dude you have all the little quirky videos I've been looking for that nobody else has, please keep it coming, you seem to know all the little tips and tricks, and in's and out's everyone who's looking to go the extra mile is looking for. BZ.
Great video. Wish I had seen this before buying the wrong TLR7 Sub and having it fall off the gun at the range. I have now returned it and bought the right one. Thanks for the video; now I will know how to install. I will most likely go with the #4 to get it on there.
I am so glad I’m not the only Ahole to first buy and P365XL then a XMacro and have this problem with the TLR7 sub. Thank you and thank you to tactical development.
I ordered this before I received my stream light tlr 7sub to realize this is not needed and the #5 insert that comes with the streamlight works perfect.
I have a TLR7 SUB SIG that I bought when I got my 365XL, it fit fine with no issues. While I was searching for holsters I bought the Icarus EVO Frame and ordered a holster from Shapeshifter Concealment as he makes them specific for that setup. Well when I got the holster it was super hard to holster and really hard to draw. Well I reached out and Brad, the owner immediately told me that I need the 1913 TLR7 SUB as the Sig model is not setup for that. He said to contact Streamlight and ask for the 1913 adapter parts and they should send them out. Well they did, free of charge and once I swapped them out, the holster fits perfect. Streamlight was aware of the issue and they did this as a one off for me. Oh and if you or anyone out there is running a 1913 rail I used the #4 key. Hope this helps
How do you switch the clamps? Can't seem to find a video and there's a bunch of tiny parts in the baggie Streamlight sent me that idk what to do with lol...
@@ldope3904 yeah I just carefully took it apart and made note of the way the parts go back together. Take your time, it’s not too hard just make sure to remember how the parts go. Take a couple pictures too for reference. Good luck
I read on a forum that you could swap them to the 1913 so I did the same, I contacted streamlight received the parts and mounted it up to my Icarus grip module.
I just took one of the included adapter plates with the TLR-7A and removed a bit of material until it fit flush against the trigger guard. Easy to do. Just sneak up on it.
So I used the original inserts for the sub on the macro and there is no play at all. I ordered the suggested insert and it was not needed. Also I do not like having the buttons past the trigger guard. I use my forward grip, left thumb, to press the light switch. So having it too far back doesn’t work well for me.
does anybody know where i can find the 1913 rail pieces for the tlr7 sub? mine came with the sig rails and the key that came with it doesn’t align with my rails
I tried to put the flashlight and the insert on my x macro and it's still offset it won't tighten down without those little tiny metal things that wrap around the spring popping out.its slanted and idk what else to do.no trouble when i had a glock but idk why streamlight wernt smart enough to fix this
I found one that fit tight and put them at the right spot for me. There are 2 that are tight and 2 that are thin for u to slide it. If u tighten the rail it's not supposed to move. Or u can use something to build up the key. Just some options for us poor guys that don't want to spend the 12. But again I found one that put the button in the perfect spot.
i was able to fit my TLR-7 sub from my p365xl. pls tell me I dont have to purchase another TLR7 sub... I already ordered a holster for my macro.(TLR7 sub holster)
@@gearrunnerI just put my comp X macro on a Wilson combat Xl and was looking for the best light option. I had the Tlr7a on the standard X macro module but since I don’t have the 1913 rail I’m in search of a good new light and holster😓
There was a booklet of instructions with a small piece of paper inserted that listed which of the supplied set of keys fit which pistol. Put in the key for your model and you are good to go...
This pistol was not made yet when they produced the lights. No key fit the pic rail on this pistol correctly. That is why the company made this one specifically for the X Macro.
The biggest difference is the footprint is a little smaller on the Sub. Both have the same lumens and use the same battery. What it comes down to is what company holster you want to use and what they offer that fits what light. The holster I wanted to use they offered one for the sub so I bought a sub.
