2020 GEAR UPDATE FOR THIS VIDEO. A lot of the information in this video is 5 years old and needed a serious recommendation update below. Starter Interfaces: Audient ID4 or ID14 Motu M2 Steinberg UR12 or UR22 Preamps: Bare minimum is GoldenAge Pre73 mk 2. Cheaping out on preamp isn't worth it. Warm Audio WA12 Neve Portico series Microphones: AT2020 is the only starter mic I recommend at this point. Don't bother upgrading unless you're going to Neumann or have a specific need in terms of polar pattern or frequency response.
so if i wanted to go into voice acting and bought the AT2020, what is the bare minimum that i would have to buy to go with it? its just a bit to wrap my head around.
A note worth noting (and correct me if you feel inclined to): if you are in a room environment that you simply can't treat for reflections or fan noise (such as from your computer fans), a Dynamic mic like the SM57, RE20, SM7B, etc will do a far better job at reducing that background noise. It will not give you as detailed of sound compared to a Condenser mic, but if you get your fancy new AT2020 home and realize that it picks up the next door neighbor's kid's breathing, you'll know why people put so much effort and money into sound treating their room.
If you're having trouble with your room, I'd sort that out rather than throwing more money at a mic. A couple isolation screens make a world of difference. Clearsonic make great ones for about 200 euros or 230 USD which are life savers for dodgy room acoustics
Thank you sir. The entire audio world is very interesting, and I didn't realize it was this intricate. I was one of those people who listened to the 'COD commentators' and originally bought a Blu Snowball. Worst decision ever! The next mic I bought was a Samson C01U, and it works fine but my apartment has a lot of echos. I know that in order to be really professional, I would need a mic that is NOT USB. While I'm not a voice actor, I realize that audio quality is important. A mixer or amp is also something that I would want. Thank you again Mac
Thank god I have access to a recording studio at my college. I don't have to drop like $1000 right away and can instead use that while I piece together my own stuff. Great vids tho, soul. Keep it up.
I saw you put on the AKG C414 in the higher cost bracket, which is great, and has a billion different settings. However with my voice over, I tend to stick to just cardioid, and AKG do a cardioid only version called the AKG C214, which is _much_ cheaper. I've been getting some good mileage out of it so far. ;)
Got here via a shoutout from hbomberguy. Love the tutorials! Subbed and liked! May I ask if there's any plans in the works for a catalog vid for interfaces as well? As a singer I'm pretty familiar with mics and have done some work in studio, but when it comes to recording my own stuff I get easily thrown off by the technicals. I have a Samson Q7 (attempted competitor to Shure58) but I haven't gotten an interface yet and would LOVE a vid like this to get a better idea of my options. Thanks!
some advice just in case anyone actually reads this... the sm7b and re20 are dynamic mics and usually require a big time pre-amp to power.. sometimes you need to buy am extra pre amp like a cloud lifter, but if you are doing any kind of voice acting in an untreated room it is the way to go because condensers will pic up absolutely everything... If you piss your pants while you are in character a hot condenser will hear it.
Holy shit. So I knew I needed a preamp for a while and finally found one that I was willing to buy for experimentation before I threw down the big bucks. So to entertain myself before it arrives I'm watching these kids of videos. What did I buy? ART Tube MP V3. Seems everybody agrees this is the cheapest solution that 1) still makes a difference and 2) allows you to get a taste for what you want in a preamp.
You've made it abundantly clear throughout these "How to be an Online Voice Actor" videos about using an XLR microphone instead of using USB microphones (ESPECIALLY the Blue Yeti) and you even gave some examples of each item to purchase & use. I looked up the items listed in your videos and have a good idea of what to get, but I was both curious and confused about Blue Microphones because of these videos. 1. What's your opinion on Blue Microphones as a company? 2. What do you think of their OTHER products: The Pop, their headphones (Mo-Fi & Lola), preamps (Robbie & The Icicle), shock mounts, and cables? 3. This question is to determine which microphone boom stand we should buy: Is it better to record standing up or sitting down?
As a voice actor I could tell you blue makes some fine mics for the money. The icicle is crap for voice acting, and has a bad converter. There pop filter is fine I guess. The robbie is a solid Pre amp but not really necessary when you get similar quality form a 300$ interface like the audient id14. As for boom stands, mine is from DR PRO and cost like 70$. I think you should spend that much because it provides superior quality and support for your mic. Cheap ones fall over. If you need any help about any of this stuff, I'd be happy to share what I know, take care.
I would’ve been interested, but my weak and odd nasally voice prevents me from doing so. My voice can sound pretty ugly at times that I find that it doesn’t deserve to be speaking into higher end mics. Though I would’ve just been doing simple narrations.
awesome advice! in the past i have been completely dishearted by prices for good microphones and equipment so it was really good to hear about cheaper options and why more expensive ones can be worth it. so glad i decided to come over and check out this channel after watching hbomberguy's video :3
A note for people who don't feel comfortable buying used for whatever reason, financing is an absolutely viable option in the realm of audio. With no credit, I've been able to follow multi-month payment plans on gear as expensive as $800, and could probably finance something even more expensive if I so desired. Do some looking around, plenty of reputable websites that will accommodate you. Just be sure you can handle it!
+RandomReadings I'm good. I subscribed to you a while ago and I was just checking my subscriber feed and saw that you liked this video, which is cool because I helped out with making this, but I didn't even know if you remembered me at all from that project. By the way we got a A+ on that shit, I need to pay you back for that sometime.
