@@CC-px8dy We appreciate you reaching out to us, we are always here to help! We answered another one of your comments in greater detail. That might be the one that helps best however just in case, we have attached a link below that discusses the common causes. th-cam.com/video/5lgMhKYGuto/w-d-xo.html Please keep us posted C C.
@@beverlycherry3667 Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That’s great to hear. Hopefully no more sporadic behavior from your ABS system. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
😱OMG!😱 This actually worked on our 2006 Chevy Silverado every time my husband cranked up the truck the ABS Light and the Brake light would come on. He would kill the truck and disconnect the battery for 5-10 mins and it would help for a few minutes but then it would come back on as soon as he started to drive. We just came across this trick of yours and it worked. Thank you so much you not only helped us but you saved us $2K. Thank You so much!
Thank you, Michael Borders! I did what you said in this video, and it worked like a charm. No more ABS and skidding car lights showing. Victory! Many, many thanks. Cheers.
This is awesome! It works! I did the three step process...abs and brake lights still on but once I drove out of the drive way, maybe 10 mph, reset was complete. Excellent peddle, fluids good, etc. and checked prior to reset attempt of course. Thank you so much!!! 🌟👏🏻😃
@@DIYwithMichaelBordersnever had to mess with abs sensors before but my Honda Accord's front right sensor loses contact once above 30 mph, any suggestions on what this could be?
@@donniev8181 Thanks for sharing your experience, it’s likely that your sensor will need to be cleaned and reconnected…or it may need to be replaced all together.
It's a MIRACLE!! I am a competent individual with a broad knowledge of mechanics and electronics. I was very skeptical. But it does work actually. Twice the problem warning light returned. Third try fixed it permanently. Thanks, Michael. You probably saved me a thousand bucks. No telling how much time and frustration. How simple can a fix be.
Thanks for watching, and thank YOU Rick! Saving a thousand bucks is a great thing!!!! 😁👍 Means the world to us that you took the time to leave a comment. Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰
The same happened with me; The problem warning light returned twice, but how did you fix it permanently? Maybe this is your chance to do something for someone... Blessings
Thanks bro my mom's jeep brakes were stuck and I've replaced/rebuilt engines and transmissions and never knew this was a thing. She was freaking out and I saved her day thanks to your quick video!
I just did this on my 99 Subaru. The ABS lights came on this morning and my breaks were working fine so i thought it might have been a fuse- did a quick google search, this video came up, I did the steps and the ABS light is off. So I feel safe, and confident knowing it wasnt a real issue at this time. I really appreciate videos like this that help us DIY and not fuss over things we can easily do ourselves. Thanks again!
Awesome job making it a DIY project. You will continue to benefit greatly by making your projects DIY… And we will always be here to help answer questions. 👍🧰
Thank you very much Mr. Borders. I have a Mitsubishi Outlander V6 (2011) which had this problem. Thanks to your advice, I solved the problem immediately. It worked the first time. Best regards from Lima - Peru.
Happy to help, thank YOU! We are happy to hear you did not hit an ambulance. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Happy to help, and great to hear this helped reconfigure your BMW’s ABS system. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
I want to thank you, this has been driving me crazy for a year. Iwas ready to replace the abs unit after replacing the upstream O2 sensor. I drove the car (2000 z/28) a mile and they went off and have stayed off. What a relief as i cannot stand lights on the dash. I have been suscribed for awhile but must have missed this at first. Thanks again...
We are so happy to help! That’s awesome that you have performed this procedure to reset your ABS system. Please reach out to us anytime and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com We DIYers need to stick together! 🧰
Wow!! Hyundai Genesis Coupe 2013! It worked Thank you so much!! My sunroof stopped working in the summer. Completed the steps here to turn off the ABS and ESC dash lights. Took a drive because they didn't turn off right away. They were off when I turned out if my driveway, also the sunroof works again!
Awesome, guy, Thanks a lot! It worked! I just got my passlock/ignition cylinder replaced and all my keyfobs recalibrated and about one week after dropping $500 bucks and one light finally going out, three lights come on: abs, traction, and parking brake all light up and stay lit! Didn't want to drop any more money for a "diagnostic" and two hours in a waiting room. My 2011 (manual) Colorado chirped at me about 5 times after I pressed the gas like you said and when it started, no issues!
@@Gods-Elect Thanks for watching, great question. Ensure that key fob is not inside vehicle and can not be reached by vehicles signal. Press start button which will turn on electrical system and computer without starting engine.
Unbelievable. I have 2012 ford edge and the abs light was on. 3 different places told me that it's the abs module. I did what you showed and the problem was solved. That's so much. (From Israel)
WOW! It worked. My big brother just installed new battery posts on my car so I was worried that he knocked something loose but he insisted that it probably turned the TCS lights on my dash since the battery got disconnected....and he was right. Thank you for saving me a trip to the repair shop.👍 Oh and I have a Mazda so apparently it is a universal thing 🤷🏼♀️
You are very welcome April, thanks for watching. Welcome to the DIY Raptor Club. New battery before winter time is a bonus...that’s if you live in an area that gets cold. Hope all is well. 😎👍🔧🔩
Good morning ☕️ that’s awesome. You are spot on, you saved a good chunk of cash by making it a DIY project. Well done, and thank you for sharing this. 🧰
Thanks Mike, I did the reset on my 2016 Ram, man what a money saver it worked. I wished I saw this video, earlier, almost crashed when the ABS mod failed. Thanks again
Mike, I cant thank you enough. I have tried many other youtube videos and nothing, the brake system is working fine so I came across your video, tried it and it worked like a charm. Very greatful. Thanks so much.
We are very honored to read this, thank you for reaching out. Resetting your system and getting it reconfigured properly is a great way to start the week. 😁👍 You will continue to benefit greatly by making your projects DIY. We are just a comment away if you have any questions. 🧰
@@steveanderson461 Thanks for reaching back out to us with an update. From here, it might be best to have an OBD scanner read your ABS fault codes to see what exact part is causing your issue. Below is a link to our OBD scanner tutorial. th-cam.com/video/DvogiRhGEYk/w-d-xo.htmlsi=qrf0CNBVvEijrsmJ 🧰
Just changed the wheel hub and magnetic strip on my CTS and followed Mike's simple steps. Initially thought "yea right", but it worked. Glad I came across this video.
Thanks for sharing this Doug, we appreciate you watching. We are happy to hear it helped. Keep in touch, us fellow DIY’ers need to stick together! Enjoy your night. 😎👍🔧🔩
Hi Sir Michael, recently I just have a problem, regarding the ABS,I just watched your video regarding to re set the ABS Light,and I tried it and it works.Thanks for the tips.im here in Kerela India I'm from Philippines.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Great to hear, thank YOU for taking the time to share this. 2014 Explorer is a great vehicle. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Did the trick on my 94 Cavalier Z24 after replacing the master cylinder! Thanks so much. I'm military and have to ship the car from overseas in a couple of weeks, and an ABS light would keep it from shipping.
