was looking for
Hell yeah brother
Thank you so much was thinking about doing this and said let me see if someone done did it and you done did it already thanks again great tutorial .
That's not a visor bro it's called pinlock
Thats not a Pinlock bro, its caled Anti Fog Lens..
**Pinlock is a Brand.😁✌
LOL
That's not a Anti fog lens bro.its called sun controll😂
freddy malsawmtluanga sun control? 🤣
That’s not sun control it’s a window
Just like tinting a car glass. Nice! Ty
works well on flat visors, but curved visors no. (use dye in water for curved visors)
nice one idol!!...good job👍
new friend here!! ..full support..
sana matapik mo din ang garahe ko...ride safe🙏.
The tint paper from ?
You're really not supposed to spray down pinlocks. It decreases their lifespan a ton.
source? trust me bro lmao where do you guys come up with this
Can you do the same on an astronaut helmet with one way adhesive???
Is the tint material the same as the one we use for car windows?
Yes
@@TheKolen2434 thinner tint is better to use than car tint too thick
Really helpful
How to ruin a pinlock. OMFG you are destroying it !!
Were did u get the runt paper from and does that one can you see your eye through it like ur face ?
I’ve tried this about six times and can’t get it right when I bend it to put it on I get air bubbles and can’t get them out, what’s the trick
heat
Well done thank you
Not visor thats pinlock
What about all those fingers ?
what is that insertable piece in your visor?
Anti-fog "pinlock" insert.
Helmet PINLOCK INSERT tint!! And what a shit video. Why didn’t it stick around the edges? and what did you do to rectify it?
Wt about visibility in night?
not good. but his has tabs holding it in, he can just take it off and have a clear visor
what soapy water spray did you use on this?
the dish soap + water kind
the soap & water kind
@@fatbongripz4207 sometimes I cant even believe we are of the same species
how has the tint held up after a year? 👍
Bump
Does the pinlock still perform well after tinting it?
No, it doesn’t.
I tried it and I regret it. lol
Did anybody thought about half tinting visor or less then half ? Which gradient window tint film..
does the pinlock still work to remove the fog?
Yes it does..
Well, that pinlock is useless now.
he changed the use. Its actually a good idea as a pinlock can be tossed into a backpack for a night ride
What's that bubbly thing?
Can't I just Clean the visor and then Stick the film using a Heat gun??
Or is it necessary to use whatever that bubbly solution is.
Its soapy water. Simply add some hand wash liquid to some water. I never tried a heat gun. But it may work too.
@@maliscam9382 Fingers ?
@@derrikecopefan5337 heat gun
👍👍👍👍
Aku soh kedai kete tolong tintedkn visor aku.. hmm dorang punya pembohong ( malas nak layan) kata tak boleh kalau buat takkan jadi... Padahal boleh je.. aku bayar kot bukan percuma puii!!
What does the soapy water do?
First when he used the soapy water is to clean the visor from any dirt so that the vinyl will stick perfectly and the other part when he used it on the vinyl itself is to lubricate the surface for better removal of the air bubbles.
@@yahavmalka9222 and to keep it from being too tacky too fast then when you get it in place where you want you can use heat to get rid of the water & bring back the tackiness
Where did you get the tinted material is what I want to know
Its from the local shop. you can buy it from ebay too.
Oi, the video was released of my birthday! XD
I see a few small air bubbles at the end lol
Dude, that was horrible. Everything about this video is wrong.
What is "Sopy water"? I can't believe you actually rubbed the pinlock with the silkscreen part of a t shirt. I'm surprised it didn't scratch the sh!# out of it. Maybe it did, we just can't see it in the vid.
It's not that fucking easy
lol
Disgusting video. There's no detail. What are the materials, where can we get this, etc.