Keith, With videos you do where a device is used for programming could you either let us know if we need a certain device or if something such as a capable J-2534 "J-Box" is allowed to be used. I watch the videos but some of the terminology isn't as confusing but trips me up at times. For example did you use a CarDaq Plus 3 or other OBDII programming tool? Links to what you use would be helpful or just create a list of links and maybe create some shortcuts that post certain links based on what programming tools you're using and you select to add to comments section of video when you upload it?
How are you my friend, I have a 2021 Ford Taurus, I had an accident, the Airbag was fixed, the Airbag control was changed, and the Factory Alarm system worked, how do I turn it off? I have an original IDS and FDRS program from the Motorcraft website, how do I turn off Factory Alarm I have an original IDS and FDRS program from the Motorcraft website, how do I turn off Factory Alarm I have 2 keys. I have PTS NASTF Username and Password.
hello I have a problem with my module, I get the Ford emblem and then a black screen, I removed the battery for a few minutes, I reset Syng with diagnostics and again a black screen, the radio works, but I can't adjust the frequencies, the disc is inside and I can't get it in, but it reads it and my music plays did they have any way to flash the module and what the flashing is done with
Hello brother , i just upgrade my sync 3.0 to 3.4. After the upgrade its says navigation fault how do i can downgrade and back to 3.0 , if u could just give me some advice plz ?
I have a Ford Edge 2015. I did a SYNC 1 to SYNC 3 conversion. I bought a ODB for forscan thinking I would have to program it. I changed out the APIM and everything and the thing is working perfectly backup camera m, screen, steering wheel controls. My APIM is from a Ford Edge 2019 though could this be the reason I didn't have to program it?
I dont think thats the reason you didnt have to program... APIM is atatched to the SYNC3 screen, did you change your ACM? if yes, thats the reason! I recently bought a SYNC3 and the ACM from a Ford Focus and didnt have to program it either when I swapped everything from my Sync 1 Ford Focus.
I just bought a ford explorer 2017 base, and the middle dash screen got broken, is in blank so I have to change it but the mechanic guy told me that I have to go to my dealership to reprogramme the sync system, is this the way to programmed?
I upgraded my sync 3 4" set up to sync 3.4 8" screen while ago and used the apim module that came with new screen, I tried to use my apim but it would only show picture in top corner a 4" square so I assumed apims are set to 4" or 8" screens. Since this I've been able to use my Ford app as my modem won't recognize the apim, I'm assuming I need to go in and somehow program the new apim to communicate with the modem or is there a way to get my old apim to display on screen properly so I can just use original apim as it's matched to my modem? Thanks
I have a 2015 Ford Escape that reads the aux, usb or sync, I checked the fuses thinking they were useless but they do work. Do you think what you do will be able to solve the problem?
I recently purchased a 2017 ford f150 xl but some of the numbers and text in the center display are difficult for my wife to see. Is there any way to enlarge some of the fonts on a center display by some means?
How are you my friend I have a problem We are in the Middle East in the Kingdom of Saudi Arabia I am an electrician and I have the original IDS program and I want to subscribe to PTS and get the username and password so that I can program the security system. If you have a solution, help me
I have had the same issue with 2018 F150 platinum. Because of this, I will never buy another Ford product. They do not support vehicles when they have defective parts. Was replaced what’s under extended warranty 20,000 miles later save issue just out of warranty they were $1500 to look at it it’s a Ford defect should be extended warranty for lifetime.
ok...you win....this snippet is making me sign up at L1....it worked 🤣🤣🤣
I agree, been telling myself to sign up and just keep blowing it off.
Well worth it! Been here a long time but not as long as others. Probably a year for me and still plenty to watch between 4-5 websites I watch.
Keith, With videos you do where a device is used for programming could you either let us know if we need a certain device or if something such as a capable J-2534 "J-Box" is allowed to be used. I watch the videos but some of the terminology isn't as confusing but trips me up at times. For example did you use a CarDaq Plus 3 or other OBDII programming tool?
Links to what you use would be helpful or just create a list of links and maybe create some shortcuts that post certain links based on what programming tools you're using and you select to add to comments section of video when you upload it?
Do you have any fdrs j2534 videos?
Where to go for this website?
