Hi, congratulations on starting you business. To make die cut stickers, you need to change the cut settings in silhouette. If you change it from kiss cut to cardstock, it will cut all the way through and give you die cuts. For the sticker sheets in your video, you can do this as well. Change the line color of your actual sticker (the rectangle) and set that line to cardstock. This will give you two cut settings for those. You'll have the peel off kiss cut stickers and then you won't have to hand cut the sheet. Hope this helps. 😊
Hi🍓thank you for your kind msg and advice✨ I'll try cardstock setting which i've never tried, hope it works🥺 I'll keep trying until I get a perfect die cut😭💕 thank you again!!
omg congratss on starting the buisness i wish the best in it and the designs are sooooo CUTE.💕💕Also ive watched some of your videos and you are so underated you have soooo much talent i love all the work i hope you become big someday.
I had the same issue with my silhouette starting out and it ended up being a really silly issue - i didnt have the blade in the machine pushed all the way in when i first installed it, so it never cut deep enough despite many many tries and settings. This was able to fix it and get me the die cut!
hi🍓I'm glad you were able to fix the problem and get it die cut🥺💖 I'm pushing quite hard to install blade but let's see if that's my case too, I can't wait to make die cut stickers so bad!!😂❤️ thanks for your advice 🍓✨
omg I've never related to a video so hard! I bought a silhouette portrait 4 and I've been trying for weeks to get it to die cut! Your sticker sheets are super cute though & I'm rooting for you!
I just found your channel and I love your art style! So cute! I've been looking into starting a similar business and your video has been very helpful, thank you so much for sharing. I love that you're sharing the issues as well as the final results, it's so much more helpful than just showing the end results, thanks again and good luckw ith your business! 😃 (Also, I LOVE the pink aesthetic of your work area 💕)
hi!🍓🎀wow you made my day! thank you so much for your kind words, I really appreciate it! 🥹And if my video is helping you in some ways that would be great, I'll keep making videos💕 I hope your art business goes well too, good luck:)✨thank you again🍓
@@HellzSayzDANCE Thank you sm!!🍓I just started making long videos like this so sometimes I'm overwhelmed but this kind of support really encourage me to keep going💕 Thank you!!:)
Thank you so much for sharing your startup experience! I struggled sooo much with my Silhouette machine and Silhouette Studio. (I cried too 😥) I'm going to try what you did and see if it works for me too. Congrats on starting your sticker shop! Best of luck to you ❤🍓
hi🍓aww thank you for your kind message, and I FEEL YOU so much!! I still wanna make die cut sticker so i'll try to figure out🥲and let you know!! Hope everything works for you too!
I think you need to return cameo and get the cricut explore 3 or any other cricut of your preference. I watched a youtube review video recently where cameo and cricut where compared and basically cameo failed the cutting task all the time compared to cricut, same of what happened to you. Also, the cameo design software is very hard to understand and users tend to have lots of difficulties. I hope you have it figured it out by now, I just came across your channel and love the colors and your style! I hope my recommendation helps you!
@@rossieblaz6045 hi!🍓 thanks for your advice! Actually i was gonna return my cameo but found out that my blade was bad, so I got a new blade and it's working finally😂✨ I would love to own cricut in the future too just to see which works better for my stickers!! Thank you💕🎀
@@lattydesu1285 hi! thanks for your comment🍓 it's my first time owing the printer and i'm not really sure about different inks for stickers😭 Why don't you try printing?