+RandomReadings I just did some assistant editing, minor stuff. I didn't write this or anything, that credit goes to SoulBro and Joe Boisits. I mostly do SFM animations for SoulBro. They're not about voice acting but still just as entertaining. How's voice acting? I hope you and your rich voice are doing well and getting work
As an audio engineer, your mic is only as good as your pre amp. Don't splurge on one of the expensive mics in this video if you're gonna run it thru a focusrite. Start with great pre amps, they'll make okay mics sound beautiful. Work up from there mic wise. Love ❤️
There's not many preamps that suck anymore. I.E lots of dedicated preamps while they are relatively quiet when it comes to getting your mic to a usable level it still has roughly the same amount of noise as a decent interface. It just so happens to be able to do so while providing 80DB of gain rather than the standard 50-60DB. Keep in mind that preamps have their greatest signal to noise ratio at their maximum. This is often where their own rating comes from. With a lower gain level, you may have a lower total noise level but you also have a weaker signal. Higher gain = more signal proportional to the self noise. (Behringer UMC202HD and UMC204HD, MOTU M2, and other similar interfaces all offer 50-52DB of gain range at less than -129 dB EIN.) This is by far more than necessary for every Condenser mic you will be using for voice.
A lot of the stuff in this and the first video I learned in college but forgot. Very informative. I got the AT4033 for Christmas last year, but I stick to my Blue Yeti since I only broadcast on Twitch for now. Been thinking of getting an H6 Countryman headset for broadcasting tho.
Hey I'm not sure if you check the comments on this video, but before watching this video I was reading on various websites, and one of the starting microphones that was recommended was SE X1, allegedly it suits a wide range of voices (which is helpful because I don't yet know which voice type I am) and it has a studio bundle, which comes with a shock mount and a reflection filter making it more friendly for rooms that haven't been acoustically treated. at least all of this is what I was given to understand, but seeing you sound like you know what you are talking about I figured I would ask here first.
Great video for aspiring Pro VA, you got a new *Thumbs Up* :D Question: Aside the Shure mics and AT2020. Are MXL mics under $200 (as 990, 770, V67G, etc) are recommended for a begineer home studio recording combo?
Very helpful videos, make more on how to improve voice acting. There are very few HQ resouces on youtube. Please provide tips on improving emotion delivery and not sounding flat. Thanks.
I love the videos, really inspiring and so amazingly done. I just got one question, im sitting here with what it looks to be a National microphone Model: WM-2201 - Panasonic, Matsushita That I found years ago on my dad stuff, it is good to start somewhere??
Hmm... if I had seen this video 4 months ago, I would have gotten the regular AT-2020 over the AT-2020USB+. I started looking into audio recording setups after seeing the setup they have in my Church's media room - so didn't know much before that. I guess I should have done more research before making the buy. Experience teaches wisdom. Disclaimer: Let me point out though, that the AT-2020USB+ is still an awesome microphone for its applications and am still shocked at the quality that comes out of it compared to my previous meteor Mic.
I'm actually about to sell a Blue Yeti. There's electronic hissing being recorded when you use it depending on the length of your USB cord and I don't know if it's just my problem. Also, in order to get a decent quality recording I have to be very close to the mic, which also means people get to hear the sound of my saliva since it picks up everything.
So would you say the RØDE NT2A is better, as good or worse than the SHURE SM7B. Because from what I can tell it seems like the more expensive the mic the better, yet you said that the RØDE is "Just a nice versatile mic to have around" what would you recommend in the price range of £200-£300 for character acting. I've already chosen my interface "FOCUSRITE SCARLETT SOLO Audio interfaces USB" to be precise.
Viewtiful Valentine Like the end of the video said, it all depends on your voice. Do some research on the characteristics on whatever mics you're looking to get.
Hi! I really liked the videos. I still have a question about pre or post-processing in my DAW (ableton). I have a nt2-a and a mobile focusrite 6i6. I'm wondering if you have any tips in setting up an effectchain in for pre or post processing that would be nice and emulating a preamp. Cheers!
Very good video. I've always wanted to record vocals and do voice acting. After doing my research, I bough a Blue Bluebird and a Presonus Audiobox usb. I didn't have much time to use it because my computer ended up breaking a month after I bought the damn thing. Now you say that the Blue Bluebird is good for vocals and not really anything else Could you explain that a bit further? I'm not an expert on sound quality but any character I voiced sounded pretty damn good. I'm more than happy with my purchace but for what I want to do, was it a bad choice?
At2035 is better than the at2020, the at2020 is weaker and has a little bit if hiss while at2035 is completly silent. Its actually a nearly copy of the discontinued at 3035 for 350 bucks. Thats why the at2035 sounds best of all the at2000 series mics
So I'm in a bit of a peculiar situation. High-school me, not knowing any better, got a Scarlett 2i2 and a Blue Yeti Pro, thinking they would be great pieces of hardware. Now they've done alright, but I've slowly realized over the years that they're not that great when compared to other mics and interfaces on the market. Clearly, I need to upgrade. Thing is, I'm in a bit of a tight financial situation, and I won't be able to upgrade both the mic and the interface at once right now. So which would you recommend upgrading first?
Should I start out with the Neewer NW-700 and build on my equipment from there? I'm recording my instrument for online activities, and am stuck with this Samson GO.
Jordan Bonn any, but for some a cheaper one than he listed last video, get the Behringer um2, for something alot of people use, you can try the focusrite series
Would you consider a Scarlett Solo preamp a good paring for a new RODE NT1? That's my planned setup for a first time recorder. Granted I'm mostly going to be using it for singing purposes and I'm a soprano I, but I hope to do some voicework at some point.
The Solo's ok, but at its price range you can do better. You can find a used Scarlett 2i2 or Steinberg UR12/22 for less than $100 on eBay and other sites.
So should I avoid using an SM7b for character acting? It looks like a decent mic but the amount of gain it requires seems a bit excessive. Pre-amp suggestions? I'm looking at an at4060 as well but have been told it's no good for character acting as well.
