That moment when you finish the build and it doesn't turn on .... I could feel that anxiety haha. Glad you found the issue though! I'm looking into building almost the same system and was mostly looking at case options (at this point trying to decide between this one, the Formd t1 and the CM NR200P). It's nice to have this very easy to see build video if I do decide to go with this case :)
Looking at this case myself, either this or the Dancase M2 Grate. For when the 9XXX X3D chips make it out to market. Hoping some new mobos will be joining the fold, pushing the prices down a bit on the older gen. ones making them viable options that don't cost like 300-400 USD.
in a large case it is not a problem to replace something during assembly, so usually I do not check the components, but with small PC builds this is probably relevant
Thank God for that hazard label about the battery, otherwise I wouldn't resist that round 3V beaut, omnomnom. Heard these give a nice little energy boost as breakfast and help with long term memory. Why the choice of MSI board by the way?
I had the same problem with PSU :D I must push it a little bit to the AIO because tube whas bending near a radiator and power supply cable push it harder
The CPU is cooled by liquid cooling, you can see the description. At the time of assembly, the price was about $ 3,000 or 12,000 PLN in local currency. You are welcome!
Hi! thanks for sharing a great build video, was nice to see the process, and potential problems :) ive ordered parts similar but went with asus MB and corsair sfx power...how are you finding the proart 4080? ive orded that too!
Glad to hear that someone liked this video) I tried. The card is not bad and quiet, the assembly was done for a client, so I can't tell you anything about long-term use of the GPU, but in stress tests under load I liked the temperatures and how the graphics card behaved.
I didn't select the config and the colleague who selected it didn't know about the incompatibility of the Cooler Master power supplies, just like me. When selecting the cooler, he was simply too lazy to look at the size(
Thanks, I'll keep that in mind. I didn't check the power supply on another motherboard, I just packed it up and returned it to the store. I ordered a new one from Asus and had no problems with it, thanks again for the info.
I'll build a PC with the same configuration next year, very good. Normally the video card has a plastic cover on the back of it, I didn't see if you took it off, check it later, so it doesn't get damaged.
@@Replapt late reply but deepcool was embargoed from shipping to the US because of its possible connections to the chinese government. Basically the US senate being super anti china as per usual which is a shame given how good deep cool products are for the price points.
@@Replapt I'm quite suprised that a tiny psu has 1100w power and 80plus platinum certificate, can't imagine how high in temperature is when 100% load, psu nowaday is so modern
What about the cpu and gpu temp? I plan to build something like this with SFF case. But I aware about the temperature if it run In 30 degree C room temp
@@Replapt yep, even with the 4070 TI super I had to take measurements to make sure I could find one that would fit. I guess I just assumed that the 4080 wouldn't make it considering the 4070 TI super barely did.
Warum so eine komplizierte Montage? Das Case kann wunderbar auf die Seite gelegt werden ... einfaches arbeiten von oben ... 😊 ... ansonsten schöner Build, die ProArt ist der Hammer ... nutze ich auch in diesem Case 👍🏻
Es ist nur so, dass beim Fotografieren nicht alle Winkel zum Fotografieren oder zum Zusammenbau geeignet sind. Wenn ich nicht filme, verbringe ich viel weniger Zeit damit, meinen PC zusammenzubauen.
for unknown reason this PSU does not work with this MIS motherboard :) you are not the only one: th-cam.com/video/JcAOJj0MnHU/w-d-xo.htmlsi=HHGgR4vGZZFRnt09&t=898
That moment when you finish the build and it doesn't turn on .... I could feel that anxiety haha. Glad you found the issue though!
I'm looking into building almost the same system and was mostly looking at case options (at this point trying to decide between this one, the Formd t1 and the CM NR200P). It's nice to have this very easy to see build video if I do decide to go with this case :)
Looking at this case myself, either this or the Dancase M2 Grate. For when the 9XXX X3D chips make it out to market.
Hoping some new mobos will be joining the fold, pushing the prices down a bit on the older gen. ones making them viable options that don't cost like 300-400 USD.
Aint nothing more irritating than a faulty PSU. Taught me to test everything out the case before I put it all together lol. Awesome build!
in a large case it is not a problem to replace something during assembly, so usually I do not check the components, but with small PC builds this is probably relevant
Thank God for that hazard label about the battery, otherwise I wouldn't resist that round 3V beaut, omnomnom. Heard these give a nice little energy boost as breakfast and help with long term memory.
Why the choice of MSI board by the way?
Hi, a colleague chose the assembly with the customer while I was on vacation. I think because of the good price-quality ratio)
cheapest b650 board here that aint shitty
I Love the specification Gaming PC
I had the same problem with PSU :D I must push it a little bit to the AIO because tube whas bending near a radiator and power supply cable push it harder
Сразу видно спец высшей категории.
Спасибо за такую высокую оценку моей работы)
Sleeved cables are easy to route for this case😊 Love the built❤❤
Thank you very much for the good rating, it is important for me
just made a similar build with 7900 gre instead of 4070.. cm psu doesn't go well with msi boards for unknown reasons, bought a corsair sfx one..
Very clean build.
Thank you very much for the good rating, it is important for me
Building almost the exact build. Thanks for the video.
Hi, how is the noise with the 4080 in this build in gaming? thx
Beautiful ❤
Lots of hard work keep going
Thank you, I will try my best
No aio is interesting decision for this case.
That's one giant fan cooling you have for the cpu!
Roughly how much is the total cost for you?
Thanks for sharing the video!
