Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
Hai dear sir my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners thanks & bestregards vinodhkumar
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Quite good and helpful video. however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone. Why is it happening so ?
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier. Put the playback speed as 0.5.. :P
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!! Cheers.
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line . Help Please Sir
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly???? This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry. Hope that helps..!!
Mugesh Kumar Hi Friend, You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib. This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile. Have a nice day..!!
Behrang Shamsadinlo Are you unable to find the helix tool or you are use the tool? Please make the question clear and Clarify where exactly you face the issue..!!
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
durges kumar Pandey
It is not possible to upload all videos in Hindi. I am sorry. Please note that English is a common communication language.
dhanaraj6
bro i just started practicing you are my support both morally and over here! thank you for your work ! you are awesome!
Needed this for school. Worked flawlesly. Thanks mate
Clear audio + slow clicks helped a lot. Thank you!
the way ur going fast u will soon beat usian bolt
You can slow down the video under settings.
Gud mrng sir i have seen all videos of your sheet metal class
I'm very happy for that i learned more from tht
Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
thanks a lot bro.. i was struggling a lot without tree... even my guide dt know this... it was very usefull thank u...
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
for hex bolt top you can use groove command itself. the power input revolve command takes more time.
i am a beginner and its very useful sir....thnk u
You explain nicely it's just that the watermark in the middle is irritating.
Hai dear sir
my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners
thanks & bestregards
vinodhkumar
Awesome vid. Speed of the instruction is fine if you're familiar with the tools used the video. Easy peasy. keep it up.
thanks!i like it! i am a new user of CATIA!
thank you ! happy a nice day~
You are welcome..!!..:)
thank you friend, very good your video
Great video but you go really really fast. Kept having to pause. Could you slow it down a bit? Thanks man! Keep the vids coming
Thank you sir,
I learn a lot from your videos, requested to upload few parametric modeling videos or if already uploaded pl. share it
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
Thanks very helpful 😊
this is easy and learnable for me now thank u sensei
good video...good information
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Only one suggestion, Repeat. Sometimes you just have to repeat to get things right..!!
Let me know If it didnt work..!!
You are awesome! Keep it up!
can you upload any complicated design which is used in industries.this video is useful
sir you are awesome at work but it goes little bit fast
if you don't feel then ignore no problem
Hi Shakeel, My name is Md Rafiqul Islam. it is helpful video. Would you please upload tool design such as fixture, jig etc in catia v5
It would be very helpful if you go a bit slow sir..
TH-cam offers you an option to select playback speed
Agreed
Nice explain ..tq bro ..
hey im rajashree.. will you please add a video of designing a car model with designing a single part of it as welll as allover assembly.
Thanks for video!!! But please be sure that user-especially beginner-should match your speed.
very nice tutorials, :)
nice tutorial..btw how did you conveniently bring up in-context menus to add constraints after 4:13...thanks in advance!
once you are on the dimension option, just right click inorder to view available sub option for instant constraining..!!
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
Great video thanks!
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Try these videos:
th-cam.com/video/nEoZM4HVXLE/w-d-xo.html
th-cam.com/video/1A5Z8YGgqYs/w-d-xo.html
Amazing tutorials :D
for a video that says for beginners, you click around way too fast
i was thinking the same thing... I have too many questions
Ur going soooo fast
thanks a lot for this nice video..
kemah demo li
thanks for the tutorial ..!!
Quite good and helpful video.
however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone.
Why is it happening so ?
vivek Inder you need to click on the arrow pointing downwards while using groove
Thank you
Nice work :)
Very fast explain. So please slowly explaine and work..... Informative video
Wheres can i find the helix column manually? Without that shortcut bar
What is the command you have typed in for helix
hey thank u for this video ..... can u please show the elaberated use of extrapolate option on surface work bench
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
it would be very helpful if you go a bit slow sir.
while constructing a reference lie for revolving. i am not able to get the reference line in the correct plane for revolving. i need some help
awesome
It is very fast
Niiice i have an exam soon and im just sooooo stupid when it comes to Catia :'(
Soukaina Belasri baby you are so cute..... where are you from?
very helpful
How did u bring helix comand in part design
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested
At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
+Mohammed Shakeel i have the same probleme and i don't know how to solve
if any body know a solution.
pleaze help us
what tools you choose unclear
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier.
Put the playback speed as 0.5.. :P
This is not for the beginners I think.. Better you say step by step in a slow manner it will really help us.
thank you sir.
I have Q i am doing produuction engineering. Can i do job in designing after my engineering.
can u explain how to make ramsbottom safety valve
why you don't use "thread/tap"?
Why do you use constraint everytime where as you can directly enter value
Hi sir...goodmorning
I have a question ?
Can we create exploded view animation in catia v5 r20...?
can we use shaft instead of revolve?
I am a beginer.How do i create a metric 12 threaded screw?what is the pitch for the thread?
You can refer to this video:
Catia V5 Tutorial|How to Create Threaded Hex Scre…: th-cam.com/video/G1-Y4R34wwk/w-d-xo.html
sir can u plz explain how to design a helcal gear and worm
plz i need it for my project work so waiting for ur videos
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!!
Cheers.
thanks a lot bro :) (y)
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line .
Help Please Sir
What is the procedure in doing one complete desgin in Specification tree.
sir can i contact with you for more clarification regarding the assembly and part design
i like it but ur camera is too weak
Why when I select the helix command the part disappears? I simple can't do this without the part. Please help me!
ขอบคุนมากมากเลยคับ
any easy way to get chamfer at edges.If any please let me know
Sir please post what are the tools in the CATIA and how to download it
y r u going fast sir.. please slow down
+Joel ManohaR you can change the settings of the videos to slow it down
Really Nigga?
apke piche koi lagga hai jo itna fast karte ho
CAN U HELP ME TO MAKE MODEL OF A CAR DISC BRAKE, PLEASE??
dear sir plz. upload all catia tutorial in hindi thanks
I did but its not showing split option
tnx man
sir wt u typed to get the chamfer ,it is not clear
NICE USING SHORT-CUTES
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly????
This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry.
Hope that helps..!!
What about the profile sketch for Metric Threads
Mugesh Kumar
Hi Friend,
You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib.
This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile.
Have a nice day..!!
what commend for threads
Bro, put sweep operation
i keep getting an error either boolean operation and feature definition error. someone have any idea to solve this?
Behrang Shamsadinlo
Are you unable to find the helix tool or you are use the tool?
Please make the question clear and Clarify where exactly you face the issue..!!
Helix command not found
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
hi thanks for dis
sir how to make drill tool on catia
How to get Octogan
sir actually I need ur help in one design
Master cam ka koi video bana o v9
sir how to cut groov on shear
how to define Arc length in Catia