Just converted one side today on a JPC. Just as you suggested, I run an MBITR on one side and only really need one side to open. Thanks for the video. Helped me make sure I wasn’t jacking it up. I left the carbon fiber strip in place. The only thing I have to work out is a mag pouch now sticks out a little farther than I like; I run soft armor on the sides so I’ll play around with it a little more. Again, thanks for the video and tips!
Just an update. The instructions to install states that once the velcro is removed you actually use the opposite end of the cummerbund to install the tubes. The end you would typically use the bungee to secure on the rear plate bag. So the tidy ends would go to the tubes and you could use a quick flame to remove the loose threads and then reinstall that side to the rear bag using the bungee. Nice and clean. Good video
Is this still the gold standard for Crye tube conversion in 2021? Thinking of making this mod and wondering if there is anything better that you would recommend?
No its not, the actual easiest and most clean way to do it (which ive done on my jpc2.0) is a axl velcro tube male adapter kit for the front plate bag+ a SS molle cumberbund that comes already with the tubes and installs exactly the same has the crye molle cumberbund with shockcord and the read plate bag. Basically you velcro the axl male tubes and simply install the new spiritus cumberbund and you keep you Crye cumberbund intact if you ever want to switch back, zero cutting, zero modifications, and you now have two complete cumberbund for both systems. Also that way uou dont loose any adjustments, if your wearing cold weather gear and need more space you simply spread apart the two axl male tubes apart just like you would with a Velcro cumberbund and then reinstall you placard. Now you have more space and still get in and out fast with the tubes.
So i bought these and dont think theyre very durable. I installed them and 1st time using the carrier was today. I took the carrier off put it in the back of my vehicle and the female tube was coming off. Why? Bc its a repair tube snd not a full tube and rhe material that is attached to the female tube was seperating from the tube. Not bc it was torn but bc the repair tube isnt a full tube and is cut in the middle so u can slide a new one on if u break it. Im ok with using repair tubes of im replacing the oem full tube that was broken. Now i have to worry about the tube coming undone bc the material im that area is lacking so it can slip off. The blaze def systems one from pictures online seem to have enough material to keep it from slipping off
This is like a dumb question, im planning to get a jpc 2.0, on their site it lets me order even tho its out of stock, does that mean I’ll be waiting on lead times or will it block my order, its my first pc so I just wanted to ask, good video nevertheless
I may be a year too late, and maybe my idea is wrong all together. What if we just uninstall and flip the cummerbund backwards, putting the Velcro side on the back of the PC, thus refraining from any alterations. You can Velcro the cummerbund together at the back on top of one another or folded as needed, and still have enough room tie the cummerbund on: double the retention.
Just converted one side today on a JPC. Just as you suggested, I run an MBITR on one side and only really need one side to open. Thanks for the video. Helped me make sure I wasn’t jacking it up. I left the carbon fiber strip in place. The only thing I have to work out is a mag pouch now sticks out a little farther than I like; I run soft armor on the sides so I’ll play around with it a little more. Again, thanks for the video and tips!
Just an update. The instructions to install states that once the velcro is removed you actually use the opposite end of the cummerbund to install the tubes. The end you would typically use the bungee to secure on the rear plate bag. So the tidy ends would go to the tubes and you could use a quick flame to remove the loose threads and then reinstall that side to the rear bag using the bungee. Nice and clean. Good video
Solid feedback man. I’ll be perfectly honest, I didn’t touch the instructions so they may have always said that.
That being said, they’re never in stock.
You other reply isn’t showing up for some reason.
@@EODFish Huh. I just mentioned the option of getting First Spear tube cummerbunds from Spiritus. And, like I said, they’re never in stock.
I will admit I have never had a 119 component in hand but I thought they weren’t Crye compatible while the reverse was possible.
Thank You brother I appreciate your time ... Good chats
Looks great. Will look even better after you take it to the Korean sew shop ladies.
Why would I need to do that?
Good to see another tech.
Always broheim.
Is this still the gold standard for Crye tube conversion in 2021? Thinking of making this mod and wondering if there is anything better that you would recommend?
No its not, the actual easiest and most clean way to do it (which ive done on my jpc2.0) is a axl velcro tube male adapter kit for the front plate bag+ a SS molle cumberbund that comes already with the tubes and installs exactly the same has the crye molle cumberbund with shockcord and the read plate bag. Basically you velcro the axl male tubes and simply install the new spiritus cumberbund and you keep you Crye cumberbund intact if you ever want to switch back, zero cutting, zero modifications, and you now have two complete cumberbund for both systems. Also that way uou dont loose any adjustments, if your wearing cold weather gear and need more space you simply spread apart the two axl male tubes apart just like you would with a Velcro cumberbund and then reinstall you placard. Now you have more space and still get in and out fast with the tubes.
Excellent video, audio is kind of low...
Constant struggle man. That is with external mics and 500% in the editing software.
So i bought these and dont think theyre very durable. I installed them and 1st time using the carrier was today. I took the carrier off put it in the back of my vehicle and the female tube was coming off. Why? Bc its a repair tube snd not a full tube and rhe material that is attached to the female tube was seperating from the tube. Not bc it was torn but bc the repair tube isnt a full tube and is cut in the middle so u can slide a new one on if u break it. Im ok with using repair tubes of im replacing the oem full tube that was broken. Now i have to worry about the tube coming undone bc the material im that area is lacking so it can slip off. The blaze def systems one from pictures online seem to have enough material to keep it from slipping off
This is like a dumb question, im planning to get a jpc 2.0, on their site it lets me order even tho its out of stock, does that mean I’ll be waiting on lead times or will it block my order, its my first pc so I just wanted to ask, good video nevertheless
You will be waiting. AOTAC has them in stock right now.
Do you know of any downside to the Quick Connect tubes? I have a JPC and thinking about adding the Quick Connect tubes.
They don’t ride great over internal radios. They also push usable molle further back which can mean less usable/reachable space.
Do you think this would work with other PCs with similar style cummerbund. For example the velocity systems scarab LT?
Yes, it just depends how aggressive you are prepared to be getting the Velcro off.
I may be a year too late, and maybe my idea is wrong all together. What if we just uninstall and flip the cummerbund backwards, putting the Velcro side on the back of the PC, thus refraining from any alterations. You can Velcro the cummerbund together at the back on top of one another or folded as needed, and still have enough room tie the cummerbund on: double the retention.
You would cover up molle but other than that, have at it I guess. It would also have exactly no give to it.
@@EODFish Very good point. I’m in the market for some tubes for my JPC and these might be it.
Does saber solutions not exist anymore? I can’t find them anywhere
They are supposedly coming back. I’m not sure what happened.
Where to buy that Kit ???
I have the same question
Saber solutions
Tell mythic to upload
Lol. What’s he have cooking?
do you work at mcdonalds
Yes
Hello, I am from Iraq. Can you help me by buying this piece? Thank you very much

No, sorry. I’m much to lazy to do that.