Man please help. I want a laser light combo can I use the tlr8a on my x macro ? Or does it have to be one that says 1913 on the side . Please let me know
@@alejandraluian6671 No I haven’t really begun to search yet. I have a Tenicor Certum3 that works great without the light though. Let me know if you find one and I’ll do the same!
That in Pigeon Forge I believe it looks like the road that runs parallel to The Main Road. Then you said Buds Gun Store so your in Sevier County I bet if not where I said.
Thanks man. What holster are you using with that setup? A lot of holster makers are molding their holsters with key number 5. I wonder how far off the Tac dev key is compared to the #5 key.
@@gearrunner I ended up trying it and it fits on my wilson combat p320 x compact. It came with the rail key that fit correctly. Not sure if they updated the mounting inserts, but it worked for me.
@@_elchief.exe_ sorry I can not, you will have to Google it. If I put a link for it TH-cam will give me a strike and possibly take down my channel for linking gun parts.
I just ordered this light , the tactical dev part. But I also have a holster ordered from anr that's for this gun and light. Will this tactical dev part effect the way the gun fits the holster ?
I wish I watched this before purchasing the sub for my macro with the Trex holster. To my surprise after waiting several months and already purchasing the holster light and red dot I had the Ah-oh moment realizing the sub doesn’t not fit. My fault I assumed the TLR and A holsters would work with the sub…..nope
I just finished building a Macro, now I am waiting for The TLR-8 Sub G which has the Green Laser plus 1000 Lumens. It was $238.00 I am going to put a Romeo Zero Optics. This one has a Wilson Combat Green Grip Module, Wilson Combat just released a week ago. I ordered a Blackhawk IWB Appendix Carry, then I Carry in a Chest Rig with a Regular 365 but that Also has the Wilson Grip Module. I did this because of the 17- Plus Mags, also installed the Sig brand Flared Mag Well. I grew up in K-Town in Marble city. Our Church and Cemetery is Headricks Chapel. My Cousin Has the Old Property there in the valley called Abbott’s. Hollar, My Step Pap paw Was a Cotter and he and my Grandmother Lived back in Cotters Hollow until she gave him a Ultimatum to Either Quit Making Liquor or She was Leaving him and moving back to Knoxville. My family names are Abbott, Godfrey, Hembree, Brewer, Brickey. From Both my Papaw and Grand Mother side. All my Family are Primitive Baptist. I live in Michigan now, I met my Soul mate (39) Years ago while up here. But we come back and forth to Knoxville, I lost my Youngest Brother a Year ago, he live over by Crossville. My Oldest Brother Lives in Sparta, Tennessee. If I am correct about the Street it is the Road that runs from 321 behinds everything on the West side of Pigeon Forge. Your carport along with those houses look exactly like the ones on that Road. I could be wrong UTV I am close if not on point. Lolll weird isnt it. But That’s What I do now. I retired from a Retirement here in Michigan after 23 Years. So when my wife’s is ready to stop working then we are going toTravel for a spell then probably move Down There over around Powell area.
Where can i order the insert block? I bought the TLR7 Sub for my p365 x macro but it didnt come with the bar? Is there any place i can get it or should i just bring it back to the store i got it from?
@@gearrunner makes sense! I ended up finding the opposite in my search. I could only find reputable companies with the tlr7a for the X macro. Iwould ask which holsters you went with, but I’m assuming that’s the upcoming video you referenced! Always enjoy your content, keep it coming!
I have my macro was going to order the trl7 1913. Just hadn’t found the right holster yet, I’d be interested for any suggestions. I usually use las concealment, I recently tried werkz, I’m always open for suggestion
Luckily for the x macro I used #5 and it fits just as close, I had to tighten it with flathead. No play or anything. Had to switch the right button to the low push button to have my trigger finger not hit it.