Shure SM57 or Sennheiser E835? I'd love the Shure for its reliability, but I think the Sennheiser might sound a tad better from the samples I've heard.
Wait so the AT2020 is apparently the thing to get "if you want to spend as little money as possible" however the $99 Shures are "the best thing you can get for under $200; and they're the same price as the AT. I'm assuming the Shures are better by the statement given, but can you/someone clarify which is actually better?
at2020 for recordings and if you can get rid of backround noise. Shure's for live performences and if you have a lot of backround noise. (AT2020 will pick up background noise much more than shures mics but it also has better clarity and netrual sounding tone)
Would a SM57 be alright going direct into a Focusrite Scarlett Solo (basically a 2i2 with separate XLR and TRS inputs instead of 2 combined inputs for like half the cost)? I know you mentioned pre-amps, but I've heard a few people say that the Focusrites generally have pretty decent pre-amps (or at least better than most USB interfaces) so I dunno what to do.
RoboZombie777 Getting an actual preamp is always safer. It isn't good to rely on the built-in pre unless you're paying a lot of money for the mixer/interface.
I wound up buying a BM800 just to get my feet wet. Not even close to being on your list here. While it is a condenser mic, is it really bad for trying to get in to this?
So your personal go-to mic is the SM57, but that doesn't mean that I should cancel my order for the AT2020, right? Would I have to be an audiophile to hear the difference between the 2?
***** No. And the term "audiophile" is only relative to the world of people who sit around and listen to music is ridiculously high qualities, not recording engineers.
soulbrothanumbuh3 Oh, ok. So a preamp is recommended, but do I need it, or could I work with just the audio interface and foam until I get the money for a preamp?
soulbrothanumbuh3 Cool, thanks. One more thing, I'm new to this channel so I'm probably missing something, but what happened to the Comedy Noise LP? Can't find that shit anywhere.
So I just bought the steinberg UR22 mk2 and it's great but I was wondering if I need a preamp or not... I'm using an at2020 for a mic and I'm using it to record rapping/singing vocals. If I should get a pre amp what is a good preamp around the price range of about 200 and under?
Is the AT2035 worth the extra 50$ over the AT2020, also other than the XLR cable what kind of cable do I need to plug the pre amp into my computer? (USB Dual Pre)
Any thoughts on Rode NT1-A and NT1 for VO/VA? The latter one is a tad bit more expensive, but within my available budget. Any thoughts on them, or? Thanks in advance and for some amazing videos!
Personally speaking, I'm starting out with an NT1a. It does pretty well if your voice isn't too high/low or harsh. It won't color your sound in any particular way so it won't sound horrible, but it won't be exceptional either. I've also heard that it's good for recording instruments. But overall, I think you should go for the re-released black version of the NT1. I bought my NT1A cheap on eBay, and I'm planning on getting it modded by Michael Joly.
Thanks for the reply. Yes, I am aiming myself to get myself a black NT1 kit. There is a shop over here that is offering it in a "happy hour"-happening tomorrow, so that shall be nice, I hope. So yeah, NT1 it will be. Now, would MicPort Pro work fine with that, or..?
Sounds awesome that then. Yeah, my friend is selling his Micport Pro to me for about $100, so it's fair and nice that. So a micport pro would work fine with NT1, yeah? Also, would I need anything else in terms of a separate preamp or am I good to go with NT1 + micport pro?
A pre-amp won't be strictly necessary because condensers are really sensitive, even with the gain turned down low. But you'd better invest in some good sound proofing/insulation; Reverb will ruin your VO audio. I also get annoyed with how my NT1A picks up my breathing, but a noise gate takes care of that.
If you have a condenser microphone, the audio interface will provide adequate gain for the microphone and they’ll get the job done. The preamps in an interface like the Scarlett are decent but not amazing. Ribbon and dynamic microphones on the other hand are way less sensitive than condensers and thus need a lot more clean gain that most prosumer interfaces simply can’t provide without introducing a ton of hiss into the recordings. This is where a dedicated preamp would be considered mandatory as not only do these pres have enough gain to power these types of microphones, but they also impart a unique sound signature that really brings the recording to life while also making it much louder and much clearer. For voice over, try to avoid overly colored pres like Neve and pres styled after it. Something like the Focusrite ISA One and Grace M101 are probably the two best ones you can get for under $1000. So do you need a dedicated pre starting out with a condenser? Not really, the pres in a Scarlett or similar interface will more than get the job done. But if you’re truly serious about high quality recording, an external preamp is definitely something worth saving up for, as they definitely make a difference.
Hey, is the Polar Pattern the *only* thing i should think about when trying to do Let's plays in a noisy room? or does Dynamic vs like Condenser also make a difference?
so, AT2020 or the SM57? Are they about level in quality? What i'm going for is basically, voice acting for a web series. But i want it to sound the most like actual voice and not like a recording. Could post processing of the AT2020, ART Tube v3 and the Presonius audiobox be enough to meet this?
The at2020 requires a less powerful pre amp to sound good so that's a better option if you want cheaper. But, the SM57 reduces background noise more, but you need a better pre amp for it.
Reducing the background noise of your room will cost you more than a good pre amp. Thus i would go with the SM57 unless you have a really good room in a house that is in a very quiet area.
Okay I promised I have watched these videos but unfortunately I am really on a budget. My question is simple would it be worth it for me to start of on a fleureon condenser BM-800 with a 48v phantom power pre amp to begin with in voice recording? I can find both quite cheap and I want to know if it would be worth it. Any help is appreciated!
BM-800 probably won't get you any paid gigs. It's fine if you just want to try amateur roles and voice lessons. You'll also need to get a stand for it.
