Master positioning sensor is on after cut. Either your cutter has stalled (open the master maker and slide the white plastic piece back to your left) master debris is caught up in the clamp it take away, or the sensor is neither dirty or bad.
*the master roll has running out *Master making unit upper cover set switch off and on *Master making unit upper cover open and close *Test mode on and enter the code 557
537 Print drum failed to stop at Position-B. 582 Print drum angle cannot be detected even though the Position-A sensor detected the Print drum 3 times.
मशीन का मास्टर रोल निकालें फिर मशीन का ड्रम निकालें अब एक A4 size do. पेपर लें पेपर को मास्टर वाली जगह पर लगाए और धक्का दे शायद मास्टर का टुकड़ा फस गया हो तो निकल जाएगा अब सब चीज वापस मशीन को स्टार्ट करें और रिसेट मुझे आशा है कि आप की प्रॉब्लम ठीक हो जाएगा
Sabse pahle ink toner ke pass Jo sensor Laga Hi usko saaf kar le fir agar aap duplicate towner use karte hain to aap use band Karen aur riso ka original toner Laga de fir machine ko test mod mein kare or 888 code entere kar start kare or 200/300 print Karin fir powar off karke on kare
Machine mein toner check Karen correct laga hai ya nahin toner ke upar chip lagi hoti hai use saaf kar le dekhe ki koi ink to nahin hai use per check kar toner dobara lagaye
Good
Good 👍
Nice
👍🙏👍
Hello could you help me? I have a Riso Comcolor 3110, with this error W003-1011-1
No paper loaded (all trays). What I can do?
A16-525 error. master stencil didnt feed at drum unit. Master stack at master section. maybe the sponge roller are worn out or not??am I right?
Master remove from the print cylinder and test mode on enter the code 887 press the start key and solve your problem
Good day sir how about paper jam blink 2 and ink cartridge
Machine ka Model name kya hai
Sir. Cylinder locked can't open what should I do?
Riso cz 180
On the test mode and enter the code 888 and start the machine and on of switch solve your problem
Second hand dupicator kidaikkuma
Hello. Bisakah kamu membantu saya. Mesin riso cz180 error P-02-400. Feed tray malfungsi
Ink overflow
Test mode on and enter the code 888 and press start key print paper 100
My errors are p-13 and 205 machine is riso 200e
Master positioning sensor is on after cut. Either your cutter has stalled (open the master maker and slide the white plastic piece back to your left) master debris is caught up in the clamp it take away, or the sensor is neither dirty or bad.
Very helpful 👍
Sir can you come and repair my printer
I will pay you sir.
Assam Guwahati
Sir West mastar ka error aa raha he help me
Sir master jaam nahi hat Raha hai
J08
Hi cz 180 maintenance call no 2 and ink red light on both light on please help?
Test mode on and enter the code 887 and press start key solve your problem
C-02 and-253 errors came what's the problem plz help
*the master roll has running out
*Master making unit upper cover set switch off and on
*Master making unit upper cover open and close
*Test mode on and enter the code 557
Gajab
Riso macine ka drum fas jaye to kya kare
888 code entere kar ke machine run ho jayegi fir off karke on karna
p-1-537 error code solution plz ...
537 Print drum failed to stop at Position-B. 582 Print drum angle cannot be detected even though the Position-A sensor detected the Print drum 3 times.
Jor se to bolo
534
Duplicate ink this error code - 534
P-03-502 error
मशीन का मास्टर रोल निकालें फिर मशीन का ड्रम निकालें अब एक A4 size do. पेपर लें पेपर को मास्टर वाली जगह पर लगाए और धक्का दे शायद मास्टर का टुकड़ा फस गया हो तो निकल जाएगा अब सब चीज वापस मशीन को स्टार्ट करें और रिसेट मुझे आशा है कि आप की प्रॉब्लम ठीक हो जाएगा
عندي السلندر لم يخرج حاشر
Test mode on and enter this code 888 and start
Sir please this error my Riso = D-04 - 560 for Ink error So please Help
Sabse pahle ink toner ke pass Jo sensor Laga Hi usko saaf kar le fir agar aap duplicate towner use karte hain to aap use band Karen aur riso ka original toner Laga de fir machine ko test mod mein kare or 888 code entere kar start kare or 200/300 print Karin fir powar off karke on kare
Machine mein toner check Karen correct laga hai ya nahin toner ke upar chip lagi hoti hai use saaf kar le dekhe ki koi ink to nahin hai use per check kar toner dobara lagaye
513
Ink overflowing
Test mode on and enter the code 888 and start or 200/300capy print
560
Ink not support clean the ink toner section
@@techprinting639
thank you
P-14-125 ERROR RISO PLEASE SIR
Scanner is not working please check you scanner connection and clean section
@@techprinting639 ok thank mister
@@techprinting639 please help mr... no.8 in indicator a red blink
my print riso 331A
Codes erreurs p-12-305
Master HP sensor is not working please check the master HP sensor and HP chip and start the machine