As a lifelong Surefire customer I bought the TLR 7 sub… Light is easily discharges negligently, Thumb screw broke trying to get the wiggle out Chinese made affordable option that as you see here needs altering
My brother and I watched your video and when i saw your background and heard your accent I thought you lived near my grandparents in Tennessee where i have some family. THEN you said you live in Tennessee so my brother and I’s mind was blown. I live in Memphis(shit-hole) but like i said previously i have family in Tennessee (Union City/ Troy). I understand for privacy reasons for you not to tell me where exactly you live but i gotta know am i close?
The tlr 7a fits this gun well with the #3 1913 key for me honestly. I went with the 7a because the holster companies I use made them with the A and not the sub.
Bingo. I just bought both to see which I liked better. The #3 fits perfectly and I find the sub just doesn’t feel and look to fit as good in any way compared to the 7a
@@jaime7166 I have a sidecar with a tourniquet attachment, and a JX tactical holster with an Ulti clip. I had to modify that one. Remove a lot of material and add a concealment wing to it so I wouldn’t suggest that one
Yea, I have several of those and they do not fit the X Macro. The X Macro has a picatinny rail and the normal P365 doesn’t even have slots under the dust cover. You should probably do some research before you comment.
Yeah we tried the stamps and they get torn out, but we did find a cheaper shipping recently so it’s closer to $4 to ship…
dude you have all the little quirky videos I've been looking for that nobody else has, please keep it coming, you seem to know all the little tips and tricks, and in's and out's everyone who's looking to go the extra mile is looking for. BZ.
Thank you, I’ll definitely try to keep finding these little tips and tricks and keep posting them. Thank you for watching.
@@gearrunner just ordered that little tlr7 adapter. loved your first 365 regular videos. keep it up hoss.
Rec Mod ~ Gear Runner Is Awesome!😎 Flad You found his channel🤩
Just picked up an x macro and tlr 7 sub and this is just what I needed. Thank you!
You are very welcome, thank you for watching
@@gearrunner where the link To it ?
@@caliimadekidd per TH-cam rules I can not post links to gun parts
@@gearrunner can you send it by a text message?
Great video. Wish I had seen this before buying the wrong TLR7 Sub and having it fall off the gun at the range. I have now returned it and bought the right one. Thanks for the video; now I will know how to install. I will most likely go with the #4 to get it on there.
You are very welcome, thank you for watching
Thank you so much for this information. Saves everyone aggravation after they buy the light . Well done Sir
@@maxander9010 you are welcome, and thank you for watching
I am so glad I’m not the only Ahole to first buy and P365XL then a XMacro and have this problem with the TLR7 sub. Thank you and thank you to tactical development.
The light and green Lazer combo I run on my macro comp is Olight mini Baldr
if you buy the sig light by mistake you can still use it on the 1913..just crank it down tighter it will stay
Well done. The play w/the original insert would drive me nuts, too.
Yea, I would always be thinking about it. It’s my OCD
I ordered this before I received my stream light tlr 7sub to realize this is not needed and the #5 insert that comes with the streamlight works perfect.
Yep. I tried them all and that one fits perfect and no play. Save your 15bucks
I have a TLR7 SUB SIG that I bought when I got my 365XL, it fit fine with no issues. While I was searching for holsters I bought the Icarus EVO Frame and ordered a holster from Shapeshifter Concealment as he makes them specific for that setup. Well when I got the holster it was super hard to holster and really hard to draw. Well I reached out and Brad, the owner immediately told me that I need the 1913 TLR7 SUB as the Sig model is not setup for that. He said to contact Streamlight and ask for the 1913 adapter parts and they should send them out. Well they did, free of charge and once I swapped them out, the holster fits perfect. Streamlight was aware of the issue and they did this as a one off for me. Oh and if you or anyone out there is running a 1913 rail I used the #4 key. Hope this helps
How do you switch the clamps? Can't seem to find a video and there's a bunch of tiny parts in the baggie Streamlight sent me that idk what to do with lol...