For mics? If you want to get small-time gigs, a lot of vo artists start with the AT2020 or the MXL990. If you look hard enough, you might find them used for $60-$80 online.
im not too into sound (play guitar from time to time), but increased gain usually does that sorta thing? You could try and increase the gain until the static starts, if that is too low, you could try another cable, alternatively twisting the cable around, kinda like when your phone charger is going bad. my guitar cable is kinda like that (should get a new one)
Do you think that using a Blue Icicle instead of an interface still shows off the microphone's audio to it's full quality? Based on the sound test I've listened to, using it didn't make the quality that much better than a USB. :/
A few months ago, I got a Blue Spark microphone and an M Audio M Track interface, but Im thinking of getting a Focusrite Scarlett 2i2. Is that a good interface?
U know what bro... 🤔 UOoooo have opened up my eyeballs the most out of quite a few vids I have tried 2 watch let alone UN-der-STAND’duh... omg 💆🏾♀️🤦🏾♀️ thanks (GramExclusives)@LethalLushisLexus
Hey, I have a bit of a question, if anyone can help it will be appreciated. I want to get an AT2035, however, I've been told that the Scarlett Solo that I want to get too comes with an integrated preamp. Is it good? Is it worth more to get a separate preamp? The Scarlett is an interface too right? I'm sorry, I'm kinda lost. Is the AT2035 with the Scarlett Solo a decent setup to at least start with?
Can you really connect a mic-preamp to the audio interface? I have a scarlet 2i2 and im think of getting the art tube mp v3 just to try it out along with my mic.
Marky Chua yes. You plug in an xlr cable in the mic, and then hook it up to the preamp. Then you get another xlr cable and plug one side into the preamp and other side into the interface
2020 GEAR UPDATE FOR THIS VIDEO.
A lot of the information in this video is 5 years old and needed a serious recommendation update below.
Starter Interfaces:
Audient ID4 or ID14
Motu M2
Steinberg UR12 or UR22
Preamps:
Bare minimum is GoldenAge Pre73 mk 2. Cheaping out on preamp isn't worth it.
Warm Audio WA12
Neve Portico series
Microphones:
AT2020 is the only starter mic I recommend at this point. Don't bother upgrading unless you're going to Neumann or have a specific need in terms of polar pattern or frequency response.
so if i wanted to go into voice acting and bought the AT2020, what is the bare minimum that i would have to buy to go with it? its just a bit to wrap my head around.
twitter.com/SoBroNo3/status/1124027259466260481
@The DNP part 5
what do you think of the NEAT King Bee?
Isn't focusrite good for VA too?
Weegee Plays has copied this video completely word for word
This one and the previous video in this series. He's now put soulbro in the description, but it wasn't there before.
he should've promoted his workshop, fixed his videos mistakes, and re edit the whole thing. But he didn't, he took the lazy route.
I've never been so glad to be educated so much
Really Cool: You’re an idiot
Me: Well that’s a turn off
Really Cool: But I’m gonna tell you why and how to fix it
Me: Now that’s hot
Huge thumbs to SoulBrother for this vid; literally the only one I'll watch once a year for a quick refresher. Awesome series, you're a genuine hero
I lost my shit when I saw that Shure mic being used to hammer down a nail. Yup, they're durable alright!
A note worth noting (and correct me if you feel inclined to): if you are in a room environment that you simply can't treat for reflections or fan noise (such as from your computer fans), a Dynamic mic like the SM57, RE20, SM7B, etc will do a far better job at reducing that background noise. It will not give you as detailed of sound compared to a Condenser mic, but if you get your fancy new AT2020 home and realize that it picks up the next door neighbor's kid's breathing, you'll know why people put so much effort and money into sound treating their room.
Very true my friend.
If you're having trouble with your room, I'd sort that out rather than throwing more money at a mic. A couple isolation screens make a world of difference. Clearsonic make great ones for about 200 euros or 230 USD which are life savers for dodgy room acoustics
or just get a dbx 286s ¯\_( ͡° ͜ʖ ͡°)_/¯
Thank you sir. The entire audio world is very interesting, and I didn't realize it was this intricate. I was one of those people who listened to the 'COD commentators' and originally bought a Blu Snowball. Worst decision ever! The next mic I bought was a Samson C01U, and it works fine but my apartment has a lot of echos. I know that in order to be really professional, I would need a mic that is NOT USB. While I'm not a voice actor, I realize that audio quality is important. A mixer or amp is also something that I would want. Thank you again Mac
Peter Sobel what's up man
Thank god I have access to a recording studio at my college. I don't have to drop like $1000 right away and can instead use that while I piece together my own stuff.
Great vids tho, soul. Keep it up.
I saw you put on the AKG C414 in the higher cost bracket, which is great, and has a billion different settings.
However with my voice over, I tend to stick to just cardioid, and AKG do a cardioid only version called the AKG C214, which is _much_ cheaper. I've been getting some good mileage out of it so far. ;)
CreepsMcPasta creeps i love you XD your every where :P
CreepsMcPasta but that's not the reason why it's more money, the 214 and 414 have different capsules....
When creepsmcpasta comments!
I seen him on filthyfrank AND Soulbrother? Amazing
I really hope you continue this I love these vids of yours
Please do more videos like these man, I love learning about this kinda shit, as well as you do it in an entertaining way
love this guy's brutal honesty haha. he doesn't come off as a dick but rather he's raw and real with you on the situation
Got here via a shoutout from hbomberguy. Love the tutorials! Subbed and liked! May I ask if there's any plans in the works for a catalog vid for interfaces as well? As a singer I'm pretty familiar with mics and have done some work in studio, but when it comes to recording my own stuff I get easily thrown off by the technicals. I have a Samson Q7 (attempted competitor to Shure58) but I haven't gotten an interface yet and would LOVE a vid like this to get a better idea of my options. Thanks!
some advice just in case anyone actually reads this... the sm7b and re20 are dynamic mics and usually require a big time pre-amp to power.. sometimes you need to buy am extra pre amp like a cloud lifter, but if you are doing any kind of voice acting in an untreated room it is the way to go because condensers will pic up absolutely everything... If you piss your pants while you are in character a hot condenser will hear it.
