For Rolls of paper the max size is 12.95x47.24. YOU HAVE TO CUT IT DOWN TO SIZE!!! It will feed the full roll though if you do not cut it down to the size you need.
This was so helpful! I just got my Epson printer and honestly it’s my first printer and that lever I would have not know of without this video! Thank you! Glad you made this video.. and specifically for Epson printers!
I had a heck of a time trying to figure out how to load the 11x17 paper which is why I bought this printer in the first place. Even the "tech" center at Staples, where I bought it from, couldn't figure it out. Thanks you very much Honestly SpinKing!
YOU are a lifesaver!!!! My dad does drawings and bought this EPSON WF-7840 specifically for the 11x17 capability in the tray. However, EPSON does NOT clearly describe how to expand the tray. I was panicking to say the least! So thank you so much for this video, it's the only one that I found that saved us. Take care!!!
Thank You! I get hitched on simple stuff and you let me in very time. Yes, the guide for my lower tray has a spring tensioned release and your video showed it in passing. You are the "1" in the "16600"!
I really appreciate the time and effort that those like you put into sharing knowledge that most would not even think of. This really helped me to use legal with my new wide-format printer but, even more important, your video answered how I will use my custom cut paper, 13x19, for book printing. Thank you so much.
@@HonestlySpINKing I got the Epson WF-7840. I ordered a couple of cases of paper specially cut to 12.5x19 inches, based on it's original size. Then I will use my trimmer to get it to 12x17 for large format book printing. I'm looking forward to printing and binding out-of-print or hard-to-find classics from the European Enlightenment era just to enjoy for my own reading.
Thank you for that. I'm by no means tech challenged, but I was having trouble with tray 2 always being selected to print and all my paper was in tray 1...I now understand how to use the trays, and to tell the printer which one I wish to use for paper source. excellent video that explains well without fluff...thanks.
Thank God this video is still up. I struggled trying to load the 13x19 paper through the rear feed like all said to do. What a FAIL till I saw this vid. Thanks 👍
This was very helpful. I was having trouble printing Legal on a Epson ET 7700. After your video, I took another look and saw I could expand the cartridge. One note. If you do have paper that hangs over, you need to make sure it doesn't end up to far forward or the paper can jam.
For the paper larger than 8x11 how do I properly close the tray. When I close it the paper gets bunched up. Or, it will pull two pages through at once. I tried leaving it open but it states the tray is not properly closed.
Mines to but I think that’s what this video is for!!! I so didn’t know I can adjust the tray 🤦🏾♀️... hopefully that will fix this feeding one at a time crap I hate so much 😂🙏🏾
What model are you using in the video? My new Epson 7840 won't fit 13x19 in either of the two front cassettes. I really don't want to have to use the back-feed as I'd have to rotate it off the wall every time I wanted to use it.
Thanks for sharing. I keep getting a cassette tray 1 error. It is saying to put it in correctly when I try to use a 11 by 17 paper. I can't close the cassette tray all the way so I don't understand what to do. Can you give me a tip to help me with this. Thanks in advance.
I'm just trying to find where I can designate which cassette I want to use. It is defaulting to cassette #1 but I want to just use cassette #2 (the bottom one) Haven't found anywhere to do that yet.
Thank you. Your video was truly a life saver. HELP PLEASE. I am not able to fit a 12x12 piece of paper in the tray. I measured the paper to verify the size which is correct. The width of the tray seems to be off; too small to fully accept the 12 in paper. It's a new printer and I can't believe it's flawed. Although I am expanding the width with the tabs, I must be doing something wrong. I have been able to get Epson support, that is why I am grateful for your video.
the newer WF printers has a max tray width of 11 in. this was the old WF trat. for 12 in on the newer Epson Wide Format Printers you have to use the rear feed.
I have at 16600 and when I fully extend the tray to fit in my paper, the cassette will not close. It seems to get caught, but only when it is extended out. It closes fine for the regular paper setting. Any advice?
@@HonestlySpINKing ..Thanks but not really understanding your response. Are you indicating that the 13 by 19 can be printed from the regular tray in the front? ...or does it have to be feed into the back portion of printer because of the size?
@@pink.ivy87 yes you put it in the tray in the front. I do not use the back at all. you adjust the tray as shown here and put your paper in. put the tray back in the printer.