@@ldope3904 yeah I just carefully took it apart and made note of the way the parts go back together. Take your time, it’s not too hard just make sure to remember how the parts go. Take a couple pictures too for reference. Good luck
Do you have a link to that holster?
I read on a forum that you could swap them to the 1913 so I did the same, I contacted streamlight received the parts and mounted it up to my Icarus grip module.
I just took one of the included adapter plates with the TLR-7A and removed a bit of material until it fit flush against the trigger guard. Easy to do. Just sneak up on it.
Thank you sir! I just picked up the same exact setup and I'm waiting for my light to arrive, I'm going to get this ordered now.
Where’s the link to it?
Now I just need to know what holster you chose for this exact setup!
I used #4 and when you tighten screw down its fine
Great info as usual. I recently purchased an Aiwb from Bucks holsters that was made for the macro with the sub. Great holster.
So I used the original inserts for the sub on the macro and there is no play at all. I ordered the suggested insert and it was not needed. Also I do not like having the buttons past the trigger guard. I use my forward grip, left thumb, to press the light switch. So having it too far back doesn’t work well for me.
Thank you Andy for the information. Have a good weekend sir. 👍
You are very welcome Jack, good to hear from you. Hope all is well and have a great weekend as well.
does anybody know where i can find the 1913 rail pieces for the tlr7 sub? mine came with the sig rails and the key that came with it doesn’t align with my rails
You may be able to call Streamlight but I’m not sure they interchange like that.
I tried to put the flashlight and the insert on my x macro and it's still offset it won't tighten down without those little tiny metal things that wrap around the spring popping out.its slanted and idk what else to do.no trouble when i had a glock but idk why streamlight wernt smart enough to fix this
Dude, thanks! I was getting ready to send the light back before I looked in the box!
You are very welcome
I have the tlr7A for my xmacro and I used the universal key2 fits perfect no gap or anything.
Wonder if this company makes a similar block for the TLR1-HL I noticed a bit of a gap between the back of the light and the trigger guard of my P320.
Fantastic video. A huge help to me because I have decided for the first time to place a light on my EDC.
it looks like the TacDev insert and the #4 insert seat it in the same position without the play....
Super helpful. Thanks Bubba!
@@M-x3P0 You are very welcome, thank you for watching
What's the point if when tightened, it will have no play.
I found one that fit tight and put them at the right spot for me. There are 2 that are tight and 2 that are thin for u to slide it. If u tighten the rail it's not supposed to move. Or u can use something to build up the key. Just some options for us poor guys that don't want to spend the 12. But again I found one that put the button in the perfect spot.
Wow, thank you volunteer :) I have the same setup and ordering mine right now. Most thanks for this Video. Roll tide :)
You are very welcome, definitely not a TN fan lol. Thank you for watching
i was able to fit my TLR-7 sub from my p365xl. pls tell me I dont have to purchase another TLR7 sub... I already ordered a holster for my macro.(TLR7 sub holster)
You will, the p365xl light doesn’t have the crossbar like the macro uses.
A year later.. What’s your honest opinion on the tlr7 sub?
I have a lot of these lights. It’s my go to light for edc on most pistols
@@gearrunner😮 thanks for the response boss😅 keep grinding🫡
@@gearrunnerI just put my comp X macro on a Wilson combat Xl and was looking for the best light option. I had the Tlr7a on the standard X macro module but since I don’t have the 1913 rail I’m in search of a good new light and holster😓
What’s up gator bait, I had to go with the tlr7a on my macro due to holster selection at trex arms not offering the sub light series holster model
I had a 7a on mine to begin with but found out that QVO was coming out with a holster for the sub
Why does everyone want the 7 sub over the 7a?
What’s the difference between the tlr7a and sub? Are they same dimensions just different mounting options?
There was a booklet of instructions with a small piece of paper inserted that listed which of the supplied set of keys fit which pistol. Put in the key for your model and you are good to go...