@ichigo1533 Well, i am trying its kinda a bit good, I guess 😭 but it's not printing the color like the pic. it's a bit light. Do you just copy it, or do u customize anything from the printer sitting
Hello I can definitely relate to your struggles. I bought a Portrait 3 and it took me a while to make it work. Problem with the auto blade not cutting, find the right settings… For the the settings, I had success with the one from another TH-camr Dylane Art she has a great tutorial on How to make sticker; you should try her settings
hi!!🍓 i feel you so much😭I thought i was the only one struggling here🥺 But thank you for your advice!! I'll watch her tutorial and see if I can find the solution for me!! thank you 🍓
Hello! Your artwork is so cute!! Congrats on starting your sticker business! 🎉 Did you ever figure out the die cut stickers? I see you were trying different settings like Coated Paper, Photo Glossy, Envelope, Plain Paper, etc., but have you tried adjusting the individual settings themselves? I mean the Blade Depth, Force, Passes, and Speed. At this point you might have better luck trying to change those settings rather than picking presets from the list. I hope you figure it out! ☺
hi🍓thanks for your kind msg and advice!!♡ Yes I have tried blade depth up to maximum same as other settings..🥺😭I don't know if I should get another blade but I'll see how I can fix this🥺❤️ Thank you sm for your subscribe!! I just started everything and your support means a lot to me🍓💕
@@ichigo1533 Hm.. That's interesting. I only have a Cameo 3, but I see that there are so many different kinds of blades for the Cameo 4! Maybe you'll have to try a different blade version. Good luck! 💖
Hi dear I'm so happy to find right motivated video, good luck for the bright future, and im waiting such more content about silhouette cameo 4 cutting machine because I also plan to buy but I'm so nervous, i want to ask you that the silhouette cameo 4 work on ipad or not? If it's work, please share about it in the next video, I'm looking forward to watch, thank You so much for effort of making useful content, love you💙
Hello🍓💖thank you sm for your msg you made my day🥰 Yes you can use ''silhouette go'' on ipad to operate machine but It didn't give me good printing quality nor smooth cutting edge. I don't know if I can use ''silhouette studio'' on ipad but I'll try including these explanation in my next video for sure!! Again, thanks for your love and msg💕🎀
I want to start a small business, but I feel that everything is expensive and difficult🥲. I watched a lot of videos for many manual works, but I am not good at anything at all. I just love graphic design, but Adobe is also expensive🤣.
hi!🍓thanks for your comment and i totally understand you! But try finding your biggest passion and learn about it more deeply︎👍🏻✨everything looks difficult and intimidating when you don't know things to buy and how to get started! I took a whole month just researching about sticker making and I'm enjoying it!! stil have a lots to learn tho☺️ I hope you find something that you enjoy🍓🎀
I couldn't pass it by, you have everything so nice and pretty. If you want the stickers to cut well, you need to find a setting that works for you. When you laminate the paper it cuts with different settings. When I cut stickers piece by piece I choose the setting - cardstock adhesive basked. If I cut laminated I choose in the settings - sticker paper holografig. It's all about the cutting settings, if the problem was in the knife itself you would not be able to cut anything beautifully. I also wanted to mention the picture quality. In the video you show how you resize and rearrange the designs on the procreate. It messes up the image quality terribly. Procreate doesn't know how to maintain clarity when scaling. It is best to change the size in photoshop. But in order to preserve the quality in it, first you need to translate the picture into a smart object. I hope you get over your problems and they won't ruin your mood anymore. Enjoy making the world a more beautiful place.🌼
hi!🍓 thank you so much for your comment I really appreciate it🥹💕 I chose cardstock as you mentioned with my new blade and it seems like it's working perfectly! I'll play with settings more✨ Also as you mentioned, it was bad blade not cutting through my paper, i took your advice and got a new one ( SUCCESS!! ) Thank you for your comment and your warm complements❤️🍓
Hi, congratulations on starting you business. To make die cut stickers, you need to change the cut settings in silhouette. If you change it from kiss cut to cardstock, it will cut all the way through and give you die cuts. For the sticker sheets in your video, you can do this as well. Change the line color of your actual sticker (the rectangle) and set that line to cardstock. This will give you two cut settings for those. You'll have the peel off kiss cut stickers and then you won't have to hand cut the sheet. Hope this helps. 😊
Hi🍓thank you for your kind msg and advice✨ I'll try cardstock setting which i've never tried, hope it works🥺 I'll keep trying until I get a perfect die cut😭💕
thank you again!!
Your aesthetic is so stankin cute 😍😍🤌🏾
omg thank you love❤️🍓
omg congratss on starting the buisness i wish the best in it and the designs are sooooo CUTE.💕💕Also ive watched some of your videos and you are so underated you have soooo much talent i love all the work i hope you become big someday.
hello!🍓thank you sm for your comment:) I appreciate your kindness and support💕I'll do my best creating things and growing as an artist for my dream!🍓
im sooo proud of you 🥹 i love those stickers so much
always appreciate your love and support for what i do💕🍓
I had the same issue with my silhouette starting out and it ended up being a really silly issue - i didnt have the blade in the machine pushed all the way in when i first installed it, so it never cut deep enough despite many many tries and settings. This was able to fix it and get me the die cut!
hi🍓I'm glad you were able to fix the problem and get it die cut🥺💖
I'm pushing quite hard to install blade but let's see if that's my case too, I can't
wait to make die cut stickers so
bad!!😂❤️
thanks for your advice 🍓✨
@@ichigo1533 I hope you are able to figure it out!! 💕💖 good luck!