Good morning ☕️ that’s awesome. The Z24 is a classic, we still have a 1991 Chevy Z24 Cavalier. 😁 Hopefully all goes well with the shipping process, and god bless you for your service. Thanks for taking the time to reach out to us. 😁👍🧰
After changing the wheel hub bearings etc. the abs and traction light came on. I came across this video googling abs. Well Walla after following the 3 steps the lights went right OFF! NOTE: I did NOT have to do the drive thing.. This worked perfectly Thank you so much for sharing!!! Your Awesome♥️😊 2005 Cadillac SRX V-6
Hi, I am working on a 2011 Buick Enclave. I bought it on IAA Auction in March, had it delivered from the auction site in Fayetteville, Ark. So, expectedly it had a few twiddly issues. Pumped in some freon, works like a champ all summer so far. And a mystery light on the dash, ABS and the traction control skidding car. Brakes worked so I ignored it all summer. An interesting oddity not mentioned in any videos. After I have been parked for a while, on taking off again it will often turn off the ABS/Traction lights. If I just idle around they stay off once I hit 19 or 20 mph they come back on. I did the check engine light thing, but it was very hot that day. 108 so I did not last long with the driveway check. This indicated a long list of snigglets. amongst them rear left issue with sensor. So, it was not clear if it was sensor or the magnetic ring on the bearing hub. Now that it is cooling off a bit, I will be working on that issue a little closer. The three presses on the accelerator did not turn off the ABS light, it did its usual of as I was taking off from the drive the doors locked, ABS/Traction lights went off, and at 20mph came back on again. Now the noticeable change in the system after the three peddle reset. While ABS light was off, the brake peddle did not sink to near the floor and make a vibration to the foot with a noise like stepping on a pigglet. The brake peddle was engaging the calipers near the top as it should after a proper bleeding. After the lights resumed their annoyance mode, the brake peddle was still engaging near the top as it should with no sinking or sponginess, I finished the 4 mile test drive with a big smile. But still need to get to the cause of the ABS. I can probably unbolt the sensor and see if it is coated with steel and brake pad dust, clean it off or more likely just plug in a new one their like 20 bucks and the original is 2011 and due to make buick some more money. The Hub, I am afraid I will have to go to a shop and have it looked at. So, all that said. Yes, the three peddle reset did improve the situation. Thanks for the tip. Now the TPMS sensors battery is getting weak on the front left. I about had a doodoo in my pocket the other day on the busy highway when that warning light came on. Overnight, it settles down again, but after a few minutes of operation with report a low tire, or disapear. Next step after this comment is order a package of the valve stems with a blue tooth battery powered sensor to install in the tires. One goes lame, they all four are probably close to the time to earn Buick some more money. I found a package of four from someone selling through walmart for like 40 bucks shipped. A tire shop near just asked for a donation to break down the tire and install the sensor. Very nice hard working barely english speaking entrepreneurs. Again thanks for the tip, I will keep an eye, er foot on the peddle for a few days and see how this new action works out.
@@RickRamo Thanks for watching and sharing your experience, we really appreciate it. Any update on your findings and status? We would also recommend ensuring that all of your tires are properly inflated to the safe and required psi. Low pressure inside a tire can trip ABS light in the manner it is in your situation. Dirty or faulty sensor as you mentioned is also likely. Looking forward to hearing back from you. In addition, if larger than original tires were recently installed, this can also trigger your ABS light to illuminate as the magnetic ring and sensor are having a difficult time sending proper signals to the computer. 🧰
Damn, this really works! Thanks Michael. I had a Mitsubishi Mirage 2013, the ABS light suddenly came on after I whack a corner. Checked with a cheap OBD2, nothing detected. Just make sure it's not related to magnetic bearing, speed sensor first.
Will it work if the ABS and TC light is on? If so, will it stay off for good or reoccur? I have a road test tomorrow and my mom just told me that the abs and traction control light is on on her vehicle and it's what I'll have to use at dmv tomorrow. 😭😭
@@kittycatmobay Thanks for watching & it will indeed. After performing this reset procedure, the only way it will come back is if there is an actual faulty part within the system. 😎👍
Oh my! :( it didn't work for my 05 chevy equinox. Abs and tc light on. Do you have other videos of other possible solution for other reasons both lights are on?
@@kittycatmobay Thanks for the update, below is a link to our video discussing common causes. th-cam.com/video/5lgMhKYGuto/w-d-xo.html We also commented on your other reply regarding black negative battery cable. 😎👍
Thanks so much. I washed my jeep yesterday and was wondering if I got some dirt behind the wheels. My ABS light came on and I wasn't sure what to do with it. I will give this a try first. XO
Had new tires installed and 3 days later brake fluid leak from passenger rear line. Brake light came on. Stop in auto shop to have brake fluid added..brake light went off, but then 2 days later a huge amount of fluid dripped out. Then Abs light, brake light, eps light and traction light came on. Got it to a shop fast. Mechanic scan said internal ABS module problem. They ordered part but was delayed for another week. Saw your video, did a reset didn't work. Did it a second time didn't work. Third time did a reset and drove for 40 minutes. Turned car off for Dr appt came out 30 minutes started car NO LIGHTS ON!!!! DROVE HOME PARKED CAR. RESTARTED WENT AROUND THE BLOCK LIGHTS STILL OFF!!! I HOPE THIS CONTINUES! HOPEFULLY SAVED MYSELF A THOUSAND DOLLARS!! THANK YOU SO MUCH! KEEPING MY FINGERS CROSSED.
Wild event you & your vehicle have been through the last few days...😲 We are so happy to hear things have realigned themselves. That sounds stressful & it makes it even more stressful when it happens after having your vehicle serviced by professional companies. We are always here to help answer questions along the way, us DIY’ers need to stick together! Keep us posted over the next few weeks on how your vehicle performs. Side note... we always recommend double checking your tire pressure after having your tires, brakes, or rims serviced. The reason behind this is because too often, vehicle owners are getting a new set of tires and then a few days later having their ABS light illuminate...only to find out that the shop didn’t bring up the tire pressure to the proper psi which leads to the onboard computer detecting the fault of low pressure...leading to ABS light illuminating. Hopefully many stress free days ahead for you Laurie. 😎👍🔧🔩
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. You are very welcome, and there will be many more helpful videos to follow! 😎👍 Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
This worked for me my brake ABS light was on and I needed to get a inspection this month I did exactly what the video said to and it reset everything back like it was. Thank you for your video.
Thanks for watching & we appreciate you reaching out to us. We are hanging out today at the DIY Raptor headquarters watching college football answering all questions for our fellow DIY’ers. We appreciate you sharing this, passing an inspection is important. 😎👍🔧🔩
Son of a gun it worked!!! 2017 Regal turbo with a service Stabilitrack light, did the procedure and it turned off immediately! Thank you very much for this video!
You are very welcome Sharon. Welcome to the DIY Raptor Club. Us DIY’ers need to stick together! We appreciate you sharing your comment. It’s very important to us to reply to our viewers as we enjoy the conversation. Let us know if you have any questions. Hopefully many stress free days ahead for you. 😎👍🔧🔩
Hey bro, your method worked on my bmw e46 m3, where my front right abs valve was stuck in the close position, now the fluid is flowing through the line, you just save me at least 3 grand in parts and labor. Thank you so much!
Dude that’s fucking crazy I disconnected my battery and abs light came on… I did this step by step trick and it worked I love it thank you so much god bless you
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We appreciate that, and it’s awesome this reset worked on your truck. The dealership will unlikely tell you how to do this. That’s where we come in. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
2019 sentra hit a good puddle abs and traction light came on , did reset once worked for a bit till it came back on . I let car dry a bit drove around just reset drove around didn’t come back on . Parked up and drying more currently . Thanks for the info 🙏🏽🙏🏽
Thanks for sharing your experience. Awesome job giving the sensors time to dry, sounds like the water from the puddle made contact with the sensors and made the system act sporadically for a bit. 👍
Very cool & that’s great to hear. We appreciate you sharing this. Let us know if you have any questions, us fellow DIY’ers need to stick together! Enjoy your night. 😎👍🔧🔩
@@DIYwithMichaelBorders Totally agreed on "DIY'ers" need to stick together! Does this work for only Chevy or other car makes? Thanks and keep up the great video's! They are appreciated and necessary when stumped.
@@AFineLineA Thanks for the reply & a few different manufacturers have this reset configured into their vehicles computers. They may have a slight difference in steps. 😎👍🔧🔩
Brother.... Thank u. And thank u for making a quick and easy to watch video, to the point. I'll be checking in frequently to see what new things you have for us
May 9th,2024…. A few days ago I had a check engine light come on my dash 2005 Toyota Sienna used my little FIXD Scanner and I got a P0500 code - Speed sensor A. Got the OEM part from eBay and replaced the bad sensor. Then the ABS light came back on… Thank GOD I came across your video and YESSSSS it did it for me ABS light is gone . Double checked with my scanner and no problems or issue was found … Thanks so much for the video… Blessings!