How are you my friend, I have a 2021 Ford Taurus, I had an accident, the Airbag was fixed, the Airbag control was changed, and the Factory Alarm system worked, how do I turn it off?
I have an original IDS and FDRS program from the Motorcraft website, how do I turn off Factory Alarm
I have an original IDS and FDRS program from the Motorcraft website, how do I turn off Factory Alarm
I have 2 keys. I have PTS NASTF Username and Password.
hello I have a problem with my module, I get the Ford emblem and then a black screen, I removed the battery for a few minutes, I reset Syng with diagnostics and again a black screen, the radio works, but I can't adjust the frequencies, the disc is inside and I can't get it in, but it reads it and my music plays did they have any way to flash the module and what the flashing is done with
Can I bring my sync 3 back to life with this method? I'm having a black screen after update
wondering the same
If you get a black screen. And that APIM was taking of a junk yard you need to update it with the diner car vin. I had this happen to me.
@@hectornogueira6947how do you do this? Could you give more information?
Hello brother , i just upgrade my sync 3.0 to 3.4. After the upgrade its says navigation fault how do i can downgrade and back to 3.0 , if u could just give me some advice plz ?
I have a Ford Edge 2015. I did a SYNC 1 to SYNC 3 conversion. I bought a ODB for forscan thinking I would have to program it. I changed out the APIM and everything and the thing is working perfectly backup camera m, screen, steering wheel controls. My APIM is from a Ford Edge 2019 though could this be the reason I didn't have to program it?
Where did you buy your SYNC 3? How much was it?
I dont think thats the reason you didnt have to program... APIM is atatched to the SYNC3 screen, did you change your ACM? if yes, thats the reason! I recently bought a SYNC3 and the ACM from a Ford Focus and didnt have to program it either when I swapped everything from my Sync 1 Ford Focus.
I updated my Ecosport 2018 India. After reboot it's stuck on Insert USB to update screen. Please help. Can it be fixed with this method?
I just bought a ford explorer 2017 base, and the middle dash screen got broken, is in blank so I have to change it but the mechanic guy told me that I have to go to my dealership to reprogramme the sync system, is this the way to programmed?
I upgraded my sync 3 4" set up to sync 3.4 8" screen while ago and used the apim module that came with new screen, I tried to use my apim but it would only show picture in top corner a 4" square so I assumed apims are set to 4" or 8" screens. Since this I've been able to use my Ford app as my modem won't recognize the apim, I'm assuming I need to go in and somehow program the new apim to communicate with the modem or is there a way to get my old apim to display on screen properly so I can just use original apim as it's matched to my modem? Thanks
Were you able to find a solution?
Hey did you find a solution to this?
How to do crank relearn with fdrs
Thank you so much!
I have a 2015 Ford Escape that reads the aux, usb or sync, I checked the fuses thinking they were useless but they do work. Do you think what you do will be able to solve the problem?
Nope
@@L1Training what is the solution? What part do I have to change?
@@davided.9892 needs to be diagnosed to determine the recommended repair.
Can anyone register to use the Ford website to utilize the program? How can an average person reprogram the APIM?
Yep, just cost money to buy equipment. Could probably get away with only spending $1500 - $3000 depending how cheap you can get stuff.
I recently purchased a 2017 ford f150 xl but some of the numbers and text in the center display are difficult for my wife to see. Is there any way to enlarge some of the fonts on a center display by some means?
How are you my friend I have a problem We are in the Middle East in the Kingdom of Saudi Arabia I am an electrician and I have the original IDS program and I want to subscribe to PTS and get the username and password so that I can program the security system. If you have a solution, help me
There is no LSID (VSP) security ability outside of the dealer network unless you are in US or Canada. You will need to find aftermarket solutions.
Very nice
Need Arabic trancelat
I have had the same issue with 2018 F150 platinum. Because of this, I will never buy another Ford product. They do not support vehicles when they have defective parts. Was replaced what’s under extended warranty 20,000 miles later save issue just out of warranty they were $1500 to look at it it’s a Ford defect should be extended warranty for lifetime.
You think thats bad try to get ram/dodge to stand behind there issues and there issues are worse
@@maysonsandsas a Ford technician that works for an independent shop and work on everything. There is much worse things than Ford 😂