"Tree Eight Seven" ????? TREE??? Must be a Flip. Didn't I talk to you when I called T-Moble CS?? BTW - the published FPS spec is 325 to 350! So it's actually ABOVE spec! Also, thanks for NOT giving a alternate source for the Disconnectors, the Sear, and the Nozzle and Piston!! 3rd Rate Video!
I got a 3.8 as well and slapped a maple leaf hop chamber with I key, maple leaf crazy jet barrel, and 70 degree maple leaf bucking and it can over hop .40 bbs out to 200ft with decent accuracy. Had to do alittle modding to the outer barrel to get the chamber to fit. Love small pistols but not a lot of aftermarket options for a 3.8
@@clyde_santos ordered irex full auto and we extended mag sa shopee, planning on target shooting and cqb, if mag upgrade or replace meron kayo parts nun ? thanks. and kaya ba ni irex ang white puff dino ? ty
eeee.... can you actually link parts that we're suppose to replace? Or at least give us a names? "Replace this" is not helpful if I don't even know what to look for ;) I checked the store out, but can't find much of use there.
sir if I buy TM Hi Capa instead of WE T rex, is there any parts I need to upgrade? Im thinking about this t rex and tm hi capa for my first gun, it will probably be my only gun for a long time too
Hello Sir Clyde. I would just like to ask your opinion on WE 5.1K as a base gun for practical shooting. Is similarly treated as the gun in this video? Lemme know about your thoughts
@@pandastudios3274 fitting a aftermarket slide will be expensive and will little mod. You need to replace most of the upper part. Except for chamber and barrel
@@clyde_santos hello bro,pang newbie(starter) lng po ba ung t-rex hicapa? if I want to upgrade from T-Rex,anung baril kaya dapat kung bilhin na higher level than t-rex po?baguhan lng kasi ako and Im planning to buy my first airsoft gun,pero hanap ko full metal..pero ayoko ko yung pang starter lng,then after a year or 2 ...level up na naman.any advice po to a newbie like me?
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 10](http://i.ytimg.com/vi/8kldrPPsDZs/mqdefault.jpg)
Another great video, glad its not covid. I managed to fix my R30 slide 👍
Thanks bro. still strong, hope you are doing well too
Basically this hi capa is a ticking time bomb
what parts can be upgraded for this unit? please tell the name of parts
Matagal na iton video,try ko lang mag ask,yung ganyan mo po ba nilagyan mo po ba ng after market na recoil buffer Sir?
They’re starting to make select Fire versions of these🔥
How would you change fire mode??
@@TamDeLong-kf3rs I think there’s a little lever on the right side
Not a fan . 🤣.
@@clyde_santos Why dont you like the full auto mode ?
Nag oopen slide po ba yan sir kahit mmay bala pa po sa magazine?
More power Sir Clyde. 🤟
Nice review
Thread size and rotation direction plz need a tracer on mine
Wow.. nakaka addict ang 1911
Parang aw custom din po ang kasukat ng nozzle at bb housing sir?
NOT COVID 😂😂😂
Hahahahaha. 😂😂😂
🤫🤫🤫💦💦
Good reviews 👍🏼👍🏼👍🏼
thanks
Gusto ko sir ung nsa intro po. Ano unit yon ang ganda Kitang Kita kase ung buga ng gas
So how would I fix my nozzle
"Tree Eight Seven" ????? TREE??? Must be a Flip. Didn't I talk to you when I called T-Moble CS?? BTW - the published FPS spec is 325 to 350! So it's actually ABOVE spec! Also, thanks for NOT giving a alternate source for the Disconnectors, the Sear, and the Nozzle and Piston!! 3rd Rate Video!
I had we baby hi capa 3.8 and I tried to make it shoot just as good as a stock tm. Couldn’t beat my tm hi capa 4.3 no matter what i did to it
Well everybody cannot avail and upgrade TM pewpew 😌.
At the end of the day budget is the biggest thing to consider for having a pewpew
I got a 3.8 as well and slapped a maple leaf hop chamber with I key, maple leaf crazy jet barrel, and 70 degree maple leaf bucking and it can over hop .40 bbs out to 200ft with decent accuracy. Had to do alittle modding to the outer barrel to get the chamber to fit. Love small pistols but not a lot of aftermarket options for a 3.8
Gerritt Osborne wow sir I applaud you 👏🏿 good shit
2 of my client have a blowback problem. Turns out mighty bond or epoxy is used to fix the rear sight in place(the wrong way). Secret: less is more. 😉
😂
Kaya po nung stock trex yun gas na ginamit nyo ? White/gray can? Ty. And do you carry upgrade or repair parts in your shop for trex or irex?
go for weaker gas. pm sir cs pro custom for upgrades 😁
@@clyde_santos ordered irex full auto and we extended mag sa shopee, planning on target shooting and cqb,
if mag upgrade or replace meron kayo parts nun ? thanks. and kaya ba ni irex ang white puff dino ? ty
eeee.... can you actually link parts that we're suppose to replace? Or at least give us a names? "Replace this" is not helpful if I don't even know what to look for ;) I checked the store out, but can't find much of use there.