Thanks for watching and sharing your experience. The benefits of making your projects DIY is powerful. 😁👍 Awesome job making it a DIY project, and we are honored to hear that our video helped you get across the finish line. You can reach out to us any time, the DIY community will is incredible! 🧰
To all who watched that video,this trick only helps to past inspection if u run the car after reset it will pop up again abs light.On mine pontiac grand prix 2002 is worked that way but its work...I was very surprised...Thank you my 😇
Very cool & that’s great to hear. Sounds like you’re back up and running. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
Thanks for sharing, in that case…you have a part internally acting sporadically…meaning working sometimes and not working other times. This is also an indication that the exact part is in its early stages of failure, and will fail completely in coming weeks or months. Resetting system helps trip part to work as designed again but it sounds like it can only work for a short period of time. Having your ABS system read by an OBD 2 scanner may help pinpoint the exact part causing the problem. 👍
Thanks to u, saved USD400 to replace. My Honda Freed 2009 model ABS & Brake warning lights was on after starting engine n "refuse" to turn off. Tried your method 20th April 2024, till today, 25th April.....problem solved. Brgds, from Malaysia
Gotta say, these vids never work for me (not your channel specifically), but this one did! I’ll take a closer look if it comes back on, but we’re good for now! Thanks so much! 🤘🏻😎
I'm not sure if it was from my car sitting for a few hours after driving or if it was your trick that fixed the issue with my 2010 AWD Lexus is250. ABS/Traction control lit up on the Gage cluster OTW home from work tonight. Maybe it'll display again tomorrow, hopefully not. Otherwise thanks!
wow, 2008 dodge caliber srt had the traction and abs lights still on after so many parts were replaced. It didnt work at first, but as soon as i started driving to return it to the garage it cleared and reset and hopefully will stay off now. time will tell. amazing fix. thank you.
Hey Doris, thanks for watching and sharing this. We also want to thank you for taking time out of your day to write a comment on our video, it means the world to us. Let us know if you have any questions.
Worked on my 2015 Freightliner Cascadia. I had to clean the sensor and secure it in the port after a nasty wheel seal replacement. Thank you so much for the information!
Thank you so much ! I woke up to this ABS problem this morning g calling a bunch of places wanting hundreds of dollars just to look at my car. I watched this video did the reset and it works fine now! THANK YOU
@@kevindurante7000 That’s awesome, saving hundreds of dollars just by spending a few minutes and visiting our channel and making it a DIY project is THE BEST!!! Welcome to the DIY Raptor Club! 😎👍
Bill Carini Thanks for watching Bill. Check out our video on replacing the speed sensor and hub assembly on our Chevy Colorado. You may find it very helpful. 👍👍🔧🔩
@@DIYwithMichaelBorders I did already and it is. I just haven't had the cash to do it yet. The radiator has a leak so I'll be doing that here in a couple of days.
@@DIYwithMichaelBorders radiator update... It was a very simple job! 4 bolts on the skid plate, remove lower radiator hose and transmission lines (for automatics). Remove upper hose then fan shroud. Remove grill, which is only clipped in. Out of the 8 I think I have 2 left but zip ties help hold that. Most were broke before this. 2 bolt for AC condenser and 1 for the top radiator mount and it basically slides on up. I admit I got the cheapest one I could find at $65 shipped! My only issue was the left and right end caps that I had to transfer from the old radiator to the new one. Each one is held in at the top with a torque style screw. I broke 2 bits and it didn't even break loose. Out came the grinder and I found new bolts that fit the nuts in the new part. It's a common size so I had them from a past project. Everything is back in and I realize my transmission lines don't screw into the new radiator's trans cooler. After a few minutes of "great... Now what!?" I realized that the new radiator came with the part I needed. That screw end of the transmission lines are held on by little metal clips that are easily removed with something pointed. Almost like a quick disconnect. Popped the new ones on, made sure it was all good to go and the whole job would have taken less than an hour but since I was in no real rush it took about 2 hours. No special tools needed. I think a 10mm & 13mm socket, a ¾inch wrench, Channel Locks and a flat screw driver is all I used.
Bill Carini Bill, this is awesome info & we really appreciate it. Great organized step-by-step guidance. This will definitely be helpful to viewers. 😎👍🔧🔩
Very cool of you to share this, thank you! 😎👍☕️ Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Beyond AWESOME ! Regarding my 2005 GMC Canyon; I had continuing issues with the step down on parking brake circuit malfunctioning with 'Brake Light' on dash cluster flashing on & off occasionally/intermittently....Thought it might be an associated sensor mis-behaving. So glad I didn't take it all apart, because using this/your simple method just ONCE, all now seems to be well. A grateful Thank You, and a very Happy New Year !
Thanks for watching & we appreciate you reaching out to us. From here we recommend disconnecting the black cable from your battery and leaving disconnected for a minimum of five minutes. After five minutes, reconnect cable to battery and start engine. This will allow your system to reset. If your light is still illuminated, you may need to have an OBD scanner read your error codes. AutoZone will read codes for 100% free which will allow us to pinpoint the exact part causing your issues. Welcome to the DIY Raptor Club. 😎👍
Thank You so much for this easy anyone can do "fix!!!" Bought an OBDII tester and that was supposed to be able to clear the ABS light code after doing repairs. It did not clear it. Will try this. Fingers crossed!!! Will check back if it doesn't work.
Hey there my friend. I was having the same issue your having. My scanner did not turn my ABS light out after repair. Did you have any luck with brake trick? Just curious thank you.
@@josecastaing598 Hi, so sorry on a quicker response. Never got a notification. The answer is, "No, it did not work". All kinds of repairs done and light never goes out. On occasion it does flicker. Watched other video's, as well. One suggested checking the sensor ring if dirty clean it, if damaged worn replace it then drive a bit to see if it goes out. Next follow the line to where it hooks up on the tire wheel well wall and undo the clip, check for corrosion, dirt, moisture-water. If any try to clean what you can. If moisture-water let dry fully re-hook and test drive. Hook back up and drive a bit. He said heavy rains or going thru puddles can cause that one to kick up. If still on check all ABS fuses and relays there can be more than one on some vehicles. Pull ONE at a time and inspect. OR if you have a new and good fuse-relay plug it in and if the light goes out after driving a bit you found it. Do all fuses-relays. If all's good plug back in. The video showed some vehicles have three fuses. One regular flat and two boxier type. Use the panel graph to locate the correct fuse(s). He said last but not least was the computer part that is the main reader for the ABS can't remember the name, but is known by parts stores and mechanic's. The problem with that part is it is very, very expensive! Thousand or more depends on the vehicle. Was told could get it cleared by a mechanic for $75-$100. They run it thru a cycle of sorts. Not cheap either and ridiculous that no matter what is done by buying parts and fixing what you think it could be and none of the work shuts it. Most annoying at this point. Have you had any luck at all? If I find anything else I'll pass it on and maybe you could do the same. Best of luck!
Thanks for watching & our ABS light wasn’t triggered by any faulty parts. We just wanted to put together this video to show our fellow DIY’er‘s the reset procedure that will hopefully help them reset their system. Hope all is well Michael. 😎👍🔧🔩
You-sir, are a genius.. On a road trip and this reset my abs system, hdc and transmission fault warnings I got in my landrover when I came out of the gas station.
Thanks for watching, we appreciate that daurie. Have a blast on your road trip. Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰
Awesome! 2002 Chrysler T&C. ABS light with multiple error codes after ABS module replacement. 3 step process worked after driving off. Thank you so much for this fix.
