I had a lot of old pipes and rebar to cut up and from what I read th-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Flow of wire 1. commutator slot 2. Armature slot 3. commutator slot 1 1 to 6 2 2 2 to 6 ??? Continue till all slots are finished. You can explain without uttering a single word. You have got knowledge. Thanks for sharing. Ashok. Bangalore
Mark commutator slots as C1 C2 .....C24 Mark CLOCKWISE DIRECTION Armature slots First Mark A1 position with respect to commutatir slot. Mark A2 A3 .....A12 CLOCKWIRE DIRECTION
bilangin mo lang yong wire na nasa ibabaw single coil a or b kahit saan doon tunkabin mo at putulin at bilangin mo puro 22 na bilang nyon sa bawat isang commutator bar.
nag umpisa ako yong hindi pa ako marunong mag rewind ng armature sinunog ko yong armature kinuha ko yong bilang at diagram at size ng wire at model ng grinder nilista ko sa notebook at binaklas ko isa isa pero hindi na puwede gamitin ang armature na nasunog ko na kasi nagpupulbos dapat yong hindi na sunog at kung ano yong diagram na nabaklas ko ay dapat ganon morin ibabalik para hindi siya mawala sa balance nya at kung maari dapat bago commutator minsan kasi may grounded na commutator.
@@cdltek bos, sinubokan ko mag rewind, iba ang brand. Kinoha ko lang ang turns/slot at size ng wire. At ginaya ko ang ganyang process sa pag rewind mo. Ang kinalabasan ay baliktad yong ikot nya. Paano kaaaya yun boss?
the wire size should be 28 and the number is 22 all the commutator bars check the commutator if grounded and should be concentrated rewinding follow the diagram.
I had a lot of old pipes and rebar to cut up and from what I read th-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
the best tutorial video po idol..dami ko natutunan sayo.thank you...
Galing Sir..Salamat sa napakalinaw na TUTORIAL..Saludo sayo Sir..
Thanks a lot malaki naitulong skin ng video,more power and god bless
Sir maganda video mo nakakatulong, more videos pa sir, katulad ng pagaayos ng mga power tools. Salamat po
sesinize nefesinize elinize emeyinize sağlik TÜRKİYEDEN selamlar saygilar
Thank you ,very good video
Boss more power to your channel ask ko lng ilang turn din ung stator windings nyan tnx
a real video tutorial big thumb up
Talagang my matutonan ang lahat ng manuno0d dito idol
Parabéns professor
Nice video master,lage akng nka abng sa mga video mo 🙏🙏🙏
salamat sa suporta.
From Indonesia : winderfull goodluck, Brother
Flow of wire
1. commutator slot 2. Armature slot 3. commutator slot
1 1 to 6 2
2 2 to 6 ???
Continue till all slots are finished.
You can explain without uttering a single word.
You have got knowledge. Thanks for sharing.
Ashok. Bangalore
Foi a melhor explicacao até hoje
Молодец! Понял даже без знания языка !!
Bos panu Pag grounded ung commutator kailangan paba irewind na.
San maka tipid boss sa rewind or bili Ng bagong armature
Good am sir un sa stanley grinder parehas ba ng pag rewind nyan concentrated din ba.
Boss nakalas ko na winding ng makita router ko. 17 turns tapos #27. Pwede ba gawing 20 turns #27
Magkadugtong ba ang wire ng A at B wala bang putol yan
idol lahat po ba brand ng grinder ganyan ang process salamat po godbless
Master every brand ba NG power tools iba iba ang slot pag magrerewind
Excelente explicação e bom trabalho realizado
Sir tanong lamang po anong varnish po gamit nyo.. thank you po.
sir lahat ba ng bosch ganyan diagram kahit yung slim type
Lahat po ba ng Armature ganyan ang diagram?
good job.💪👍
Sir kaya pabang ayosin grinder ko? nangamoy sunog sa armature nya, uminit.. Tapos namatay na di na umandar..
Boss san nakakabili ng murang communtator bar?mahal kc sa online
Pwede puba dagdagan ng masmaraming ikot para maging lower speed at higher torque sir?
Babaran mo Ng wd-40 at Hindi parin palitan n Ng drill chuck yan
@cdltek bago po sir nabili ko Plano ko lng po I rewind sa masmababang rpm para sa polishing
Angle grinder Bosch Gws7-115 armature winding data
Pwede magtanong kong san pwede magpagawa ng power tools?
