How to make photo frames
ฝัง
- เผยแพร่เมื่อ 27 พ.ย. 2016
- I made these three frames from reclaimed hardwood and gave each one a different feature: timber inlay, splined mitres and face dowels
Affiliate link for the Dowelmax doweling jig: www.dowelmax.com/?aff=3
My email: duww@bigpond.com
T-shirts: duww.threadless.com
Stickers: www.redbubble.com/people/DUWW
Instagram: / downunderwoodworks - แนวปฏิบัติและการใช้ชีวิต
I spent 50 years, so far as a picture framer. Your mitre sled is the only one I’ve seen exactly like my Dad’s ( which we used for about 10 years )in our shop and I’ve never been able to close the gap in the front of ALL THE FRAMES I’ve cut since then. It depends on who’s cutting and on high priced the saw is. Yours works the best! You seemed to be cutting face down. We’ve always had great results on face up; less splintering in the gold & silver leaf. I’ve been looking for just one person with a sled like I literally grew up on ( since I was cutting at 15 years old ). Gosh, this is refreshing! Jamie Lavin Gardner, Kansas USA
Hey Jamie, thanks for the great comment. So glad i could reignite those childhood memories
Excellent work, love the routered biscuit cuts, the instant feather board and the quick spline jig, but my faves have to be 2 of the absolutely most epic eyebrows ever! Those beauts deserve their own channel!
Thanks Mike, glad you liked it.
This is the most useful TH-cam video I ever watched. Thank-you for sharing !!!
Thank you very much for the compliment Kelly.
Very helpful, insightful and informative. Appreciate all of the film editing you put into your video so that things were explained and given detail as to what was happening and why.
Thanks very much Jonathan, glad you liked it.
Just happened to stop by and I thank you for the simple way to calculate the measurements required to make a frame. I found the video to be informative and easy to follow along.
Thank you from me over here in the UK.
You are so welcome Chas, glad it was helpful
You Are the Man bro simple clear and straight to the point, many thanks for sharing
.
Brilliant Work on those Frames and some great ideas to jazz them up a bit. Well Done.
Barry (ENG)
Thanks very much Barry.
Great video, thanks. I liked your mitre sled, very practical and accurate design. The inlays look really nice, simple and very effective, stylish. Nice job!
Thank you very much.
This was one of the most artistic and get technically informative videos I've seen on frames. Absolutely loved watching it. Great work. New subscriber here.
Thanks very much for the feedback Andy and for the sub. Cheers mate.
I'm glad to see someone who knows what they're doing also gets their band clamp flying off as they tighten it ... gets right on my wick that.
yeah mate, its happens to all of us. some choose not to show that kind of stuff. Cheers
You are realy an artist who is uplifting the aesthetics of manual work. Thank you again. Your friend from Greece
Thank you so much Axiothea.
Great look to those frames. Nice method and great jig!
Thanks, glad you like them. cheers.
I am just learning to make frames and panels now. This was a fantastic video showing different ideas. I really like how easy you make it look. Thank you
Thank you Michael. Glad it was helpful and good luck with your woodworking
A lovely gift for your boys, something for them to treasure for a long time.
Thanks very much and I hope they do.
Nice work. The inlay one looks really nice.
Wont be buying any more frames, will be making my own after watching this video.
That's the way mate, much better making your own. Thanks.
Oh mate, practically salivating over the wood. I've made quite a few myself while living in Sydney, and sure as hell miss the Oz hardwood. Great vid!!!
Thanks Peter. Yep, you can't beat old reclaimed aussie hardwood
...and another fine video with an outstanding product(s) at the end.
Thank you.
Good job on this one, I definitely learned something in my struggle to learn how to make picture frames.
Thank you John, I’m very glad it was helpful
Great job as always. Damn fine looking frames.
Thanks very much Brent.
Thanks from the UK! Great build. New subscriber!
Thank you and welcome Richard.
Just came across your channel. Great video and beautiful picture frames. They all turned out great and I learned a little something new from watching you. Thanks for sharing!
Thank you very much for your comment. Apologies for the late reply but I'm trying to clear my "Comments I haven't responded to" list.
Lovely craftsmanship.Many thanks for sharing.
.
Just found this video. Loved it. So clear and precise. Now I just need to go buy a table saw, jointer, band saw and thicknesser. 😀
Thanks very much Chris. Thats a nice wish list mate.
Great Videos ! I do a lot of reclaimed lumber frames for old paintings and advertising mirrors Thanks for the tips .
No problem David, glad it was helpful.
Top notch frames! Thanks for sharing.
No worries, thank you Sid.
awesome frames... glad I found your page.. keep up the great work..I also date all my projects....hello from Gresham Oregon
Thanks very much and welcome to the channel.
I was looking for a video like that to know how make a picture frame. Thanks a lot
No problem, glad to be able to help and inspire.
Great job, easy to follow institution and amazing result. liked it :)
Thank you Moosa.
Simplistic, yet artistic! Great job. New subscriber.
Thank you very much Steve, and welcome mate.