The CPU is cooled by liquid cooling, you can see the description. At the time of assembly, the price was about $ 3,000 or 12,000 PLN in local currency. You are welcome!
@@Replapt 3K USD!? Holy Molly, that's nearly 15k my currency! Thanks for the info!
Good system Buddy!!
Hi! thanks for sharing a great build video, was nice to see the process, and potential problems :) ive ordered parts similar but went with asus MB and corsair sfx power...how are you finding the proart 4080? ive orded that too!
Glad to hear that someone liked this video) I tried. The card is not bad and quiet, the assembly was done for a client, so I can't tell you anything about long-term use of the GPU, but in stress tests under load I liked the temperatures and how the graphics card behaved.
I am not going to lie i love how you build turned out but man you had so but sooo many complications on the way LOL
I didn't select the config and the colleague who selected it didn't know about the incompatibility of the Cooler Master power supplies, just like me. When selecting the cooler, he was simply too lazy to look at the size(
good pc
Very nice..
Wie sieht es eigentlich mit den Temperaturen aus vom 7800X3D ? Idle/Load und beim gaming? ...
about 60 degrees
Why keeping the plastic film, especially the one in the backplate? It will just make your vga card way hotter than it should.
I deleted it after checking the video card) You watched the video very carefully
There’s an issue between the msi mb and cm psu. Saw this from another tech tuber too
Thanks, I'll keep that in mind. I didn't check the power supply on another motherboard, I just packed it up and returned it to the store. I ordered a new one from Asus and had no problems with it, thanks again for the info.
This is tought thing
你的螺丝钉是不是太小了？看着都累
i need to work more in order to get this specs. the gpu is damn Fing expensive
Nice 🎉🎉🎉
wow
분명 그래픽카드에서 풍절음이 들릴 것 같군요
Nice
This music or background noise pisses me off but nice build lol
In this case, you can always turn off the sound while watching and turn on what you like on Spotify) Thanks for the good rating of the build.
I'll build a PC with the same configuration next year, very good.
Normally the video card has a plastic cover on the back of it, I didn't see if you took it off, check it later, so it doesn't get damaged.
Good luck with the assembly, I removed the film from the video card, don't worry)
what was the point of the noctua heatsink ?
it didn't fit in height and I replaced it with water cooling
I like this video and build but can't seem to find that cooler on the link
the cooler didn't fit in the end, there is liquid cooling
deepcool is banned in the us
@@fr_og why?
@@Replapt sanctions in the us
@@Replapt late reply but deepcool was embargoed from shipping to the US because of its possible connections to the chinese government. Basically the US senate being super anti china as per usual which is a shame given how good deep cool products are for the price points.
How much a PC like this one would cost prebuilt?
Hi. About $3000
@@Replapt Thanks.
So where I live, the BOM would be around 2200 (without screen) which would be a nice money made if I could sell this for 3000.
so what will happen to the first cpu noctua cooler and 1100w psu ? do you return them to the shop or do something else ?
I returned them to the store because it hasn't been 14 days yet)
@@Replapt I'm quite suprised that a tiny psu has 1100w power and 80plus platinum certificate, can't imagine how high in temperature is when 100% load, psu nowaday is so modern
@@namdinh7192 the temperature is not so high, because the efficiency is high, I think it is the same as in a good unit with a gold certificate
why such a big psu?
整線工作需要加強😅
Good
What about the cpu and gpu temp? I plan to build something like this with SFF case. But I aware about the temperature if it run In 30 degree C room temp
Hi, cpu ~60, gpu ~70, in a stress test, when the room is 30
@@Replapt no kiding? I thought it would be more than 90 in room temp 30 for crowded case like that...cool..
@@rizal8102 I'm not kidding) much to my surprise
@@Replapt Which stress tests do you use for testing CPU and GPU?
@@Tvv1SteR yes, Superposition benchmark
Check everything before putting it in the case
For such small assemblies this is relevant, for assemblies in large cases, it makes no sense
WHO DO PEOPLE KEEP BUYING MSI MB FOR AM5 WHY
idk whats worse, using stock paste or using a msi board
I literally bought a 4070 TI super because I thought for sure I couldn't fit a 4080 inside that case. 😢
Possibly, most likely depends on the video card model and manufacturer)
@@Replapt yep, even with the 4070 TI super I had to take measurements to make sure I could find one that would fit. I guess I just assumed that the 4080 wouldn't make it considering the 4070 TI super barely did.
@@Ace-BrigadeI believe this case can fit some 4090 too
🌸🌸🌸
Warum so eine komplizierte Montage? Das Case kann wunderbar auf die Seite gelegt werden ... einfaches arbeiten von oben ... 😊 ... ansonsten schöner Build, die ProArt ist der Hammer ... nutze ich auch in diesem Case 👍🏻
Es ist nur so, dass beim Fotografieren nicht alle Winkel zum Fotografieren oder zum Zusammenbau geeignet sind. Wenn ich nicht filme, verbringe ich viel weniger Zeit damit, meinen PC zusammenzubauen.
hello, thanks for sharing!!! did you check the Chipset and VRM Temps?
Hi, no, I think there is no problem with that
for unknown reason this PSU does not work with this MIS motherboard :) you are not the only one: th-cam.com/video/JcAOJj0MnHU/w-d-xo.htmlsi=HHGgR4vGZZFRnt09&t=898
очень сложный компьютер, я ищу компьютер с высокими характеристиками для своей работы
Wath a mess!
Bro give it to me I'm the needy on
Nice
Good
Nice