@@soullaire Thank you💕💕
Congrats on your business. I love my cameo 4 and getting a printer today to try and make stickers.
hi!✨🍓 i'm glad you're loving your CAMEO! It took me a while to handle her properly😂 I'm excited for your stickers too! good luck💕
Congratulations on starting your business journey! your art is adorable! :)
thank you so much for your warm
msg!!💌💕This was my small dream come true moment!!✩.*˚
omg I've never related to a video so hard! I bought a silhouette portrait 4 and I've been trying for weeks to get it to die cut! Your sticker sheets are super cute though & I'm rooting for you!
hi🍓💕oh no🥺it's so hard right?! I'll try to figure out blade setting and let you know, and thank you for your msg!!🍓💖
Te amo mucho ❤❤❤❤❤❤ amazing video, I have watched it plenty of times 😊
Gracias por todo💕💕
I just found your channel and I love your art style! So cute! I've been looking into starting a similar business and your video has been very helpful, thank you so much for sharing. I love that you're sharing the issues as well as the final results, it's so much more helpful than just showing the end results, thanks again and good luckw ith your business! 😃 (Also, I LOVE the pink aesthetic of your work area 💕)
hi!🍓🎀wow you made my day! thank you so much for your kind words, I really appreciate it! 🥹And if my video is helping you in some ways that would be great, I'll keep making videos💕
I hope your art business goes well too, good luck:)✨thank you again🍓
@@ichigo1533 You're welcome 💕😊 I have subscribed and hit the bell for "all", I look forward to seeing more of your videos 💕
@@HellzSayzDANCE Thank you sm!!🍓I just started making long videos like this so sometimes I'm overwhelmed but this kind of support really encourage me to keep going💕 Thank you!!:)
Girl power!!! So beautiful!!!
aww thank you💕🍓🎀
✨🩷So cute congrats on starting an amazing business!🩷✨
omg thank you so much!!💕🎀🍓
Thank you so much for sharing your startup experience! I struggled sooo much with my Silhouette machine and Silhouette Studio. (I cried too 😥) I'm going to try what you did and see if it works for me too. Congrats on starting your sticker shop! Best of luck to you ❤🍓
hi🍓aww thank you for your kind message, and I FEEL YOU so much!!
I still wanna make die cut sticker so i'll try to figure out🥲and let you know!! Hope everything works for you too!
@@ichigo1533 You can do it!!! 😊
Wow, you are so pretty!! I love your aesthetic it's similar to mine as well!!
hi💕are you a strawberry pink girl too?🥰🍓that's awesome! hope you enjoyed my video!
I think you need to return cameo and get the cricut explore 3 or any other cricut of your preference. I watched a youtube review video recently where cameo and cricut where compared and basically cameo failed the cutting task all the time compared to cricut, same of what happened to you. Also, the cameo design software is very hard to understand and users tend to have lots of difficulties. I hope you have it figured it out by now, I just came across your channel and love the colors and your style! I hope my recommendation helps you!
@@rossieblaz6045 hi!🍓 thanks for your advice! Actually i was gonna return my cameo but found out that my blade was bad, so I got a new blade and it's working finally😂✨ I would love to own cricut in the future too just to see which works better for my stickers!!
Thank you💕🎀
Thank u so much for sharing but I have a question so I accidentally put the sublimation ink not the regular ink that you put. So is it bad or not 🥲?
@@lattydesu1285 hi! thanks for your comment🍓 it's my first time owing the printer and i'm not really sure about different inks for stickers😭 Why don't you try printing?
@ichigo1533 Well, i am trying its kinda a bit good, I guess 😭 but it's not printing the color like the pic. it's a bit light. Do you just copy it, or do u customize anything from the printer sitting
@@lattydesu1285 I don't customize anything so far, I am just printing. But sometimes colours are lighter so I'll def try changing printer setting!!✨
Thanks so much this was such a cute video can you tell us where sis you get the pink rack?
hi!!🍓thank you sm for your comment! I got this shelf from Amazon searching up ''pink shelf'' but also you can go check furinno website🎀
Where did you get the pink shelf? It's so cute!!
I just got this from Amazon!! I searched up for ''pink shelf'' and it came up for me!!🎀🍓it's so lovely!!