Hi. When I use any paper size other than letter size. It’s telling me to insert cassette correctly bc it sticks out due to the paper size. What am I doing wrong?
I have a question. I just bought a USED WF 7110. IT'S NOT PRINTING, EVEN THOUGH THE MESSAGE ON THE COMPUTER SCREEN TELLS ME I CAN CHOOSE TO PRINT IN BLACK ONLY (since i have enough black ink), BUT IT STILL DOESNT PRINT ANYTHING. It shows it is missing CYAN, and MAGENTA.. (no ink on neither), do you think this should sove the problem? i hope this thing doesnt have blocked printheads (i've heard that kind of talk before), that need replacing, otherwise, i got SCAMMED. your input will be appreciated. THANKS!
Ms SpINKing, my EPSON 16600 keeps going for the REAR TRAY and wants GLOSSY. I just want it to print from the BOTTOM TRAY. I had that going on the MacMini, didn't think this MACBook would have issues. What's your best bet? BLUEY QUILTY AHQ RESEARCH & COPYRIGHT Australia
@@HonestlySpINKing : Will I find I only need to SELECT "PLAIN PAPER" & "A4" and the ET will go for the bottom tray? I recall something of the kind in an EPSON Support workers advice.
This try was from the older WF printers. The same adjust steps apply for all printer trays to adjust to whatever the max is for that particular printer. For the newer WF printer the max for the tray is 11x17
All of the Epson printers work this way to get to the max paper size the tray can hold. However this was fir the old WF printers. The new Epsonnprinters only go up to 11x17 in the trays and 13x19 is done from the rear feed
This is not how the WF 7840 works.. Anything larger than 11x17 has to go in the back feeder. -_- amazon listing said 13x19, nothing about not being able to load that in paper cassettes.. Debating on sending it back.. grrr
For Rolls of paper the max size is 12.95x47.24. YOU HAVE TO CUT IT DOWN TO SIZE!!! It will feed the full roll though if you do not cut it down to the size you need.
What printer did use in this video
@@SJHBoy3 7720
O ok thank you I will get tha same one shopping for a printer now…. Do u use a vinyl cutter machine
@@SJHBoy3 that printer is no longer manufactured. there are new models of wide format Epson WF printers..7820,7840 or 7310
@@HonestlySpINKing ok thanks what vinyl cutter machine u use
This was so helpful! I just got my Epson printer and honestly it’s my first printer and that lever I would have not know of without this video! Thank you! Glad you made this video.. and specifically for Epson printers!
I had a heck of a time trying to figure out how to load the 11x17 paper which is why I bought this printer in the first place. Even the "tech" center at Staples, where I bought it from, couldn't figure it out.
Thanks you very much Honestly SpinKing!
YOU are a lifesaver!!!! My dad does drawings and bought this EPSON WF-7840 specifically for the 11x17 capability in the tray. However, EPSON does NOT clearly describe how to expand the tray. I was panicking to say the least! So thank you so much for this video, it's the only one that I found that saved us. Take care!!!
This video was a LIFESAVER i was totally distraught that my A3 printer didn't work Thank you soooo much
Thank You! I get hitched on simple stuff and you let me in very time. Yes, the guide for my lower tray has a spring tensioned release and your video showed it in passing. You are the "1" in the "16600"!
Thank you . You answered my question on how to load 11x17 paper. SUBSCRIBED!
You literally saved me an aggravating day! Many, many thanks...
I really appreciate the time and effort that those like you put into sharing knowledge that most would not even think of. This really helped me to use legal with my new wide-format printer but, even more important, your video answered how I will use my custom cut paper, 13x19, for book printing. Thank you so much.
Thank you for this feedback and you are welcome. Which wide format priter did you get?
@@HonestlySpINKing I got the Epson WF-7840. I ordered a couple of cases of paper specially cut to 12.5x19 inches, based on it's original size. Then I will use my trimmer to get it to 12x17 for large format book printing. I'm looking forward to printing and binding out-of-print or hard-to-find classics from the European Enlightenment era just to enjoy for my own reading.
Thank you for that. I'm by no means tech challenged, but I was having trouble with tray 2 always being selected to print and all my paper was in tray 1...I now understand how to use the trays, and to tell the printer which one I wish to use for paper source. excellent video that explains well without fluff...thanks.
