For the past 30 mins, I've just read 5 articles, 3 other videos and only this vid helped me understand the true process of Tracert today. I never comment on TH-cam. Thanks a lot!
So, when I send a request to google.com it goes through routers. Are they the ordinary routers of people at home or only organizations or service providers?
Hey, I have one question, like why does traceroute or tracert gives different results on different network or sometime on same network. Could you please answer this question.
Brilliant explanation. I assumed TTL was an actual unit of time, such as a minute or second. When I realized it was just an increment/decrement operation, it made complete sense. Thank you.
u are the god of traceroute, i am CCNP and i never understood the concept behind tracert well until i first met your vid and in just 6 mins i am good and makes perfect fkin sense, cisco implementation of traceroute does not use true ICMP with TTL set to 1, it uses TTL = 1 with destination UDP port= 33434 mechanism to get the feedback from routers & therefore get the ip
can you explain a bit more detail about when you see the * * * message , like you try to ping something that yo know should be there, but not able to ping now, so you use tracert and your first 5 hops you get a response, then * * * is that mean that switch is the issue?
Neat explanation. My question is what happens when I run a traceroute, I get to the target address in 9 hops. So I have ten addresses on my scree, address 1 is the first gateway between my modem/router and the target, address 10 is the target. Address 9 has 100% packet loss even when running a traceroute every 3 seconds for 10 minutes straight, but the target address still has 0% packet loss and a normal ping. If address 9 is down, how can the packets even reach the target? How can I identify address 9? All I get is "No response from host" or "Request timed out", no host name or address is given so I cant even tell what gateway needs to be looked at.
100% packet loss; so you are probably getting * instead of a numeric value. This means you are not waiting long enough to fetch the Router information. So Increase the Wait time using the option, -w and number of queries by the option -q .
Traceroute uses ICMP requests which operate in Layer 3 (Network layer). So only the Network layer and the layers below it, viz., Datalink layer & Physical layer, are covered.
Thank you. This book of mine never explains Traceroute this simply and easy to understand.
For the past 30 mins, I've just read 5 articles, 3 other videos and only this vid helped me understand the true process of Tracert today. I never comment on TH-cam. Thanks a lot!
Can you help me out of this. Still I can't I understand. 😢
@@louellaflores5024 How can I help ya?
This was short and well explained. Thank you!
Thanks . It's very easy to understand
Great Work
Really good man! Helped a lot! keep up the good work
Thank you
That's clever
So, when I send a request to google.com it goes through routers. Are they the ordinary routers of people at home or only organizations or service providers?
did you ever learn the answer to this? because I'm curious, too.
Hey,
I have one question, like why does traceroute or tracert gives different results on different network or sometime on same network.
Could you please answer this question.
could it be that different request go through different network segments
outers based on things like load balancing and network conditions?
honestly this is the most clear and precise video I've watched that explains how tracerout works. really well done.
best networking lecture I have ever watched, thanks bro
I second, third and fourth this statement.
This was fantastic! Well spoken and precise. By far the best description on the internet.
Excellent explanation
Bravo man , good explanation , i got this question on job interview i didnt knew the response , but now i know
Thank you
Guys its pronounced Tracer T and its for viewing whos on google! Noobs
Yo man you're a blessing, I have been struggling material until now 🙏
Great . Hope I was so intelligent like traceroute 😸
So the number of hops depends on the latency of a router or an ap?
THAT was helpful! Thanks!
Subscribed..you actually understand what you are talking about in this video. Very helpful!
I hope you ditched that leather jacket bro
Brilliant explanation. I assumed TTL was an actual unit of time, such as a minute or second. When I realized it was just an increment/decrement operation, it made complete sense. Thank you.
Wow. That's a very good video.
wtf do you mean by package
THANK YOU .... This is what I wanted to know .. right away to the point !!
thanks, great video
Thank you sir!
Nice Explanation !!!
This is really helpful!
Awesome explanation
Great instruction!
Thank you.
u are the god of traceroute, i am CCNP and i never understood the concept behind tracert well until i first met your vid and in just 6 mins i am good and makes perfect fkin sense, cisco implementation of traceroute does not use true ICMP with TTL set to 1, it uses TTL = 1 with destination UDP port= 33434 mechanism to get the feedback from routers & therefore get the ip
best video ever
Perfect explanation!!! Thanks
Thank you!!!
Really well explained... thank you !
brainfriendly stuff! :D
thaks
superb !!
Clever
Best explanation I've seen so far... Thank you!
Thanks
Thanks!
Superb explanation! Why don't they explain like this in University/College...
can you explain a bit more detail about when you see the * * * message , like you try to ping something that yo know should be there, but not able to ping now, so you use tracert and your first 5 hops you get a response, then * * * is that mean that switch is the issue?
Hey I was wondering if you can run this test on an Xbox between a game server? Thanks
This is an absolutely gem and kudos to Geoffrey for putting this here. It is a shame that just a 1000 people have watched this. Wonderful Geoff!!! 👍
And what happens when I lead the traffic from the target server to another server? Is this hop included into the traceroute?
Great explanation! Thanks so much for making these videos :)
chad
Great teaching! Thank you for sharing!
you are very good at explaining it. thumbs up mate.
Bro you are more better on explaining this compared to my professor
Even professors don't know this type of information in detail.. :)
Thanks this really helps me with my Network Communications classwork
Thanks a bunch, really useful video.
really easy to understand - thank you so much!
Great explanation..Thnx for helping sir...
This is such a great explanation video! Thanks, this really helped me :)
thnk u
Perfect explanation, thanks
Very good and succinct explanation!
You my man are very good at explaining things
You have uploaded these videos just the right time.. Thank you so much..
Very clear and concise explanation. Thank you.
Absolutely brilliant! What an explanation!
how can you find the location of a website,
thanks for making a detailed simple explanation
Neat explanation. My question is what happens when I run a traceroute, I get to the target address in 9 hops. So I have ten addresses on my scree, address 1 is the first gateway between my modem/router and the target, address 10 is the target.
Address 9 has 100% packet loss even when running a traceroute every 3 seconds for 10 minutes straight, but the target address still has 0% packet loss and a normal ping. If address 9 is down, how can the packets even reach the target? How can I identify address 9? All I get is "No response from host" or "Request timed out", no host name or address is given so I cant even tell what gateway needs to be looked at.
100% packet loss; so you are probably getting * instead of a numeric value. This means you are not waiting long enough to fetch the Router information. So Increase the Wait time using the option, -w and number of queries by the option -q .
Thank you for this awesome explanation! ! ! ! :)
Fantastic explanation thank you so much!
best explanation, ever!
Great explanation. Thank you
Great job in explaining it!
Very interesting, great explanation - Thank you!
thx...very useful!
Great explanation on traceroute!
Finally got this! THanks!
WOW, it makes sense! Thanks dude
great explanation. thanks!
Thank you! This was very informative!
Great explanation! Thank you!
nice explanation. thanks
Excellent explanation !
what layers of the OSI model are hit during a traceroute? can all 7 layers be hit?
Traceroute uses ICMP requests which operate in Layer 3 (Network layer). So only the Network layer and the layers below it, viz., Datalink layer & Physical layer, are covered.
Excellent video
Weird intro.
Thank you,
subscribed :)
Nice video!
Thank u sirr
Best one, thank you
thank you !!!!
Best.
Awesome
That was smooth!
Cheers
Thank you