Great to hear, thanks for watching & sharing this. Resetting the ABS system and removing those multiple error codes is awesome. Welcome to the DIY Raptor Club. Hopefully many stress free days ahead for you. 😎👍🔧🔩
Very cool, awesome job making it a DIY project. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Youre awesome I did it myself n worked the first time I did have to drive about two min above 15 as instructed if the light didn't immediately come off ty ty ty
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That’s awesome to hear, and great job making it a DIY project. Definitely a rewarding feeling moving into the weekend. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰
Thank you so much for this video, it worked on my crossfire chrysler..you're a great help..I tried other troubleshooting by turning the wheel it didn't work, again THANK YOU SO MUCH👍🏼
We are happy to help. Thanks for sharing this, and keep that crossfire young and healthy. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Very cool, we are honored to hear our video was helpful. Enjoy that 4-wheel drive. Comes in handy this time of year if you live where cold snowy and icy weather comes around. 😎👍
2005 Honda Civic: My ABS light stays on. I had the OBD indicate the right ABS sensor wire was broken so I bought a new ABS sensor & had the mechanic put it in. After the mechanic put the new ABS sensor in, he told me it was the sensor for the left side, but they “made it work”. However, the light still comes on. I just want to make sure the car is good for a 600 mile road trip (& would prefer to have that ABS light off & the ABS sensor working properly. Thank you
Thanks for watching, definitely understandable. A 600 mile road trip is a long way. Some will say it’s ok, others may say get it fixed…that will be personal preference in the end. We have talked to more people that say it’s ok. Haven’t tried it ourselves. Safe travels when that time comes. 😎👍
Nice, that’s awesome it worked for your vehicle. Thanks for sharing this on your Thursday afternoon. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Good morning ☕️ Awesome job making it a DIY project, the (true thank you) goes to you! 😁 You will continue to benefit greatly by making your projects DIY. 👍🧰
Great info bud ! I have an 08 Ford F 150 Lariat that this trick worked on. I'm hoping it's off for good. I guess I'll find out soon enuff. Thanks again 😎 I forgot to mention, my light went off after the 1st pedal pump. I started it and it stayed off.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. You are very welcome, and we are happy to help. Many more helpful videos to come! 😁👍 Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
My friend , it work , I worry about the Abs light on for couple day .Obd check it no code show up but the light on . Cleared up sensor still no good . I did as your method this morning , the light gone thank very much
If you are buying a car from some small dealer as-is, if I do this and it goes off…. Will it come Back on in a few minutes if there is a real Problem with ABS?? Thx
Thanks for watching. Great question and yes. After completing this reset procedure and taking the vehicle for a test drive, if ABS light illuminates… there is a faulty part or sensor within the ABS system.
"4 MOST Common Causes of ABS Light"
th-cam.com/video/5lgMhKYGuto/w-d-xo.html
Worked
Thanks 🙏
@@lauradart6430
Awesome, thanks for sharing. 😎👍
@@CC-px8dy
We appreciate you reaching out to us, we are always here to help! We answered another one of your comments in greater detail. That might be the one that helps best however just in case, we have attached a link below that discusses the common causes.
th-cam.com/video/5lgMhKYGuto/w-d-xo.html
Please keep us posted C C.
Can't believe that this worked
@@beverlycherry3667
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
That’s great to hear. Hopefully no more sporadic behavior from your ABS system. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
😱OMG!😱 This actually worked on our 2006 Chevy Silverado every time my husband cranked up the truck the ABS Light and the Brake light would come on. He would kill the truck and disconnect the battery for 5-10 mins and it would help for a few minutes but then it would come back on as soon as he started to drive. We just came across this trick of yours and it worked. Thank you so much you not only helped us but you saved us $2K. Thank You so much!
That’s awesome, we appreciate you sharing this. Saving $2k is a big deal, that is a game changer!
Paves the way for a good upcoming weekend. 😎👍
Thank you, Michael Borders! I did what you said in this video, and it worked like a charm. No more ABS and skidding car lights showing. Victory! Many, many thanks. Cheers.
Great to hear Helene, so happy to help. Hope all is well. 😎👍
AND REMEMBER it resets the oil change indicator to "0" just as if you had just changed the oil!
This is awesome! It works! I did the three step process...abs and brake lights still on but once I drove out of the drive way, maybe 10 mph, reset was complete. Excellent peddle, fluids good, etc. and checked prior to reset attempt of course. Thank you so much!!! 🌟👏🏻😃
Very cool & thanks for sharing this. Thanks for watching as well. Enjoy your upcoming week Linda.
😎👍🔧🔩
Same with me!!, Thank you @DIY with Michael Borders, and @Linda Sheffield for your help
I doubt this will work on my vw but might try
@@DIYwithMichaelBordersnever had to mess with abs sensors before but my Honda Accord's front right sensor loses contact once above 30 mph, any suggestions on what this could be?
@@donniev8181
Thanks for sharing your experience, it’s likely that your sensor will need to be cleaned and reconnected…or it may need to be replaced all together.
It's a MIRACLE!! I am a competent individual with a broad knowledge of mechanics and electronics. I was very skeptical. But it does work actually. Twice the problem warning light returned. Third try fixed it permanently. Thanks, Michael. You probably saved me a thousand bucks. No telling how much time and frustration. How simple can a fix be.
Thanks for watching, and thank YOU Rick! Saving a thousand bucks is a great thing!!!! 😁👍
Means the world to us that you took the time to leave a comment.
Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time! 🧰
The same happened with me; The problem warning light returned twice, but how did you fix it permanently?
Maybe this is your chance to do something for someone...
Blessings
My problem kept coming back actually. More consistently each time. Bottom line it didn't work
I could not fix it permanently only temporarily
does this work on a 2011 buick lacrosse cxs 3.6? it is a push button to start it
Thanks bro my mom's jeep brakes were stuck and I've replaced/rebuilt engines and transmissions and never knew this was a thing. She was freaking out and I saved her day thanks to your quick video!
Very cool, awesome job making it a DIY project. Saving your moms day is the best! 😁👍
I just did this on my 99 Subaru. The ABS lights came on this morning and my breaks were working fine so i thought it might have been a fuse- did a quick google search, this video came up, I did the steps and the ABS light is off. So I feel safe, and confident knowing it wasnt a real issue at this time. I really appreciate videos like this that help us DIY and not fuss over things we can easily do ourselves. Thanks again!
Awesome job making it a DIY project. You will continue to benefit greatly by making your projects DIY… And we will always be here to help answer questions.
👍🧰
100% WORKED. I did the three steps but the ABS still illuminated. Then i drove 30Km/h, the ABS warning gone. Thanks👍
I got the same problem I got a 20014 buickvreno I got abs do I do this 3 steps .do it works.roland
Thank you very much Mr. Borders. I have a Mitsubishi Outlander V6 (2011) which had this problem. Thanks to your advice, I solved the problem immediately. It worked the first time. Best regards from Lima - Peru.
Hey very cool, and you are welcome. The 2011 Outlander V6 is a pretty cool ride. Hope the weather in Lima is beautiful.
😁👍🧰
God bless you, just bought truck, almost hit ambulance. Just tried it, it fricken worked. Amazing! They wanted 300.ty
Happy to help, thank YOU! We are happy to hear you did not hit an ambulance. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Thank you so much.. I tried this on my BMW and it really worked.. You saved me a trip to the mechanic.. God bless 😊
Happy to help, and great to hear this helped reconfigure your BMW’s ABS system.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
I'm amazed how well this worked on my S10. I was a little skeptical whether this would work but it worked flawlessly. Thanks a lot for posting this.
You are very welcome, and awesome job to YOU for making it a DIY project.
😎👍🧰
I want to thank you, this has been driving me crazy for a year. Iwas ready to replace the abs unit after replacing the upstream O2 sensor. I drove the car (2000 z/28) a mile and they went off and have stayed off. What a relief as i cannot stand lights on the dash. I have been suscribed for awhile but must have missed this at first. Thanks again...
We are so happy to help! That’s awesome that you have performed this procedure to reset your ABS system.
Please reach out to us anytime and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
We DIYers need to stick together! 🧰
Wow!! Hyundai Genesis Coupe 2013! It worked Thank you so much!! My sunroof stopped working in the summer. Completed the steps here to turn off the ABS and ESC dash lights. Took a drive because they didn't turn off right away. They were off when I turned out if my driveway, also the sunroof works again!
That’s the best news we’ve heard all day. 😁👍
Thanks for watching A J, we appreciate it, hope you have an enjoyable and stress free weekend. 😎👍
After the procedure, driving over 50 miles for a few minutes did the trick! Thank you very much.
We are honored to hear, much appreciated. Let us know if you have any questions. 👍🧰
What kind of car?
@@MaraMarieBeauty
Good morning ☕️
This will work on several different manufacturers vehicles. 👍🧰
Awesome, guy, Thanks a lot! It worked!