Thanks Soulbrotha once again for telling these goobers how to get into the big leagues. You're the hero LPers need but totally don't deserve.
Holy shit. So I knew I needed a preamp for a while and finally found one that I was willing to buy for experimentation before I threw down the big bucks. So to entertain myself before it arrives I'm watching these kids of videos. What did I buy? ART Tube MP V3. Seems everybody agrees this is the cheapest solution that 1) still makes a difference and 2) allows you to get a taste for what you want in a preamp.
I just finished audio production in my college for this semester. Vids like this are gonna be great reminders. Thanks big guy.
***** For you.
KingOfChaos213 Hmm?
You've made it abundantly clear throughout these "How to be an Online Voice Actor" videos about using an XLR microphone instead of using USB microphones (ESPECIALLY the Blue Yeti) and you even gave some examples of each item to purchase & use. I looked up the items listed in your videos and have a good idea of what to get, but I was both curious and confused about Blue Microphones because of these videos.
1. What's your opinion on Blue Microphones as a company?
2. What do you think of their OTHER products: The Pop, their headphones (Mo-Fi & Lola), preamps (Robbie & The Icicle), shock mounts, and cables?
3. This question is to determine which microphone boom stand we should buy: Is it better to record standing up or sitting down?
As a voice actor I could tell you blue makes some fine mics for the money. The icicle is crap for voice acting, and has a bad converter. There pop filter is fine I guess. The robbie is a solid Pre amp but not really necessary when you get similar quality form a 300$ interface like the audient id14. As for boom stands, mine is from DR PRO and cost like 70$. I think you should spend that much because it provides superior quality and support for your mic. Cheap ones fall over. If you need any help about any of this stuff, I'd be happy to share what I know, take care.
quality video i am not a voice actor and dont intend to be but its very interesting to watch these btw if you read this love you voice acting dude
fishsticks428 I know right i have no intention of doing voice acting (although it seems fun) and these videos are so interesting to watch.
I would’ve been interested, but my weak and odd nasally voice prevents me from doing so.
My voice can sound pretty ugly at times that I find that it doesn’t deserve to be speaking into higher end mics.
Though I would’ve just been doing simple narrations.
Educational, quick, and easy to listen to. Thanks!
awesome advice! in the past i have been completely dishearted by prices for good microphones and equipment so it was really good to hear about cheaper options and why more expensive ones can be worth it. so glad i decided to come over and check out this channel after watching hbomberguy's video :3
Why are all my suggestions televangelists
can you make a video on how the environment plays a part in VA? you know like soundproofing and stuff?
If you ever update this video (love it by the way), it would be awesome for us to hear you using each microphone! :)
Doing voice overs and gameplay commentary with the Shure SM7B. It does the job real well.
Didn't know becoming a voice actor also meant becoming a microphone guru
gotta know the tools of your craft
A note for people who don't feel comfortable buying used for whatever reason, financing is an absolutely viable option in the realm of audio. With no credit, I've been able to follow multi-month payment plans on gear as expensive as $800, and could probably finance something even more expensive if I so desired. Do some looking around, plenty of reputable websites that will accommodate you. Just be sure you can handle it!
Thank you! Instead of ranting about mics, I will just direct people to this video from now on.
+RandomReadings Dapper Dan! I'm not sure if you remember me, but you helped me with a school video project by doing voice work like 3 years ago
I do, actually! How are you? ^^
+RandomReadings I'm good. I subscribed to you a while ago and I was just checking my subscriber feed and saw that you liked this video, which is cool because I helped out with making this, but I didn't even know if you remembered me at all from that project. By the way we got a A+ on that shit, I need to pay you back for that sometime.
TabascoSauceBoss
Happy to be of help :)
Do you mind my asking what you worked on? I was actually thoroughly entertained by this series! XD
+RandomReadings I just did some assistant editing, minor stuff. I didn't write this or anything, that credit goes to SoulBro and Joe Boisits. I mostly do SFM animations for SoulBro. They're not about voice acting but still just as entertaining. How's voice acting? I hope you and your rich voice are doing well and getting work
Fuck buddy just heard about the weegee fuckbag. Leaving a like and subscription for your work.
As an audio engineer, your mic is only as good as your pre amp. Don't splurge on one of the expensive mics in this video if you're gonna run it thru a focusrite. Start with great pre amps, they'll make okay mics sound beautiful. Work up from there mic wise. Love ❤️
There's not many preamps that suck anymore.
I.E lots of dedicated preamps while they are relatively quiet when it comes to getting your mic to a usable level it still has roughly the same amount of noise as a decent interface.
It just so happens to be able to do so while providing 80DB of gain rather than the standard 50-60DB.
Keep in mind that preamps have their greatest signal to noise ratio at their maximum. This is often where their own rating comes from.
With a lower gain level, you may have a lower total noise level but you also have a weaker signal. Higher gain = more signal proportional to the self noise.
(Behringer UMC202HD and UMC204HD, MOTU M2, and other similar interfaces all offer 50-52DB of gain range at less than -129 dB EIN.)
This is by far more than necessary for every Condenser mic you will be using for voice.