Great job, excellent explanation. Mate you got a new subscriber from UK.
Thank you very much Tony and welcome.
This helped me a lot in measuring and cutting to length. liked the video and subscribed.
No worries Joe and thanks for the sub.
Really nice. The inlay looked especially good.
Thanks Bill, that was my favourite.
Beautiful as always! I wish I could reclaim such nice looking wood from somewhere ! :)
Thanks very Csaba.
Beautiful job ..... enjoyed watching.
Thanks very much Doctor.
Thanks for the excellent video. Fantastic for a beginner like me. I need to do a frame for a large mirror. I was thinking of the spline technique for the joints.
No worries Dave, good luck with it mate.
Great video and great info. Thanks from Florida!
No problem Daniel, glad you enjoyed it!
The frames looks pretty good. Good Job. Subscribed
Thank you, twice. Much appreciated.
How have you only got only 11K subscribers!!!! Excellent work by the way, up there with the best mate. Best of luck with your channel and keep up the good work.
Thanks very much mate. I'm not one to blow my own whistle but when I read all the great feedback I get and see some other channels with lots more subscribers, I can only scratch my head and wonder why.
Very nicely done I appreciate you sharing your techniques. Funny thing I came here for picture frame making techniques but that white board idea is a great one 👍🏻 I know my wife has a couple nice size frames sitting around that will work out well for this. Like others have commented I was cringing a couple times while you were using the table saw 😬. Not preaching just showing concern for fellow woodworkers. Stay safe and happy woodworking to you.
Thanks very much Dave. Good to hear you picked up an extra tip from the video.
They came out pretty nice indeed !
Thanks very much.
Once again very nicely done, they look really good and fantastic xmas pressies mate. I think a future project for me as well. You inspire me mate :-)
Thanks very much Les. Something different this year from t-shirts or movie tickets.
very nice inlay , so happy to be born on the metric side of the world
Haha, thanks very much
Nicely done Mate! Looks really nice! Cheers!
Thanks very much Kevin.
Nice one and clever tip for the whiteboard :)
Thank you Mark.
Watching one of your other videos you mentioned making due with what you have. Here I have seen your feather board and biscuit cutter 🙂
Thanks Ron. Those 'featherboard' sticks work really well and everyone will have a set🙂
Beautifully done...Learned a lot..
Thanks Raj, glad to hear it.
Very well done. I damn love it.
Thank you.
Good job and good ideas. Thanks mate.
No problem 👍. Thanks Leonard
Love the two fingered featherboard...good stuff. Nice designs well done. 'Bonza' as you say in Australia.
Thanks very much, glad you liked them
Yeah same here, what a great idea!
Gracias por enseñar sus secretos y técnicas de trabajo, es una gran persona.
Mi placer. Gracias por tu maravilloso comentario (google translate)
great explanation, great work. bravo
Thank you very much Volkan.
Nicely done!
Thanks Greg.
SO good!
Thank you very much Andrew
Another nice video. Loved the end result. Great thinking with the quick-made spline jig, it worked just fine. Thank you for sharing.
Thanks very much mate.
Beautiful!!!
Thank you Betina.
PROFESSIONAL WORK
Thank you very much Horvath.
If you are not an expert the narration helps….If you are an expert no need to watch …you can make your own….I really enjoy it and learn as I am no expert!!!
Hi Marc, thanks very much. Happy that you get something out of watching. Cheers mate.
Very nice frames.
I have never tried biscuits but I will now.
They can make life easy for a woodworker, Steve. Enjoy.
beautiful job!
Thank you.
Great job - BUT - your sawing skills give me the chills... I actually paused the film to count your fingers.....
No need Allan, still got ten. Thanks mate
Great video, nice work
Thanks Geoff.
good stuff mate enjoy your videos.
Thanks for the support and your time Harry.
Nice frames brother and I liked your version of a feather board lol
Thanks very much Jason.
Love the frames. It’s funny, I just found your account a couple days ago but I made a frame almost exactly like this a couple years ago too...also for a Christmas gift, haha! I’ll tag you over at Instagram so you can see 👍🏻
Thats cool Seth, thanks mate
Great work, just simple inlay techniques that make a dramatic difference.
I've seen other comment and I have to agree, it bothers me when you don't use a push stick.
Nice touch with the pictures for your Son's, that's Dad's time in the shed but family in mind.
Thank you very much Mike. I recently made a cool push stick for the splash back build that i quite like using. Thanks for the concern.
Brother your bench saw health and safety technics leave a lot to be desired, amazing still have all your digits!
Thank you very much for your comment. Apologies for the late reply but I'm trying to clear my "Comments I haven't responded to" list.
@@DownUnderWoodWorks OK so this is an automated reply
Nice one. They look really sharp. If you add an old ruler to each inside edge of your mitre jig you won't need to do any math, since it will be measuring the inside diameter of the material (for your photo) and cutting 45°s to the outside edge. Just make sure to substract how many millimeters you've made your rabbit from that dimension.