I just got my passlock/ignition cylinder replaced and all my keyfobs recalibrated and about one week after dropping $500 bucks and one light finally going out, three lights come on: abs, traction, and parking brake all light up and stay lit! Didn't want to drop any more money for a "diagnostic" and two hours in a waiting room.
My 2011 (manual) Colorado chirped at me about 5 times after I pressed the gas like you said and when it started, no issues!
You are very welcome & thanks for watching. That’s great to hear. Saving $500 is a good thing. Hope all is well.
😎👍🔧🔩
Thank you so much it worked
@@DIYwithMichaelBorders How can you turn ignition on with keyfob?
@@Gods-Elect
Thanks for watching, great question. Ensure that key fob is not inside vehicle and can not be reached by vehicles signal.
Press start button which will turn on electrical system and computer without starting engine.
Unbelievable. I have 2012 ford edge and the abs light was on.
3 different places told me that it's the abs module.
I did what you showed and the problem was solved.
That's so much. (From Israel)
@@roei-lavi
You are very welcome, and we are so honored to hear our video was helpful.
😁👍🧰
WOW! It worked. My big brother just installed new battery posts on my car so I was worried that he knocked something loose but he insisted that it probably turned the TCS lights on my dash since the battery got disconnected....and he was right. Thank you for saving me a trip to the repair shop.👍 Oh and I have a Mazda so apparently it is a universal thing 🤷🏼♀️
You are very welcome April, thanks for watching. Welcome to the DIY Raptor Club.
New battery before winter time is a bonus...that’s if you live in an area that gets cold.
Hope all is well. 😎👍🔧🔩
yep, works on cars and trucks. Awesome tip
I knew TH-cam was the place to go first! Thanks, you saved me a trip to the mechanic, and I bet quite a few $$$. Worked on my 07 Golf GTI.
Good morning ☕️ that’s awesome. You are spot on, you saved a good chunk of cash by making it a DIY project. Well done, and thank you for sharing this. 🧰
Thanks Mike, I did the reset on my 2016 Ram, man what a money saver it worked. I wished I saw this video, earlier, almost crashed when the ABS mod failed. Thanks again
Mike, I cant thank you enough. I have tried many other youtube videos and nothing, the brake system is working fine so I came across your video, tried it and it worked like a charm. Very greatful. Thanks so much.
We are very honored to read this, thank you for reaching out. Resetting your system and getting it reconfigured properly is a great way to start the week. 😁👍
You will continue to benefit greatly by making your projects DIY. We are just a comment away if you have any questions. 🧰
Mike, the abs light keeps coming back on? @@DIYwithMichaelBorders
@@steveanderson461
Thanks for reaching back out to us with an update. From here, it might be best to have an OBD scanner read your ABS fault codes to see what exact part is causing your issue.
Below is a link to our OBD scanner tutorial.
th-cam.com/video/DvogiRhGEYk/w-d-xo.htmlsi=qrf0CNBVvEijrsmJ
🧰
Just changed the wheel hub and magnetic strip on my CTS and followed Mike's simple steps. Initially thought "yea right", but it worked. Glad I came across this video.
Thanks for sharing this Doug, we appreciate you watching. We are happy to hear it helped.
Keep in touch, us fellow DIY’ers need to stick together! Enjoy your night.
😎👍🔧🔩
Hi Sir Michael, recently I just have a problem, regarding the ABS,I just watched your video regarding to re set the ABS Light,and I tried it and it works.Thanks for the tips.im here in Kerela India I'm from Philippines.
You are very welcome, thank you for writing us. Hope all is well. 😁👍
Worked like a charm on my 2014 Ford Explorer.. Took me 15 seconds or so. I love you and my wife loves you! Thank you!
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Great to hear, thank YOU for taking the time to share this. 2014 Explorer is a great vehicle. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Done mine and it’s work like a charm. I don’t need to pay 4 1/5 grand for replacement that the dealer want . THANK YOU
Great to hear, you are welcome. THANK YOU, no joke!
Reach out to us any time! 😁👍☕️
Did the trick on my 94 Cavalier Z24 after replacing the master cylinder! Thanks so much. I'm military and have to ship the car from overseas in a couple of weeks, and an ABS light would keep it from shipping.
Good morning ☕️ that’s awesome. The Z24 is a classic, we still have a 1991 Chevy Z24 Cavalier. 😁
Hopefully all goes well with the shipping process, and god bless you for your service. Thanks for taking the time to reach out to us.
😁👍🧰
After changing the wheel hub bearings etc. the abs and traction light came on. I came across this video googling abs. Well Walla after following the 3 steps the lights went right OFF!
NOTE: I did NOT have to do the drive thing.. This worked perfectly Thank you so much for sharing!!! Your Awesome♥️😊
2005 Cadillac SRX V-6
Awesome! 😁
Thanks for taking the time to leave a comment Sharon, reach out to us any time!
Same here, im about to try the reset.
Hi, I am working on a 2011 Buick Enclave. I bought it on IAA Auction in March, had it delivered from the auction site in Fayetteville, Ark. So, expectedly it had a few twiddly issues. Pumped in some freon, works like a champ all summer so far. And a mystery light on the dash, ABS and the traction control skidding car. Brakes worked so I ignored it all summer. An interesting oddity not mentioned in any videos. After I have been parked for a while, on taking off again it will often turn off the ABS/Traction lights. If I just idle around they stay off once I hit 19 or 20 mph they come back on. I did the check engine light thing, but it was very hot that day. 108 so I did not last long with the driveway check.
This indicated a long list of snigglets. amongst them rear left issue with sensor. So, it was not clear if it was sensor or the magnetic ring on the bearing hub. Now that it is cooling off a bit, I will be working on that issue a little closer.
The three presses on the accelerator did not turn off the ABS light, it did its usual of as I was taking off from the drive the doors locked, ABS/Traction lights went off, and at 20mph came back on again.
Now the noticeable change in the system after the three peddle reset. While ABS light was off, the brake peddle did not sink to near the floor and make a vibration to the foot with a noise like stepping on a pigglet. The brake peddle was engaging the calipers near the top as it should after a proper bleeding. After the lights resumed their annoyance mode, the brake peddle was still engaging near the top as it should with no sinking or sponginess, I finished the 4 mile test drive with a big smile. But still need to get to the cause of the ABS. I can probably unbolt the sensor and see if it is coated with steel and brake pad dust, clean it off or more likely just plug in a new one their like 20 bucks and the original is 2011 and due to make buick some more money. The Hub, I am afraid I will have to go to a shop and have it looked at.
So, all that said. Yes, the three peddle reset did improve the situation. Thanks for the tip. Now the TPMS sensors battery is getting weak on the front left. I about had a doodoo in my pocket the other day on the busy highway when that warning light came on. Overnight, it settles down again, but after a few minutes of operation with report a low tire, or disapear. Next step after this comment is order a package of the valve stems with a blue tooth battery powered sensor to install in the tires. One goes lame, they all four are probably close to the time to earn Buick some more money. I found a package of four from someone selling through walmart for like 40 bucks shipped. A tire shop near just asked for a donation to break down the tire and install the sensor. Very nice hard working barely english speaking entrepreneurs.
Again thanks for the tip, I will keep an eye, er foot on the peddle for a few days and see how this new action works out.
@@RickRamo
Thanks for watching and sharing your experience, we really appreciate it. Any update on your findings and status?
We would also recommend ensuring that all of your tires are properly inflated to the safe and required psi.
Low pressure inside a tire can trip ABS light in the manner it is in your situation.
Dirty or faulty sensor as you mentioned is also likely. Looking forward to hearing back from you.
In addition, if larger than original tires were recently installed, this can also trigger your ABS light to illuminate as the magnetic ring and sensor are having a difficult time sending proper signals to the computer.
🧰
Damn, this really works! Thanks Michael.
I had a Mitsubishi Mirage 2013, the ABS light suddenly came on after I whack a corner. Checked with a cheap OBD2, nothing detected. Just make sure it's not related to magnetic bearing, speed sensor first.
Thanks for watching & sharing this, so true, the magnetic bearing & speed sensor are very common causes.