MXL mics should be always modified to get good result. And the first mod is to change the capsule with a real one .. I mean a one that's not toysh
A lot of the stuff in this and the first video I learned in college but forgot. Very informative. I got the AT4033 for Christmas last year, but I stick to my Blue Yeti since I only broadcast on Twitch for now. Been thinking of getting an H6 Countryman headset for broadcasting tho.
Trash
Hey I'm not sure if you check the comments on this video, but before watching this video I was reading on various websites, and one of the starting microphones that was recommended was SE X1, allegedly it suits a wide range of voices (which is helpful because I don't yet know which voice type I am) and it has a studio bundle, which comes with a shock mount and a reflection filter making it more friendly for rooms that haven't been acoustically treated.
at least all of this is what I was given to understand, but seeing you sound like you know what you are talking about I figured I would ask here first.
Lasse Adriansen engineer I wrote this with says "Yeah don't get 'em [sE mics]"
Okay thanks, thought the price vs the claims seemed a bit rubbish, but I'm glad to have it confirmed.
i know i'm tardy to the party but thank you for making this.
also
B I G
C O O L
It's worth noting that you can get audio interfaces with nice preamps built in.
you can, but unless you're buying really shitty preamps the dedicated device will always beat whatever's on your interface
Excited for this one.
Great video for aspiring Pro VA, you got a new *Thumbs Up* :D
Question: Aside the Shure mics and AT2020. Are MXL mics under $200 (as 990, 770, V67G, etc) are recommended for a begineer home studio recording combo?
Very helpful videos, make more on how to improve voice acting. There are very few HQ resouces on youtube. Please provide tips on improving emotion delivery and not sounding flat. Thanks.
Really appreciate this, man. Thank you so much.
I love the videos, really inspiring and so amazingly done.
I just got one question, im sitting here with what it looks to be a
National microphone Model: WM-2201 - Panasonic, Matsushita
That I found years ago on my dad stuff, it is good to start somewhere??
Huh. I own a Scarlett 2i2 for other reasons, may as well give this a shot then. Good video, as always.
Now if only the money for this expensive equipment just fell out of the sky!!!
Hmm... if I had seen this video 4 months ago, I would have gotten the regular AT-2020 over the AT-2020USB+. I started looking into audio recording setups after seeing the setup they have in my Church's media room - so didn't know much before that. I guess I should have done more research before making the buy. Experience teaches wisdom.
Disclaimer: Let me point out though, that the AT-2020USB+ is still an awesome microphone for its applications and am still shocked at the quality that comes out of it compared to my previous meteor Mic.
This is so helpful THANK YOU!
Nice musical taste bro.
Needed this video...like hella.
I'm actually about to sell a Blue Yeti. There's electronic hissing being recorded when you use it depending on the length of your USB cord and I don't know if it's just my problem. Also, in order to get a decent quality recording I have to be very close to the mic, which also means people get to hear the sound of my saliva since it picks up everything.
why did I buy the Blue Yeti???? thanks for the education...time to upgrade!
I just watch these for the guys voice
So would you say the RØDE NT2A is better, as good or worse than the SHURE SM7B. Because from what I can tell it seems like the more expensive the mic the better, yet you said that the RØDE is "Just a nice versatile mic to have around" what would you recommend in the price range of £200-£300 for character acting. I've already chosen my interface "FOCUSRITE SCARLETT SOLO Audio interfaces USB" to be precise.
Viewtiful Valentine Like the end of the video said, it all depends on your voice. Do some research on the characteristics on whatever mics you're looking to get.
Hi! I really liked the videos. I still have a question about pre or post-processing in my DAW (ableton). I have a nt2-a and a mobile focusrite 6i6. I'm wondering if you have any tips in setting up an effectchain in for pre or post processing that would be nice and emulating a preamp.
Cheers!
Sure hope I didn't make a mistake buying the CAD E100S (using the Zoom H5 recorder as an interface).
Very good video. I've always wanted to record vocals and do voice acting. After doing my research, I bough a Blue Bluebird and a Presonus Audiobox usb. I didn't have much time to use it because my computer ended up breaking a month after I bought the damn thing.
Now you say that the Blue Bluebird is good for vocals and not really anything else Could you explain that a bit further? I'm not an expert on sound quality but any character I voiced sounded pretty damn good. I'm more than happy with my purchace but for what I want to do, was it a bad choice?
Caspetic Paletino Now call me a fuckin asshole or something, but I'm pretty sure voicing characters would fall under vocals.
soulbrothanumbuh3 Oh. I was VERY mistaken. Thank you for clearing that up.
At2035 is better than the at2020, the at2020 is weaker and has a little bit if hiss while at2035 is completly silent. Its actually a nearly copy of the discontinued at 3035 for 350 bucks. Thats why the at2035 sounds best of all the at2000 series mics
Awesome video! I'm going to buy a SM7B with a UR22. Can I use this set-up without getting all that noise or is a pre-amp necessary?
Pre-amp is absolutely necessary for an SM7B. I use one and it sounds terrible without a pre-amp.
Laser Laboy might be a month late, but I would recommend a pre amp
So I'm in a bit of a peculiar situation. High-school me, not knowing any better, got a Scarlett 2i2 and a Blue Yeti Pro, thinking they would be great pieces of hardware. Now they've done alright, but I've slowly realized over the years that they're not that great when compared to other mics and interfaces on the market. Clearly, I need to upgrade.
Thing is, I'm in a bit of a tight financial situation, and I won't be able to upgrade both the mic and the interface at once right now. So which would you recommend upgrading first?
mic, Yeti Pros make you look silly.
Should I start out with the Neewer NW-700 and build on my equipment from there? I'm recording my instrument for online activities, and am stuck with this Samson GO.
you forgot telefunken u47, elam 251 and coper head, manley ref gold, sennheiser mkh 416
Hey Cool, what interface would you recommend for AT2020? I'm ready to get rid of my garbage Blue Yeti and actually get quality recordings for once.
