TUTORIAL:How to set up the battery capacity voltage meter? For DIY.

Sorry about the name. lol
It's NOT battery capacitor voltage.
Anyways, don't forget to subscribe and like the video.
#diy #solar #voltmeter #battery #lithium

[@noborders4890]

Great help from ur video.. followed ur instructions and done all settings.

[@solitarysandpiper8491]

setting 6 is calibration... (you have to have a constant and stable 20v source attached), when in menu 6 press and hold the front button, it will calibrate to the 20v source.

[@novelistusonthewater]

thanks man, I was guessing about the same but your video was sure helpful too. Thanks for sharing this !!!!

[@Assimilator1]

Just the instructions I was looking for! Thank you🙂

[@robertoolpindobautista6690]

Thank you to your explanation, now I know how to setting up the battery volt meter capacity...

[@d.d8-vr926]

Nice video. Thank you for taking time to go through everything

[@jpcme2002]

only later I saw that we can ask the seller for the instructions and I ask for it but I don´t need anymore ;) thanks a lot!!!

[@Assimilator1]

Re L,P & F for battery types, I think that actually L is for (flooded) Lead acid batteries as it shows 100% @12.6v (on L2) which is spot on for my 2 Lead EFBs. For P(2) it shows 80% @12.6v and 100% @13v (e.g just after charging for mine, but that'd be right for AGM batteries). Although confusingly I get 100% @12.6v with F too.....

[@carlharn1712]

Blogskie, the number 6 setting is the final setting shown after all the 5 settings had been saved..that's it..
I have the same voltage meter which I bought 3 yrs ago and is attached onto my electric trike...very handy and reliable to check the battery power from time to time...thank you for sharing ...

[@johnnystarspangle2876]

Thanks, I recently ordered one and just found out there is no manual.

[@elitebuildingsolutionllc8736]

I'm saving that video. Tha k you

[@jethsalinas]

What parameters is gel battery for manual settings? My battery capacity indicator doesn't have gel type in choices so i will set it manually just like what you did but i dont know the parameters for gel battery.

[@varios1137]

Excelente, de gran ayuda porque el producto no traía manual.

[@junnyevangelio7801]

How to know what kind of battery category we have?

[@LuckyLucy-e3z]

You're awesome 💯

[@rckavi7398]

Thankyou so much

[@valuum23]

How about Gel battery beacouse i have Gel battery..?? Please reply if you read my comment..Notice me please

[@TechnologieByDani]

Super thanks

[@carolinecrona2481]

Do you have tutorial on how to connect that monitor to shunt and to battery?

[@sizwethando8006]

Can I use it got gel battery 200ah 12v one battery

[@nenun0]

What battery are you using for setting the meter up , is it 100ah ?

[@markmartinez9031]

Sir do have link for manual?

[@gurmejsidhu2711]

Sir namskar , I want to purchase, please tell price

[@Lviv89]

Can battery percentage can be calibrated? 13.2v should be 100%

[@pindibobanel1947]

Yes

[@jpcme2002]

The SOC is BS because the device does not know the capacity of the cells...could be 1A, 2A up to whatever. Is hard to calculate the SOC based only on the voltage... the device try to guess but it´s not accurate

[@jpcme2002]

I check what they try to do and I understand now, when we define the min voltage is the 0% and the max voltage is the 100%... ok ok I see now, it is what it is :)

[@lemon_lime71]

Can this be used to test a AA Duracell battery?

[@adventuresonboard9195]

I got the manual but very confusing

[@VGR176]

Can we use it for 150 ah battery

[@alphacodetech2200]

Pls do you find out about this

[@Assimilator1]

Ah is irrelevant to this meter, it's the voltage that counts, and battery type.

[@cutiepiexd7998]

Bkit kailan iset pa Hindi ba accurate

[@lerycaplatino9167]

Mali po yung tanong niyo. Baka ibig sabihin niyo hinde automatic detect kung ano battery ginamit.😅
And mostly po kapag ganyan seniset talaga..