Will it work if the ABS and TC light is on? If so, will it stay off for good or reoccur? I have a road test tomorrow and my mom just told me that the abs and traction control light is on on her vehicle and it's what I'll have to use at dmv tomorrow. 😭😭
@@kittycatmobay
Thanks for watching & it will indeed. After performing this reset procedure, the only way it will come back is if there is an actual faulty part within the system.
😎👍
Oh my! :( it didn't work for my 05 chevy equinox. Abs and tc light on. Do you have other videos of other possible solution for other reasons both lights are on?
@@kittycatmobay
Thanks for the update, below is a link to our video discussing common causes.
th-cam.com/video/5lgMhKYGuto/w-d-xo.html
We also commented on your other reply regarding black negative battery cable.
😎👍
Life saving. Was planning on taking my car to get checked but came across your video and it worked. Thank you so much.
Good morning ☕️ you are welcome.
👍
Thanks so much. I washed my jeep yesterday and was wondering if I got some dirt behind the wheels. My ABS light came on and I wasn't sure what to do with it. I will give this a try first. XO
Very cool & we appreciate you reaching out to us. Hope all is well, enjoy your day.
😎👍🔧🔩
Did it work?
@@jeebus6263 of coarse not , it needs fixing
Had new tires installed and 3 days later brake fluid leak from passenger rear line. Brake light came on. Stop in auto shop to have brake fluid added..brake light went off, but then 2 days later a huge amount of fluid dripped out. Then Abs light, brake light, eps light and traction light came on. Got it to a shop fast.
Mechanic scan said internal ABS module problem. They ordered part but was delayed for another week. Saw your video, did a reset didn't work. Did it a second time didn't work. Third time did a reset and drove for 40 minutes. Turned car off for Dr appt came out 30 minutes started car NO LIGHTS ON!!!! DROVE HOME PARKED CAR. RESTARTED WENT AROUND THE BLOCK LIGHTS STILL OFF!!!
I HOPE THIS CONTINUES! HOPEFULLY SAVED MYSELF A THOUSAND
DOLLARS!! THANK YOU SO MUCH! KEEPING MY FINGERS CROSSED.
Wild event you & your vehicle have been through the last few days...😲
We are so happy to hear things have realigned themselves. That sounds stressful & it makes it even more stressful when it happens after having your vehicle serviced by professional companies.
We are always here to help answer questions along the way, us DIY’ers need to stick together!
Keep us posted over the next few weeks on how your vehicle performs. Side note... we always recommend double checking your tire pressure after having your tires, brakes, or rims serviced. The reason behind this is because too often, vehicle owners are getting a new set of tires and then a few days later having their ABS light illuminate...only to find out that the shop didn’t bring up the tire pressure to the proper psi which leads to the onboard computer detecting the fault of low pressure...leading to ABS light illuminating.
Hopefully many stress free days ahead for you Laurie.
😎👍🔧🔩
Dude thanks so much this works on a 2012 mazda 3 if anyone was wondering!!
Thanks for watching & we are so happy to help. Us fellow DIY’ers need to stick together!
Hope all is well. 😎👍🔧🔩
It fix my 2002 VW Jetta gls. Just followed the steps and poof gone. Thanks a bunch for the video keep up the good work.
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community.
You are very welcome, and there will be many more helpful videos to follow! 😎👍
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
This worked for me my brake ABS light was on and I needed to get a inspection this month I did exactly what the video said to and it reset everything back like it was. Thank you for your video.
Thanks for watching & we appreciate you reaching out to us. We are hanging out today at the DIY Raptor headquarters watching college football answering all questions for our fellow DIY’ers.
We appreciate you sharing this, passing an inspection is important.
😎👍🔧🔩
WHAT KIND OF CAR DO YOU HAVE
@@keunathompson3026
Thanks for watching. In this video, we performed this ABS reset on a Chevy Colorado.
Son of a gun it worked!!! 2017 Regal turbo with a service Stabilitrack light, did the procedure and it turned off immediately! Thank you very much for this video!
Thanks for all your helpful videos! Thank you even more for taking the time to create them and respond to questions!!!! 💕
You are very welcome Sharon. Welcome to the DIY Raptor Club. Us DIY’ers need to stick together!
We appreciate you sharing your comment. It’s very important to us to reply to our viewers as we enjoy the conversation. Let us know if you have any questions.
Hopefully many stress free days ahead for you. 😎👍🔧🔩
Hey bro, your method worked on my bmw e46 m3, where my front right abs valve was stuck in the close position, now the fluid is flowing through the line, you just save me at least 3 grand in parts and labor. Thank you so much!
Awesome, and thanks for taking the time to share this. The BMW e46 m3 is a slick vehicle. Reach out to us any time.
Dude that’s fucking crazy I disconnected my battery and abs light came on… I did this step by step trick and it worked I love it thank you so much god bless you
Just worked on my truck 👍 Wow...thanks...you deserve Credit for sharing pointers/ tips the big guys dealerships won't tell you
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
We appreciate that, and it’s awesome this reset worked on your truck. The dealership will unlikely tell you how to do this. That’s where we come in. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Just tried this on my 2014 Subaru Forester and it worked like a charm. Thank you so much for sharing!
Good morning Angelo, thanks for sharing this. That’s great news and hopefully many stress free days ahead for you.
Thanks for watching. 😎👍
2019 sentra hit a good puddle abs and traction light came on , did reset once worked for a bit till it came back on . I let car dry a bit drove around just reset drove around didn’t come back on . Parked up and drying more currently . Thanks for the info 🙏🏽🙏🏽
Thanks for sharing your experience. Awesome job giving the sensors time to dry, sounds like the water from the puddle made contact with the sensors and made the system act sporadically for a bit.
👍
Your a legend man it worked on my 2015 chevy impala after driving it up the block!
Very cool & that’s great to hear. We appreciate you sharing this. Let us know if you have any questions, us fellow DIY’ers need to stick together!
Enjoy your night. 😎👍🔧🔩
@@DIYwithMichaelBorders Totally agreed on "DIY'ers" need to stick together! Does this work for only Chevy or other car makes? Thanks and keep up the great video's! They are appreciated and necessary when stumped.
@@AFineLineA
Thanks for the reply & a few different manufacturers have this reset configured into their vehicles computers. They may have a slight difference in steps.
😎👍🔧🔩
@@DIYwithMichaelBorders Thank You!
@@AFineLineA
😎👍🔧🔩
Omg it worked with my 2013 Hyundai Sonata!!! Did it from the passenger side with my hand to worked immediately! Thank you
You are very welcome, thanks for sharing this. 😎👍
Brother.... Thank u. And thank u for making a quick and easy to watch video, to the point. I'll be checking in frequently to see what new things you have for us
May 9th,2024…. A few days ago I had a check engine light come on my dash 2005 Toyota Sienna used my little FIXD Scanner and I got a P0500 code - Speed sensor A. Got the OEM part from eBay and replaced the bad sensor. Then the ABS light came back on… Thank GOD I came across your video and YESSSSS it did it for me ABS light is gone . Double checked with my scanner and no problems or issue was found … Thanks so much for the video… Blessings!
Thanks for watching and sharing your experience. The benefits of making your projects DIY is powerful. 😁👍
Awesome job making it a DIY project, and we are honored to hear that our video helped you get across the finish line.
You can reach out to us any time, the DIY community will is incredible!
🧰
Watched it after one year, on my nissan rogue and it worked!!! Thanks.
Awesome Awesome & we appreciate you sharing this. Thanks for watching. Hopefully many stress free days ahead for you.
😎👍🔧🔩
To all who watched that video,this trick only helps to past inspection if u run the car after reset it will pop up again abs light.On mine pontiac grand prix 2002 is worked that way but its work...I was very surprised...Thank you my 😇
@@adrianhenryk5965
Thanks for watching and sharing your thoughts and experience. This reset procedure is great. 😁👍🧰
Thanks a lot man! It worked for me after running it a few miles!
Very cool & that’s great to hear. Sounds like you’re back up and running. Let us know if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
@@DIYwithMichaelBorders okAy well hope mine cut off after a few miles
So happy this worked! I changed out my bad wheel speed sensor and the light stayed on, but as soon as I did this it went away. 2006 Tacoma
Awesome job on both accounts! Let us know if you have any questions.