Jordan Bonn any, but for some a cheaper one than he listed last video, get the Behringer um2, for something alot of people use, you can try the focusrite series
What's your opinion on Focusrite?
They have some sets for sale. Are pre-made sets sub par or would they be a good foundation if you changed 1 item?
I went with a dynamic mic and a preamp
Would you consider a Scarlett Solo preamp a good paring for a new RODE NT1? That's my planned setup for a first time recorder. Granted I'm mostly going to be using it for singing purposes and I'm a soprano I, but I hope to do some voicework at some point.
Don't know if anyone is still reading these comments but I second this question.
The Solo's ok, but at its price range you can do better. You can find a used Scarlett 2i2 or Steinberg UR12/22 for less than $100 on eBay and other sites.
It's a good audio interface. Since you don't need any more inputs, it's sufficient. Try to get all this stuff used as it's consistently available.
So should I avoid using an SM7b for character acting? It looks like a decent mic but the amount of gain it requires seems a bit excessive. Pre-amp suggestions? I'm looking at an at4060 as well but have been told it's no good for character acting as well.
How about using a cloudlifter instead of a more expensive preamp for mics like the SM 57/58 or 7B? Would that be sufficient?
Update: the Cloudlifter certainly does the job! Love that little thing! :D
Tenebrismo in part 5 he recommends the cloudlifter
Shure SM57 or Sennheiser E835? I'd love the Shure for its reliability, but I think the Sennheiser might sound a tad better from the samples I've heard.
Wait so the AT2020 is apparently the thing to get "if you want to spend as little money as possible" however the $99 Shures are "the best thing you can get for under $200; and they're the same price as the AT. I'm assuming the Shures are better by the statement given, but can you/someone clarify which is actually better?
at2020 for recordings and if you can get rid of backround noise. Shure's for live performences and if you have a lot of backround noise. (AT2020 will pick up background noise much more than shures mics but it also has better clarity and netrual sounding tone)
Your thoughts on the Rode Broadcaster? :)
Would a SM57 be alright going direct into a Focusrite Scarlett Solo (basically a 2i2 with separate XLR and TRS inputs instead of 2 combined inputs for like half the cost)? I know you mentioned pre-amps, but I've heard a few people say that the Focusrites generally have pretty decent pre-amps (or at least better than most USB interfaces) so I dunno what to do.
RoboZombie777 Getting an actual preamp is always safer. It isn't good to rely on the built-in pre unless you're paying a lot of money for the mixer/interface.
great video!! :)) im experienced with voice accents,where can someone find this type of work or gigs????
If I were you I'd be more focused on the acting side of things, but you can start making money immediately on Fiverr.
Casting call club is one website
I wound up buying a BM800 just to get my feet wet. Not even close to being on your list here. While it is a condenser mic, is it really bad for trying to get in to this?
Did you know that blue made a blue yeti pro has an xlr cable
Yeah and it's overpriced
SBN3 okay that’s a good enough response thanks for the reply also wouldn’t know I would get a response for you
So your personal go-to mic is the SM57, but that doesn't mean that I should cancel my order for the AT2020, right? Would I have to be an audiophile to hear the difference between the 2?
***** No. And the term "audiophile" is only relative to the world of people who sit around and listen to music is ridiculously high qualities, not recording engineers.
soulbrothanumbuh3 Oh, ok. So a preamp is recommended, but do I need it, or could I work with just the audio interface and foam until I get the money for a preamp?
Condenser mics have the sensitivity to not immediately need a preamp.
soulbrothanumbuh3 Cool, thanks. One more thing, I'm new to this channel so I'm probably missing something, but what happened to the Comedy Noise LP? Can't find that shit anywhere.
We had to take it off of bandcamp because it was costing us more money to keep up than it was making. New EP on the way though!
I'm using a tube MP preamp. I should get a better one
I was about to buy a focusrite scarlett kit... it wouldn't work?
Can you do more movie reviews?
A little bit off topic but, for buying a mic stand do I need to becareful about it fitting the mic I use or is everything mostly universal?
So I just bought the steinberg UR22 mk2 and it's great but I was wondering if I need a preamp or not... I'm using an at2020 for a mic and I'm using it to record rapping/singing vocals. If I should get a pre amp what is a good preamp around the price range of about 200 and under?
Is the AT2035 worth the extra 50$ over the AT2020, also other than the XLR cable what kind of cable do I need to plug the pre amp into my computer? (USB Dual Pre)
He mentions that as an extra starter mic in the description of his first video?
Any thoughts on Rode NT1-A and NT1 for VO/VA? The latter one is a tad bit more expensive, but within my available budget. Any thoughts on them, or? Thanks in advance and for some amazing videos!
Personally speaking, I'm starting out with an NT1a. It does pretty well if your voice isn't too high/low or harsh. It won't color your sound in any particular way so it won't sound horrible, but it won't be exceptional either. I've also heard that it's good for recording instruments.
But overall, I think you should go for the re-released black version of the NT1. I bought my NT1A cheap on eBay, and I'm planning on getting it modded by Michael Joly.
Thanks for the reply. Yes, I am aiming myself to get myself a black NT1 kit. There is a shop over here that is offering it in a "happy hour"-happening tomorrow, so that shall be nice, I hope. So yeah, NT1 it will be. Now, would MicPort Pro work fine with that, or..?
Been wanting a Micport Pro myself, but at $200, it's a ripoff. I think it would work great, if you can find it for around $100 or less.