This pistol was not made yet when they produced the lights. No key fit the pic rail on this pistol correctly. That is why the company made this one specifically for the X Macro.
What’s the difference between the a and the sub I have the x macro and don’t know what light to purchase
The biggest difference is the footprint is a little smaller on the Sub. Both have the same lumens and use the same battery. What it comes down to is what company holster you want to use and what they offer that fits what light. The holster I wanted to use they offered one for the sub so I bought a sub.
Where does the spring sit ? Thanks
Had the same issue with my stacatto c and c2 so really interested in this vid! Thanks.
You are very welcome, thank you for watching
Man please help. I want a laser light combo can I use the tlr8a on my x macro ? Or does it have to be one that says 1913 on the side . Please let me know
I took a #4 from a tlr7a and trimmed it to fit the footprint of the sub and it's nice and snug and sits perfectly on the Macro
That was a good idea
I’m confused….streamlight makes one for the SIG but instead you want to order the 1913 for the SIG? Is that because the 1913 fits better?
Normal Sig P365 pistols have one slot rails like Glocks. The X Macro has a picatinny rail so they don’t fit.
If I use this key will it mess with holster compatibility?
It didn’t mine
Question, does the TLR-8G fit the Macro or do you like the TLR-7 Sub better for this personal carry?
I’m not sure about the 8, I don’t own one to check. I’ve never been a big fan of lasers.
I have the 8G Sub 1913 on mine and it fits great
@@derecktefft390 nice I have the same setup as you. Have you found a holster that’s fits your setup yet, I’m having a hard time?
@@alejandraluian6671 No I haven’t really begun to search yet. I have a Tenicor Certum3 that works great without the light though. Let me know if you find one and I’ll do the same!
That in Pigeon Forge I believe it looks like the road that runs parallel to The Main Road. Then you said Buds Gun Store so your in Sevier County I bet if not where I said.
Are there any holster recommendations that fit with the tach dev key?
Thanks man. What holster are you using with that setup? A lot of holster makers are molding their holsters with key number 5. I wonder how far off the Tac dev key is compared to the #5 key.
I’m using a QVO Tactical Wingman holster
Do you have a link to that product for the macro?
I can’t link gun parts per TH-cam rules
@@gearrunner Ah, thanks for the clarification. Commie you tube!!!
You think streamlight would listen to customers about this to add that adapter.
I agree
@@gearrunner do you have a 1913 sub on a p320 xompact or subcompact frame???
@@86steventura my P320 Xcompact I run a 7a light on
@@gearrunner yeah, I’ve been trying to see if anyone has that sun light on a 320, but everyone usually gets the 7A.
@@gearrunner I ended up trying it and it fits on my wilson combat p320 x compact. It came with the rail key that fit correctly. Not sure if they updated the mounting inserts, but it worked for me.
Dude you are an ANGEL MAN thank youfortaking the time to do this
Do you think this insert key will work on the Icarus Precision xl grip module? It has a pic rail like the macro so just wondering. I assume it would.
I’m not sure. I’ve been looking at those grips but don’t have one yet to try.
Does your light ever come loose do you ever use loctite
The key from tactical development fits perfect with the tlr7 sub. $7.50
Would you be able to provide me a link to that block?
@@_elchief.exe_ sorry I can not, you will have to Google it. If I put a link for it TH-cam will give me a strike and possibly take down my channel for linking gun parts.
I just ordered this light , the tactical dev part. But I also have a holster ordered from anr that's for this gun and light. Will this tactical dev part effect the way the gun fits the holster ?
It shouldn’t, it just makes the light fit tighter
Do they make one for the surefires also?