@@ichigo1533 thank you! I hope I can find it! 🤞❤
Hello I can definitely relate to your struggles. I bought a Portrait 3 and it took me a while to make it work. Problem with the auto blade not cutting, find the right settings…
For the the settings, I had success with the one from another TH-camr Dylane Art she has a great tutorial on How to make sticker; you should try her settings
hi!!🍓 i feel you so much😭I thought i was the only one struggling here🥺
But thank you for your advice!! I'll watch her tutorial and see if I can find the solution for me!! thank you 🍓
Is there a link for the miniso pink drawers? They are so cute!
I tried to find it on website but couldn't🥲i got them in store🥺
Hello! Your artwork is so cute!! Congrats on starting your sticker business! 🎉 Did you ever figure out the die cut stickers? I see you were trying different settings like Coated Paper, Photo Glossy, Envelope, Plain Paper, etc., but have you tried adjusting the individual settings themselves? I mean the Blade Depth, Force, Passes, and Speed. At this point you might have better luck trying to change those settings rather than picking presets from the list. I hope you figure it out! ☺
Subscribed!! I'm excited to see your journey!
hi🍓thanks for your kind msg and advice!!♡ Yes I have tried blade depth up to maximum same as other settings..🥺😭I don't know if I should get another blade but I'll see how I can fix this🥺❤️
Thank you sm for your subscribe!!
I just started everything and your support means a lot to me🍓💕
@@ichigo1533 Hm.. That's interesting. I only have a Cameo 3, but I see that there are so many different kinds of blades for the Cameo 4! Maybe you'll have to try a different blade version. Good luck! 💖
How do I buy your stickers?
Your vibe is so incredibly cute! I'm sure you'll grow into a big TH-camr one day and get all the recognition you deserve! ˚ʚ♡ɞ˚
hi!🍓aww thank you so much for saying that🥹I never give up and trust this process🌸✨appreciate your kind words!!
Hi dear I'm so happy to find right motivated video, good luck for the bright future, and im waiting such more content about silhouette cameo 4 cutting machine because I also plan to buy but I'm so nervous, i want to ask you that the silhouette cameo 4 work on ipad or not? If it's work, please share about it in the next video, I'm looking forward to watch, thank You so much for effort of making useful content, love you💙
Hello🍓💖thank you sm for your msg you made my day🥰
Yes you can use ''silhouette go'' on ipad to operate machine but It didn't give me good printing quality nor smooth cutting edge. I don't know if I can use ''silhouette studio'' on ipad but I'll try including these explanation in my next video for sure!!
Again, thanks for your love and msg💕🎀
@@ichigo1533 aww🫶🏼your welcome😍, waiting for your next video💙
I can't get my silhouette to cut through either 😭
oh no🥺🥺same here...😵i'll try to figure out and let you know!! it's so annoying right😭
I want to start a small business, but I feel that everything is expensive and difficult🥲. I watched a lot of videos for many manual works, but I am not good at anything at all. I just love graphic design, but Adobe is also expensive🤣.
hi!🍓thanks for your comment and i totally understand you! But try finding your biggest passion and learn about it more deeply︎👍🏻✨everything looks difficult and intimidating when you don't know things to buy and how to get started! I took a whole month just researching about sticker making and I'm enjoying it!! stil have a lots to learn tho☺️
I hope you find something that you enjoy🍓🎀
I couldn't pass it by, you have everything so nice and pretty. If you want the stickers to cut well, you need to find a setting that works for you. When you laminate the paper it cuts with different settings. When I cut stickers piece by piece I choose the setting - cardstock adhesive basked. If I cut laminated I choose in the settings - sticker paper holografig. It's all about the cutting settings, if the problem was in the knife itself you would not be able to cut anything beautifully. I also wanted to mention the picture quality. In the video you show how you resize and rearrange the designs on the procreate. It messes up the image quality terribly. Procreate doesn't know how to maintain clarity when scaling. It is best to change the size in photoshop. But in order to preserve the quality in it, first you need to translate the picture into a smart object. I hope you get over your problems and they won't ruin your mood anymore. Enjoy making the world a more beautiful place.🌼
hi!🍓 thank you so much for your comment I really appreciate it🥹💕
I chose cardstock as you mentioned with my new blade and it seems like it's working perfectly! I'll play with settings more✨
Also as you mentioned, it was bad blade not cutting through my paper, i took your advice and got a new one ( SUCCESS!! )
Thank you for your comment and your warm complements❤️🍓