Thanks for the tip Ryan. Cheers mate.
Great video!
Thanks Pete, glad you enjoyed it
Beautiful
Thanks very much 👍🏼
wow nice, awesome job i am a photographer and want to get started in making my own frames....
Its good to be able to frame your own prints Matt, its a great finishing touch.
excelente video te felicito desde México mi amigo
Thank you Rubens and g'day from Australia.
Nice job.
Thank you very much.
Well done
Thanks Chris
Good Morning from Greece. Keep Walking . . .
G'day from Sydney Australia
I like the way you cut the biscuit with the router, so the little blade is from or what is it, and its attached to???
Hi Lynard, its a biscuit cutter router bit. Should be readily available from your favourite supplier
Great job. Can you go into some detail about the glass/ backing board stage? You kinda just wizzed through it. Where do you get the glass? Cheers
Thanks mate. I get my glass from a regular glass supplier. I have a few in my local area. Its 2mm thick. The matt board I buy from a picture framing business also near me. The matt board is probably the more difficult to get because you have yo find a framing shop or business that will cut it and sell it on its own. if you do a lot of picture framing you can buy your own matt board and a specialty matt board cutting tool/kit.
Muy entretenido y facil.....
Thank you
Is that green router bit at around 9:50 a biscuit slot bit? Love your videos, makes me miss Australia.
Yep, it sure is. I've used one for quite a while now. Cheers.
like the one with the pin striping
Thanks Dave, thats my favourite too.
Pure class I envy you what was the router bits you used, thanks
Thanks for the kind words George. The router bits I used were a 4mm 'Slot cutter' bit for the biscuits and a 5mm 'round over' bit for the edges. If you Google them you will see where to buy them in your area. Cheers mate.
love the picture frames😊 What type of wood is it?
Thanks. Im not too sure but it may be tassie oak. Either way its a reclaimed old Aussie hardwood
Nice video and interesting techniques. How is it you still have all your fingers?
Thanks Robert. Its down to skill and respect for the tools
Very nice. I’ve never used a sled on a table saw. I always use a chop-saw. What advantages does the sled offer?
A much cleaner cut and if cut and used at the same time both of those pieces that slide up from side to side on the sled can be glued together and get a beautiful 45° glue up
Thank you very much for your comment Kevin. Apologies for the late reply but I'm trying to clear my "Comments I haven't responded to" list.
Hello, Great Video! I love how the frames turned out. My question. I saw you use biscuits for the miters. You then added splines. Were the splines just for looks, or did you add them for additional support to the frame? DD
Hi Dennis, thanks very much. The splines in this case were for looks only. I usually use biscuits for alignment purposes but they do give extra strength just as splines would. Cheers mate.
dumb question, where do you measure from for the inside dimensions and what should they be?
Sorry Mathew, do you mean the inside measurement of the frame or the rebate for the glass?
thanks
No worries Theo, cheers mate.
The rubber thing that you used to clamp the frame what is the name of it.
I think its called a band clamp or strap clamp
has that thicknesser got dust extraction?
It didn't in this video but it does now. th-cam.com/video/rljJYo9d94g/w-d-xo.html
Hi whats that router bit you used for the biscuits slot's
Its called a slot cutter bit
@@DownUnderWoodWorks thank you
So where you get that 577 from
That was the width of the glass i was using
What spray gun did you use?
Hi John, its a Wagner Electric sprayer. www.wagneraustralia.com.au/catalogue/diy/sprayers/fine-sprayers/w550-finesprayer#/overview
Lovely result, but you scare me to death with how close your fingers get to the blade. I’m wondering how long you keep all 10.
Forever Brian. Thanks mate
Rabbet!! :)
...or is it 'Rebate'? :-)
DownUnderWoodWorks
Mike Regan
Yes?
What is the type of tree?
I'm not sure of the species, its a reclaimed Australian hardwood
Ganz tolles Video. Super 👍👍👍Ideen und Anregungen. Warum bist du kein deutscher 😂😂 mein Englisch ist so schlecht .🙈
Thank you Joachim. The language is no problem mate, we have Google Translate. 😂 Vielen Dank, Joachim. Die Sprache ist kein Problem, wir haben Google Translate
Hi Mate, Would be most grateful if you could increase the volume on your videos. I've everything full on yet still find the volume too low. Excellent content. regards from Rockingham. WA. Terry
Thanks for the feedback Terry. Audio is something I've been struggling with, I'm not a videographer or audio expert at all. I think my latest videos have been better (I hope). Cheers mate.
What is the machine at 12:50 called?
That was my homemade router table. I recently built a new router table. th-cam.com/video/Ct4XMmfdqME/w-d-xo.html
Please use push sticks... you only have one set of fingers.
I do. Thanks for your concern mate.
I do not understand the use of these small pins on the connecting strips, what ???
Hi, I did mention in the video that the pins are just for looks. They serve no purpose other than as a feature.
Is crocodile Dundee your neighbour?.
Haha, why do you say that? is it the accent?
@@DownUnderWoodWorks Yes