😎👍
Hey mike, just wanted to give you a big thumbs up man, some of your chevy cruze videos helped me out alot, keep up the good work man. 👍👍
Mathieu Courchesne
We appreciate that & we love TH-cam!
😎👍🔧🔩
Yes it works temporarily for me; The ABS lights went out about two weeks, but after that time, the problem returned... ☹️
Thanks for sharing, in that case…you have a part internally acting sporadically…meaning working sometimes and not working other times.
This is also an indication that the exact part is in its early stages of failure, and will fail completely in coming weeks or months.
Resetting system helps trip part to work as designed again but it sounds like it can only work for a short period of time.
Having your ABS system read by an OBD 2 scanner may help pinpoint the exact part causing the problem.
👍
Need a new car
@@DIYwithMichaelBorders
Thank you very much for your kind and prompt response. This helped me to decide what to do about this small inconvenience.
@@Oscar-ve3ci
We are happy to help. 👍🧰
Thanks to u, saved USD400 to replace. My Honda Freed 2009 model ABS & Brake warning lights was on after starting engine n "refuse" to turn off. Tried your method 20th April 2024, till today, 25th April.....problem solved. Brgds, from Malaysia
Thanks for watching, that’s great to hear. Getting your system reconfigured properly by use of a full reset is a good thing. 👍
Did your method After mechanic reset it for USD20. Advised to change the ABS module if the lights remains. Once Again, TQVVM
As of today, car performing as usual.....TQVVM.....cheers
Yay!! It worked on my 2012 Chrysler 300. Ty so much, what a blessing 🙌
Hey Angela, thanks for sharing this. The Chrysler 300 is an awesome car. Hope all is well.
😎👍🔧🔩
Gotta say, these vids never work for me (not your channel specifically), but this one did! I’ll take a closer look if it comes back on, but we’re good for now! Thanks so much! 🤘🏻😎
Thank you! This worked for me and I drive a Toyota Yaris.
So happy to help & welcome to the DIY Raptor Club. Hope all is well.
😎👍🔧🔩
I'm not sure if it was from my car sitting for a few hours after driving or if it was your trick that fixed the issue with my 2010 AWD Lexus is250. ABS/Traction control lit up on the Gage cluster OTW home from work tonight. Maybe it'll display again tomorrow, hopefully not. Otherwise thanks!
@@KraptainKrunCh
We are happy to help. 👍🧰
Awesome! Thank you so much, it worked for my 98 Buick!
Very cool & we appreciate you sharing this. Hopefully many stress free days ahead for you.
Enjoy your weekend Tammie. 😎👍
wow, 2008 dodge caliber srt had the traction and abs lights still on after so many parts were replaced. It didnt work at first, but as soon as i started driving to return it to the garage it cleared and reset and hopefully will stay off now. time will tell. amazing fix. thank you.
That was awesome! I did need to do this three times but it worked 😊 Thank you so much 👏🏻
Hey Doris, thanks for watching and sharing this. We also want to thank you for taking time out of your day to write a comment on our video, it means the world to us.
Let us know if you have any questions.
Worked on my 2015 Freightliner Cascadia. I had to clean the sensor and secure it in the port after a nasty wheel seal replacement. Thank you so much for the information!
Awesome, we appreciate you watching & sharing this. Good morning to you, hopefully many stress free days ahead for you!!!! 😎👍
Steps seem to have worked… abs light is gone now… Thank You 🙏
Awesome, thanks for watching. And a special thanks to you for taking the time out of your Saturday evening to share this, it means the world to us..
Thank you so much ! I woke up to this ABS problem this morning g calling a bunch of places wanting hundreds of dollars just to look at my car. I watched this video did the reset and it works fine now! THANK YOU
@@kevindurante7000
That’s awesome, saving hundreds of dollars just by spending a few minutes and visiting our channel and making it a DIY project is THE BEST!!!
Welcome to the DIY Raptor Club! 😎👍
2005 Colorado standard transmission . Just did this trick and it worked 👍
Thanks for watching, the 05 Colorado is a great truck. We have enjoyed our 08 Colorado. Let us know if you have any questions.
👍
I just need to do my front left abs wheel speed sensor in my Canyon. Good trick to know though. Thanks!
Bill Carini
Thanks for watching Bill. Check out our video on replacing the speed sensor and hub assembly on our Chevy Colorado. You may find it very helpful.
👍👍🔧🔩
@@DIYwithMichaelBorders I did already and it is. I just haven't had the cash to do it yet. The radiator has a leak so I'll be doing that here in a couple of days.
Bill Carini
Neat, keep us posted, we are here to help with any questions you may have.
😎👍🔧🔩
@@DIYwithMichaelBorders radiator update... It was a very simple job! 4 bolts on the skid plate, remove lower radiator hose and transmission lines (for automatics). Remove upper hose then fan shroud. Remove grill, which is only clipped in. Out of the 8 I think I have 2 left but zip ties help hold that. Most were broke before this. 2 bolt for AC condenser and 1 for the top radiator mount and it basically slides on up. I admit I got the cheapest one I could find at $65 shipped! My only issue was the left and right end caps that I had to transfer from the old radiator to the new one. Each one is held in at the top with a torque style screw. I broke 2 bits and it didn't even break loose. Out came the grinder and I found new bolts that fit the nuts in the new part. It's a common size so I had them from a past project. Everything is back in and I realize my transmission lines don't screw into the new radiator's trans cooler. After a few minutes of "great... Now what!?" I realized that the new radiator came with the part I needed. That screw end of the transmission lines are held on by little metal clips that are easily removed with something pointed. Almost like a quick disconnect. Popped the new ones on, made sure it was all good to go and the whole job would have taken less than an hour but since I was in no real rush it took about 2 hours. No special tools needed. I think a 10mm & 13mm socket, a ¾inch wrench, Channel Locks and a flat screw driver is all I used.
Bill Carini
Bill, this is awesome info & we really appreciate it. Great organized step-by-step guidance. This will definitely be helpful to viewers.
😎👍🔧🔩
Wow. I just tried it on my 2007 Toyota Yaris. Totally works! Thank you so much! You are awesome!
Hey what’s up, that AWESOME!!! Thanks for sharing this, happy new year.
I replaced the wheel speed sensor on my 2015 mercury 300S will this reset the abs system
Very cool & we appreciate you watching. We definitely recommend trying this friendly DIY procedure since you replaced sensor.
😎👍🔧🔩
Completely awesome this worked on a 2002 Honda CRV so you all will know thanks for the info
Very cool of you to share this, thank you! 😎👍☕️
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Beyond AWESOME ! Regarding my 2005 GMC Canyon; I had continuing issues with the step down on parking brake circuit malfunctioning with 'Brake Light' on dash cluster flashing on & off occasionally/intermittently....Thought it might be an associated sensor mis-behaving. So glad I didn't take it all apart, because using this/your simple method just ONCE, all now seems to be well. A grateful Thank You, and a very Happy New Year !
We are honored to read this, and thank you for sharing it on your Thursday afternoon, much appreciated! Enjoy your upcoming weekend.
👍🧰
@@DIYwithMichaelBorders Please let me also Wish You A Very Merry Christmas !🌲
@@RockinProfessor
Very kind of you, and Merry Christmas and Happy Holidays to you and yours.
😁👍
I was searching for a Dodge Ram 3500 Dually reset don’t know why a video of a Chevy Colorado popped up. I did try this however it didn’t work.
Thanks for watching & we appreciate you reaching out to us. From here we recommend disconnecting the black cable from your battery and leaving disconnected for a minimum of five minutes.
After five minutes, reconnect cable to battery and start engine. This will allow your system to reset.
If your light is still illuminated, you may need to have an OBD scanner read your error codes. AutoZone will read codes for 100% free which will allow us to pinpoint the exact part causing your issues.
Welcome to the DIY Raptor Club.
😎👍
Thank You so much for this easy anyone can do "fix!!!" Bought an OBDII tester and that was supposed to be able to clear the ABS light code after doing repairs. It did not clear it. Will try this. Fingers crossed!!! Will check back if it doesn't work.