I guess i mentioned the parts name 😂
Anyway
Valve stop
Disconnector
Sear
(Hammer in the future)
sir if I buy TM Hi Capa instead of WE T rex, is there any parts I need to upgrade? Im thinking about this t rex and tm hi capa for my first gun, it will probably be my only gun for a long time too
For tm hope this helps 😎
th-cam.com/video/g_pdodzrBIw/w-d-xo.html
@@kidcaspertv2698 thanks hope it helps.you can try CS Pro Custom if you are in the Philippines. 😎 You can see almost allll of the quality parts.
Nakaka full auto po ba yun po?
magazine of 5.1 hi capa, is it compatible with 3.8?
Yes sir
All I heard was how long each part will break 🤣
At least no one will butt hurt if this explode at their face 😂
@@clyde_santos haha true true I've ordered mine today for a Milsim. But will only ever use this once or twice a year
Hello Sir Clyde. I would just like to ask your opinion on WE 5.1K as a base gun for practical shooting. Is similarly treated as the gun in this video? Lemme know about your thoughts
Good as starter gun..but maybe not as base gun for projects 😁
@@clyde_santos thanks for the reply! I'm wondering if the Infinity Slide will be compatible with this. What do you think?
@@pandastudios3274 fitting a aftermarket slide will be expensive and will little mod.
You need to replace most of the upper part. Except for chamber and barrel
Good. Day. Si. Francisco. Antonio. Ramirez. Garcia. Talavera. Nueva. Ecija. Mayroon. Akong. Alagang. Aso. At. Mayroon. Akong. Philippine. Passport. Para. Makapag. Travel. Kapag. Tapos. Na. Ang. Covid. Kamahal. Ng. Bronto. Sorus. Na. Caliber. 45. Na. Baril. . Sa. Strong. Hand. Na. Gun. Store. Mayroon. Bang. Bronto. Sorus. Na. Baril. ? Maraming. Salamat
Magkano po Ang 5.1 na hi capa?
Sir ano po bang kaylangan gawin para matangal yung leak ng mags
Palitan mo ata ung mags mo
can you put a tm slide on it
With minor mods. Yes 👌
Recommend mo ba yung WE M92 for my first airsoft sir?
As a wall hanger yes 😂
Sir ano po yung 2 parts na kelangan palitan? Thanks
Disconnector and valve stop 😁
I thought we was garbage?
Early we guns are garbage, recent manufactured we guns are fairly good.
I own a WE Hicapa 5.1R and it still holds up pretty fine
Pwede kaya sa daga yan??? Hehehe
Does the gun work with a Co2 magazine?
No this is a green gas pistol
Actually compatible both green gas and co2. But buy a separate co2 mag cause this comes with green gas mag most of the time.
Hm po yn
Yes and No
Yes it can take up Co2 magazine.
No, because the nozzle isn't built to handle the pressure of Co2 and will easily break.
@@megalosergamer4480 thank you
hello bro,saan kaya ako makahanap ng TOKYO MARUI HI-CAPA 5.1 GBB PISTOL?
Cs pro custom gbb specialist
@@clyde_santos hello bro,pang newbie(starter) lng po ba ung t-rex hicapa? if I want to upgrade from T-Rex,anung baril kaya dapat kung bilhin na higher level than t-rex po?baguhan lng kasi ako and Im planning to buy my first airsoft gun,pero hanap ko full metal..pero ayoko ko yung pang starter lng,then after a year or 2 ...level up na naman.any advice po to a newbie like me?
@@kuyaren7614 smells TM. Just upgrade the slide para maging metal.
T-WRECKS
HAAHHAHAAHHAHHA
nice aimbot dude
HM po
lods give away mo yan
hm po ito?
Try to contact CSP custom shop or chris toys.
Link on the description 😌
Sir idol Bukod sa TM ano png magandang brand po na pistol
Any hi capa series for TM
How much po yan lods
First 🙌🔥