I’m not sure about that
I wish I watched this before purchasing the sub for my macro with the Trex holster. To my surprise after waiting several months and already purchasing the holster light and red dot I had the Ah-oh moment realizing the sub doesn’t not fit. My fault I assumed the TLR and A holsters would work with the sub…..nope
Sorry, no the sun is a smaller light
I just finished building a Macro, now I am waiting for The TLR-8 Sub G which has the Green Laser plus 1000 Lumens. It was $238.00 I am going to put a Romeo Zero Optics. This one has a Wilson Combat Green Grip Module, Wilson Combat just released a week ago. I ordered a Blackhawk IWB Appendix Carry, then I Carry in a Chest Rig with a Regular 365 but that Also has the Wilson Grip Module. I did this because of the 17- Plus Mags, also installed the Sig brand Flared Mag Well. I grew up in K-Town in Marble city. Our Church and Cemetery is Headricks Chapel. My Cousin Has the Old Property there in the valley called Abbott’s. Hollar, My Step Pap paw Was a Cotter and he and my Grandmother Lived back in Cotters Hollow until she gave him a Ultimatum to Either Quit Making Liquor or She was Leaving him and moving back to Knoxville. My family names are Abbott, Godfrey, Hembree, Brewer, Brickey. From Both my Papaw and Grand Mother side. All my Family are Primitive Baptist. I live in Michigan now, I met my Soul mate (39) Years ago while up here. But we come back and forth to Knoxville, I lost my Youngest Brother a Year ago, he live over by Crossville. My Oldest Brother Lives in Sparta, Tennessee. If I am correct about the Street it is the Road that runs from 321 behinds everything on the West side of Pigeon Forge. Your carport along with those houses look exactly like the ones on that Road. I could be wrong UTV I am close if not on point. Lolll weird isnt it. But That’s What I do now. I retired from a Retirement here in Michigan after 23 Years. So when my wife’s is ready to stop working then we are going toTravel for a spell then probably move Down There over around Powell area.
Great video. This is just what I was looking for
Thank you, happy to help
Why did you decide to run the TLR Sub vs the TLRa?
Whats a good holster to run that with ?
I don’t see the link in the description.
I can’t link gun parts anymore. TH-cam will shut down my channel now.
A piece of tooth pick fit in there with one of the supplied keys would have solved the issue.
Where can i order the insert block? I bought the TLR7 Sub for my p365 x macro but it didnt come with the bar? Is there any place i can get it or should i just bring it back to the store i got it from?
Did you get the TLR7 Sub for the Sig or the 1913 TLR Sub?
I want to run my preferred light/laser, the TLR-8 A G, on my X-Macro.... so I'm pretty much f'ed as far as finding a quality IWB holster.
Stream light now gives you a #5 key which is perfect.
Haven’t watched yet, but #4 fits just right.
One fit good but had some play and one fit good but left a gap between the trigger guard and the light. This one fits perfectly
Ah, yea, there is some front to back play. I will grab one of those spacers, thanks.
@@chrisharris9710 you are very welcome
Why did you want to switch lights in the first place?
Because the holster I wanted was only offered for the sub light
@@gearrunner makes sense! I ended up finding the opposite in my search. I could only find reputable companies with the tlr7a for the X macro.
Iwould ask which holsters you went with, but I’m assuming that’s the upcoming video you referenced!
Always enjoy your content, keep it coming!
@@michaelnewman6628 it is, I am doing testing on them now and should have the video up soon. Thank you, I appreciate it.
I have my macro was going to order the trl7 1913. Just hadn’t found the right holster yet, I’d be interested for any suggestions. I usually use las concealment, I recently tried werkz, I’m always open for suggestion
@@Fleshwound747 I bought a QVO Tactical. Video I think will be up this Friday
for me the 5 fits perfectly and doesn’t even move
Ugh the dam rail insert is sold out😞 been waiting a week so far
Luckily for the x macro I used #5 and it fits just as close, I had to tighten it with flathead. No play or anything. Had to switch the right button to the low push button to have my trigger finger not hit it.
it's in stock right now
Can you please list the exact model to get for the TLR 7 Sub? There are a few to choose from.
It’s the TLR7 Sub 1913
Tactical Dev is pretty pricey for some random stuff, then makes a killing on the shipping.