Hey there my friend. I was having the same issue your having. My scanner did not turn my ABS light out after repair. Did you have any luck with brake trick? Just curious thank you.
@@josecastaing598 Hi, so sorry on a quicker response. Never got a notification. The answer is, "No, it did not work". All kinds of repairs done and light never goes out. On occasion it does flicker. Watched other video's, as well. One suggested checking the sensor ring if dirty clean it, if damaged worn replace it then drive a bit to see if it goes out. Next follow the line to where it hooks up on the tire wheel well wall and undo the clip, check for corrosion, dirt, moisture-water. If any try to clean what you can. If moisture-water let dry fully re-hook and test drive. Hook back up and drive a bit. He said heavy rains or going thru puddles can cause that one to kick up. If still on check all ABS fuses and relays there can be more than one on some vehicles. Pull ONE at a time and inspect. OR if you have a new and good fuse-relay plug it in and if the light goes out after driving a bit you found it. Do all fuses-relays. If all's good plug back in. The video showed some vehicles have three fuses. One regular flat and two boxier type. Use the panel graph to locate the correct fuse(s). He said last but not least was the computer part that is the main reader for the ABS can't remember the name, but is known by parts stores and mechanic's. The problem with that part is it is very, very expensive! Thousand or more depends on the vehicle. Was told could get it cleared by a mechanic for $75-$100. They run it thru a cycle of sorts. Not cheap either and ridiculous that no matter what is done by buying parts and fixing what you think it could be and none of the work shuts it. Most annoying at this point. Have you had any luck at all? If I find anything else I'll pass it on and maybe you could do the same. Best of luck!
So when you turn the key “before” you step on your peddle, why does the light go out?!
Thanks for watching & our ABS light wasn’t triggered by any faulty parts. We just wanted to put together this video to show our fellow DIY’er‘s the reset procedure that will hopefully help them reset their system. Hope all is well Michael.
😎👍🔧🔩
Thank you Michael, worked like a charm. I wonder what caused the issue in the first place.
You are very welcome. 😁👍 possible glitch in the system.
Looking forward to 2024, many more helpful videos to come. 🧰
Brooo, had the car booked for this arvo....did your trick and it worked! Saved us hundreds! You're the mantis!
Thank You Mike! I have a 98 Chrysler town and country minivan... I did the reset and the light turned off right when I started my van. Thanx again!
Very cool & thanks for sharing this. Us fellow DIY’ers need to stick together!
Hopefully many stress free days ahead for you.
😎👍🔧🔩
Thanks for the video! My cars ABS, Esp and Stop lights are getting on. What would be the problem?
Does this work on just about all GM trucks 98-24
Thanks for watching, this works on a wide variety of GM and Chevy vehicles as well as other manufacturer’s vehicles. 👍
You-sir, are a genius.. On a road trip and this reset my abs system, hdc and transmission fault warnings I got in my landrover when I came out of the gas station.
Thanks for watching, we appreciate that daurie. Have a blast on your road trip.
Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time! 🧰
Awesome! 2002 Chrysler T&C. ABS light with multiple error codes after ABS module replacement. 3 step process worked after driving off. Thank you so much for this fix.
Great to hear, thanks for watching & sharing this. Resetting the ABS system and removing those multiple error codes is awesome.
Welcome to the DIY Raptor Club. Hopefully many stress free days ahead for you.
😎👍🔧🔩
IT WORKS !!! I had to do about 5 different times or 3 days. Went out in the morning to start and it was gone. Awesome !!!
Very cool, awesome job making it a DIY project. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Great it works. I just tried it. My abs warning has disappeared
@@DERASTUDIOS
😁👍🧰
Youre awesome I did it myself n worked the first time I did have to drive about two min above 15 as instructed if the light didn't immediately come off ty ty ty
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
That’s awesome to hear, and great job making it a DIY project. Definitely a rewarding feeling moving into the weekend.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Thank you very much! I'm about to call for a mechanic for help.. You just rescued me today! 🤗
You are very welcome, thanks for watching. Enjoy your weekend.
😎👍🔧🔩
Thank you for this! Just worked on my 2017 ram 3500 dually! First shot. Lights went off half way up my street at about 20 mph!
Thank you, very much appreciated. That’s awesome, thanks for writing this. Let us know if you have any questions.
👍🧰
@@DIYwithMichaelBorders yes, I sure will thank you!
@@truckerboibreezy7593
Happy to help. 👍🧰
Thank you so much for this video, it worked on my crossfire chrysler..you're a great help..I tried other troubleshooting by turning the wheel it didn't work, again THANK YOU SO MUCH👍🏼
We are happy to help. Thanks for sharing this, and keep that crossfire young and healthy. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Fixed my 4 wheel drive light flashing problem. Thanks so much!
Very cool, we are honored to hear our video was helpful. Enjoy that 4-wheel drive. Comes in handy this time of year if you live where cold snowy and icy weather comes around.
😎👍
2005 Honda Civic: My ABS light stays on. I had the OBD indicate the right ABS sensor wire was broken so I bought a new ABS sensor & had the mechanic put it in. After the mechanic put the new ABS sensor in, he told me it was the sensor for the left side, but they “made it work”. However, the light still comes on.
I just want to make sure the car is good for a 600 mile road trip (& would prefer to have that ABS light off & the ABS sensor working properly.
Thank you
Thanks for watching, definitely understandable. A 600 mile road trip is a long way.
Some will say it’s ok, others may say get it fixed…that will be personal preference in the end. We have talked to more people that say it’s ok. Haven’t tried it ourselves.
Safe travels when that time comes. 😎👍
Worked on my Hyundai i30! The lights came on after I ran over a small pothole, thought something was damaged, but all good now. Thx.
You are welcome, thanks for sharing. Looking forward to 2024, many more helpful videos to come! 🧰
I followed the simple steps and Voila! It worked Abs light off. Now just the brake light
Nice, that’s awesome it worked for your vehicle. Thanks for sharing this on your Thursday afternoon.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Worked on an elderly ladies Lexus that was stuck in the drive thru of a jack in the Box, thank you
@@Dragon71-ic3wz
You are welcome! 😁👍🧰
Just fixed my 2002 Gmc Sierra. Thank you!
Good morning ☕️
Awesome job making it a DIY project, the (true thank you) goes to you! 😁
You will continue to benefit greatly by making your projects DIY.
👍🧰
Great info bud ! I have an 08 Ford F 150 Lariat that this trick worked on. I'm hoping it's off for good. I guess I'll find out soon enuff. Thanks again 😎
I forgot to mention, my light went off after the 1st pedal pump. I started it and it stayed off.
Did the light stay off??
@@getoboy4085 Nope !
This worked absolutely. You are a genius. Thank you so much for your help.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
You are very welcome, and we are happy to help. Many more helpful videos to come! 😁👍
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Does this work for all cars?
My 2003 1500HD said “oil life reset” when I did this.
I needed that too 😂 but I still need to reset the ABS
My friend , it work , I worry about the Abs light on for couple day .Obd check it no code show up but the light on . Cleared up sensor still no good . I did as your method this morning , the light gone thank very much
You are welcome, and a special thanks to you for taking the time out of your Tuesday morning to share this, it means the world to us.
Yes, it worked, I followed the same process and engine indication light gone. Thanks
2012 impreza - works like a charm. Thank you!
Awesome, thanks for sharing this. Hope you’re having a great weekend.
👍
Just did this on my 05 Tahoe...
IT WORKED...!!!
THANKS... SUBSCRIBED...!!!
Your the man. What’s funny is this is the exact process to reset my oil light on my wrangler.
Neat, we appreciate you sharing, that makes it convenient. 😎👍
If you are buying a car from some small dealer as-is, if I do this and it goes off…. Will it come
Back on in a few minutes if there is a real
Problem with ABS?? Thx
Thanks for watching. Great question and yes. After completing this reset procedure and taking the vehicle for a test drive, if ABS light illuminates… there is a faulty part or sensor within the ABS system.
@@DIYwithMichaelBorders Thank you so
much! And thank you for sharing. Great video!
@@kem.4274
😁👍