Sounds awesome that then. Yeah, my friend is selling his Micport Pro to me for about $100, so it's fair and nice that. So a micport pro would work fine with NT1, yeah? Also, would I need anything else in terms of a separate preamp or am I good to go with NT1 + micport pro?
A pre-amp won't be strictly necessary because condensers are really sensitive, even with the gain turned down low. But you'd better invest in some good sound proofing/insulation; Reverb will ruin your VO audio. I also get annoyed with how my NT1A picks up my breathing, but a noise gate takes care of that.
0:26 Mike with a mic.
Question. You emphasize pre-amps but the Focusrite Scarlett has a pre-amp. Is this overkill or just stepping up the game?
If you have a condenser microphone, the audio interface will provide adequate gain for the microphone and they’ll get the job done. The preamps in an interface like the Scarlett are decent but not amazing. Ribbon and dynamic microphones on the other hand are way less sensitive than condensers and thus need a lot more clean gain that most prosumer interfaces simply can’t provide without introducing a ton of hiss into the recordings. This is where a dedicated preamp would be considered mandatory as not only do these pres have enough gain to power these types of microphones, but they also impart a unique sound signature that really brings the recording to life while also making it much louder and much clearer. For voice over, try to avoid overly colored pres like Neve and pres styled after it. Something like the Focusrite ISA One and Grace M101 are probably the two best ones you can get for under $1000. So do you need a dedicated pre starting out with a condenser? Not really, the pres in a Scarlett or similar interface will more than get the job done. But if you’re truly serious about high quality recording, an external preamp is definitely something worth saving up for, as they definitely make a difference.
Hey, is the Polar Pattern the *only* thing i should think about when trying to do Let's plays in a noisy room? or does Dynamic vs like Condenser also make a difference?
Dude you're doing lets plays just buy a Samson Go-Mic it really doesn't matter.
so, AT2020 or the SM57?
Are they about level in quality?
What i'm going for is basically, voice acting for a web series. But i want it to sound the most like actual voice and not like a recording.
Could post processing of the AT2020, ART Tube v3 and the Presonius audiobox be enough to meet this?
The at2020 requires a less powerful pre amp to sound good so that's a better option if you want cheaper. But, the SM57 reduces background noise more, but you need a better pre amp for it.
Reducing the background noise of your room will cost you more than a good pre amp. Thus i would go with the SM57 unless you have a really good room in a house that is in a very quiet area.
Any thoughts on the rode procaster (or even podcaster)?
I got a MXL 990 with an ART USB Dual Pre from the previous video. Should I upgrade to a better interface and preamp before I get the Blue Spark?
lyemeep microphone
2:14
What's the interface being used to demonstrate the white noise?
Okay I promised I have watched these videos but unfortunately I am really on a budget. My question is simple would it be worth it for me to start of on a fleureon condenser BM-800 with a 48v phantom power pre amp to begin with in voice recording? I can find both quite cheap and I want to know if it would be worth it. Any help is appreciated!
You need to put money in the room too if you buy a condenser mic.
BM-800 probably won't get you any paid gigs. It's fine if you just want to try amateur roles and voice lessons. You'll also need to get a stand for it.
+PSColdFire okay thanks! Have you got any recommendations?
For mics? If you want to get small-time gigs, a lot of vo artists start with the AT2020 or the MXL990. If you look hard enough, you might find them used for $60-$80 online.
when i raise up my gain i get crazy static in my recording HELP! i have a scarlet, goldage amp and a sm57
im not too into sound (play guitar from time to time), but increased gain usually does that sorta thing?
You could try and increase the gain until the static starts, if that is too low, you could try another cable, alternatively twisting the cable around, kinda like when your phone charger is going bad.
my guitar cable is kinda like that (should get a new one)
What are your thoughts on CAD microphones?
Do you think that using a Blue Icicle instead of an interface still shows off the microphone's audio to it's full quality? Based on the sound test I've listened to, using it didn't make the quality that much better than a USB. :/
+CrasherSurge You're not gonna get a great sound out of a small cheap adapter.
A few months ago, I got a Blue Spark microphone and an M Audio M Track interface, but Im thinking of getting a Focusrite Scarlett 2i2. Is that a good interface?
+Davis Productions save up for a UH-7000
how good ore bad would you say is the h6 from zoom and the mics coming with it?
Would you be willing to do one of these on audio interfaces? Or would that not be worth while?
what mics would you recommend for recording string instruments like violin or cello?
LDCs with sweet high end. Like TLM103 or something
U know what bro... 🤔 UOoooo have opened up my eyeballs the most out of quite a few vids I have tried 2 watch let alone UN-der-STAND’duh... omg 💆🏾♀️🤦🏾♀️ thanks
(GramExclusives)@LethalLushisLexus
Hey, I have a bit of a question, if anyone can help it will be appreciated. I want to get an AT2035, however, I've been told that the Scarlett Solo that I want to get too comes with an integrated preamp. Is it good? Is it worth more to get a separate preamp? The Scarlett is an interface too right? I'm sorry, I'm kinda lost.
Is the AT2035 with the Scarlett Solo a decent setup to at least start with?
Can you really connect a mic-preamp to the audio interface? I have a scarlet 2i2 and im think of getting the art tube mp v3 just to try it out along with my mic.
Marky Chua yes. You plug in an xlr cable in the mic, and then hook it up to the preamp. Then you get another xlr cable and plug one side into the preamp and other side into the interface
I Have A Snowball Mic... Is That Good? (Wait... What Catagory Would That Be?)
It's in the garbage category.
Okay
Nice beta response you betamax bitch.
What does that even mean?
+CooperAnimation s No one knows what it means, but it's provocative. It gets em' goin!
if im taking info from this into account for singing and rapping is there anythign else I should know
Is the rode procaster good for voice over?