Definitely, shipping was ridiculous
Have you found extra mags for the Macro yet??? I can’t anywhere
I haven’t and I heard it may be as late as December before they are available
Sig has them and gunmagwarehouse has them today for sure
@@galenclaybrooks601 I just put a video up the other day when Sig dropped them. I ordered 6
Thanks! Only tutorial I’ve seen on YT👍🏼
You are very welcome, thank you for watching
Where do I get the light insert?
I bought the TLR 7-A where can I buy this proper key you speak of?
Great videos by the way.
THANK YOU SO MUCH FOR YOUR HELP!!
You are very welcome
@@gearrunner Do you run the holster from their website? If so which one?
@@LacrosseandBmx I use the QVO Tactical Wingman
@@gearrunner Does it work with the key from the video?
@@LacrosseandBmx mine does
That’s the right set up on the 1913 rail. Not the monstrous TLR, + the Olight has quick disconnect clamp!
How much does the screw stick out the back of the light after you put on gun
As a lifelong Surefire customer
I bought the TLR 7 sub…
Light is easily discharges negligently, Thumb screw broke trying to get the wiggle out
Chinese made affordable option that as you see here needs altering
Do you have a link for this?
Tactical Development creates a specific key for the TLR7 Sub with zero play. (TLR7/8 Sub 1913 Key for P365 XMacro)
Where the link???
I can’t link gun parts one here, they will take my channel down
Hey Gear Runner. I was curious as to what holsters you have coming in? Any of them a black point tactical by chance?
Most of what I’m using today is QVO Tactical
My brother and I watched your video and when i saw your background and heard your accent I thought you lived near my grandparents in Tennessee where i have some family. THEN you said you live in Tennessee so my brother and I’s mind was blown. I live in Memphis(shit-hole) but like i said previously i have family in Tennessee (Union City/ Troy). I understand for privacy reasons for you not to tell me where exactly you live but i gotta know am i close?
link???? TKS
They need one for the new 7x
They got me on that $6 shipping as well. Ooof oh well gotta pay to play
When I seen the shipping I about fell out of my seat. They could have sent it in an envelope with a forever stamp.
Alright you got me.....why not just use the tlr7a?
Because the holster I wanted to use they didn’t make it for the TLR7a
There is no link
I can’t link gun parts, TH-cam will take down my channel
The tlr 7a fits this gun well with the #3 1913 key for me honestly.
I went with the 7a because the holster companies I use made them with the A and not the sub.
Bingo. I just bought both to see which I liked better. The #3 fits perfectly and I find the sub just doesn’t feel and look to fit as good in any way compared to the 7a
I agree. I just watched this video bought the new Key and then saw y’alls comment and tried the #3 and it fits perfectly lol
What holster? I need to find one and have been looking
@@jaime7166 I have a sidecar with a tourniquet attachment, and a JX tactical holster with an Ulti clip. I had to modify that one. Remove a lot of material and add a concealment wing to it so I wouldn’t suggest that one
They make one for sig rails my guy. It's the one that says Sig on the side of it.
Yea, I have several of those and they do not fit the X Macro. The X Macro has a picatinny rail and the normal P365 doesn’t even have slots under the dust cover. You should probably do some research before you comment.
@@gearrunner you should connect a bunch of bendy straws and suck your own farts
You sold another 3.....good lookin out for the community.
I did not know the tlr7 sub had a strobe function 👀
Good information. Thank you.
Very helpful thank you!
Great info. Thanks man
So I should put the Tlr 7 sub on my macro instead of Tlr 7a
You can use either, the holster I wanted to use was only made for the tlr7 sub
You must be from the south 😂, whereabouts?
Look forward to seeing holster compatibility with the key 👍🏼
Coming soon
Interesting thanks
You are very welcome, thank you for watching
Next replace the holosun with a RomeoX and you’re good