Lovely
Sir san kau nakakbili ng commutator need ko ng 22 bar
Saan Po Ang shop nyo sur
nice vedio
sir tanong lang po...pano po malalaman kung gitna sya..?? i mean ano pi palatandaan
bro tatanong ko lg kung staitor ang damage nakarab din sa carbon
Hindi naman.
gud pm sir pwede ba malaman ang zise ng magnitic wire ng air blower maxel brand
Master ano prob pg nainit at mabagal ung ikot ng grinder
Sunog na ang armature
hi , wire size is 0.28 mm or 28swg = 0.376 mm ? please
Mark commutator slots as C1 C2 .....C24 Mark CLOCKWISE DIRECTION
Armature slots First Mark A1 position with respect to commutatir slot. Mark A2 A3 .....A12 CLOCKWIRE DIRECTION
boss ask klng saan nagpaparewind Ng armature
Sir saan ba location ng shop mo?
Nice video and nice explain I am from sri lanka please translate in English
Bossing ano size ng wire?
Good demonistration
Sir saan nka dpndi kung ilang turns ang rewind,,i mean pnu calculation nyan?
sir saan nakakabili commutator?
Boss... tanong kulang paano pag sira n ang stator...
I test mo lang sa resistance
Idol San pwede mag aral nyan.?
Sa mga gumagawa rin ng mga powertools.
gud day Sir, pwede po magpapagawa sayo
ustat burayakadar herşeyi anladik ama geriye kalan kisimi nasil yapaçağiz ozaman bu vidiyonun bir anlami yokki saygilar
sir 22 b lahat ng ikot sa lahat ng brand ng armature
Magkakaiba
boss paano mo nalaman ang number of turns na 22 at size ng wire basi doon sa pagsukat mo ng slot. boss salamat sa pagbabahagi ng iyung kaalaman
bilangin mo lang yong wire na nasa ibabaw single coil a or b kahit saan doon tunkabin mo at putulin at bilangin mo puro 22 na bilang nyon sa bawat isang commutator bar.
dapat may panukat ka rin ng wire dapat pag sinukat mo yong hindi pa nabalatan yong coil.
nag umpisa ako yong hindi pa ako marunong mag rewind ng armature sinunog ko yong armature kinuha ko yong bilang at diagram at size ng wire at model ng grinder nilista ko sa notebook at binaklas ko isa isa pero hindi na puwede gamitin ang armature na nasunog ko na kasi nagpupulbos dapat yong hindi na sunog at kung ano yong diagram na nabaklas ko ay dapat ganon morin ibabalik para hindi siya mawala sa balance nya at kung maari dapat bago commutator minsan kasi may grounded na commutator.
@@cdltek bos, sinubokan ko mag rewind, iba ang brand. Kinoha ko lang ang turns/slot at size ng wire. At ginaya ko ang ganyang process sa pag rewind mo. Ang kinalabasan ay baliktad yong ikot nya.
Paano kaaaya yun boss?
muito bom sou brasileiro
boss, patulong naman please pag 16 slots at 32 segments. diko natandaan sa pag baklas ko parang may 7 turns at 12 turns na coil
ano ba yan ni rewind mo grinder b.ayan
@@cdltek boss Dewalt na circular saw,
iba ang size ng.coil nyan at diagram
minsan kasi kung ano lang yong pinapagawa sa akin ayon lang yong naa upload ko.
@@cdltek maraming salamat boss, very informative ang video mo, madami ang matututo dito..
👍✋
👍
paano bro mag linis ng almature
Lihain mo lng yong commutator manipis na liha linisin din yong gilid ng commutator bars.
Wala kaba sa makita nah angle grinder sir...yang bosh hindi bah pwede sa makita yan sir
Wire no. On swg, plse. Tell
size of wire number 28
@@cdltek myself rewind 6 100 armeture 30 swg.21 turn per coil, and its run few month and internally short the armeture ,why sir?
the wire size should be 28 and the number is 22 all the commutator bars check the commutator if grounded and should be concentrated rewinding follow the diagram.
@@cdltek mr do you mean 28awg = 0.3211mm or 28 swg = 0.376mm or just 0.28mm ? my regards
Sir paano po mag tanggal ng dting coil, mhirap po mag tanggal..
Di ko ma intindihan Yung drawing mo brad..ayosin mo brod Kasi di ma kuhakuha
If possible explain in english
Please english translate
Paano nman mag convert rewind ng 11o volt armature at stator to 220 volt
Pag may nag pa convert sa akin ipopost ko yon. Irerewind ang armature at stator.
বাতেন মূনশি
Plz if possible explanation give in English