Thank you for creating this video, it helped me to print legal sized documents on my new epson printer. Much appreciated
Super helpful video, way better than the manufacturer's instructions. Thanks!
life saver of the day girl - thank you!
Thank God this video is still up. I struggled trying to load the 13x19 paper through the rear feed like all said to do. What a FAIL till I saw this vid. Thanks 👍
What model did you find to fit 11x13 in a cassette?
THANK YOU SOOOO MUCH. I was ready to toss it. Now to figure out quick printing and printing without it saying paper tray empty.
This was very helpful. I was having trouble printing Legal on a Epson ET 7700. After your video, I took another look and saw I could expand the cartridge. One note. If you do have paper that hangs over, you need to make sure it doesn't end up to far forward or the paper can jam.
Thank you soooo much. Just got a new ET8500 and was trying to figure it out.
Just what I needed can’t believe I’ve over worked myself
Thanks for explaining this with so much detail!! Thanks a million!!
Thank you very much.🙏
I was struggling and having to add a single sheet at a time through the back feed.
A life saver for sure! A million thanks for this.
This video is such a life saver! Thank you for sharing.
This was really helpful and really simple! thanks for the video, it saved me some stress.
Excellent info!!! I just got a WF 7820 so this is very helpful!!! Thank you!!!
🤗💚🤗💚🤗💚🤗💚🤗💚
For the paper larger than 8x11 how do I properly close the tray. When I close it the paper gets bunched up. Or, it will pull two pages through at once. I tried leaving it open but it states the tray is not properly closed.
My paper does that as well 😒
Mines to but I think that’s what this video is for!!! I so didn’t know I can adjust the tray 🤦🏾♀️... hopefully that will fix this feeding one at a time crap I hate so much 😂🙏🏾
Thanks for helping me sort out A3 paper loading. A pitty Epson don't make things a bit more obvious.
Your video was incredibly helpful ! Thank you sooooooo much 😁
Is this the Epson 7710 or 7720? Thanks
You wonderful, wonderful lady! Thank you! 😄
Thank you!
Thank you for sharing. This worked❤😊
thank you so much, was looking for exactly this!
Thank you! I was so frustrated until I saw your video! Now if I could just get the printer preference to work!
which printer do you have?
I have an Epson ET4700 can I use 8.5 x14 paper? I also have Silhouette Cameo 3.
I have the workforce pro WF4830 does it matter which size paper goes into which cassette does the 8 1/2 x 14 cassette close all the way
Thank you. Very clear and helpful.
Thank you for this!
Life saver! Thanks!
That was really helpful, thank you
Thank you Queen
What model are you using in the video? My new Epson 7840 won't fit 13x19 in either of the two front cassettes. I really don't want to have to use the back-feed as I'd have to rotate it off the wall every time I wanted to use it.
You have to extend your tray. I have a video on the channel. Visit the Epson playlist
Sorry. I thought this was on my video yesterday. Extend the tray just like this
The tray will extand out of the printer
@@HonestlySpINKing I have the 3640. My trays doesn't look like this.
@@Eatonsbodysculpting 3640 does not print wide format. you can not print 11x17 or 13x19
Thank you so very much!
Thanks for sharing. I keep getting a cassette tray 1 error. It is saying to put it in correctly when I try to use a 11 by 17 paper. I can't close the cassette tray all the way so I don't understand what to do. Can you give me a tip to help me with this. Thanks in advance.
Thank you. This was so very helpful
Does this work for the et-4700 or st-2000?
I'm just trying to find where I can designate which cassette I want to use. It is defaulting to cassette #1 but I want to just use cassette #2 (the bottom one) Haven't found anywhere to do that yet.
Great help
Thank you.
Very helpful video.. Thanks
Thank you. Your video was truly a life saver. HELP PLEASE. I am not able to fit a 12x12 piece of paper in the tray. I measured the paper to verify the size which is correct. The width of the tray seems to be off; too small to fully accept the 12 in paper. It's a new printer and I can't believe it's flawed. Although I am expanding the width with the tabs, I must be doing something wrong. I have been able to get Epson support, that is why I am grateful for your video.
the newer WF printers has a max tray width of 11 in. this was the old WF trat. for 12 in on the newer Epson Wide Format Printers you have to use the rear feed.
I have at 16600 and when I fully extend the tray to fit in my paper, the cassette will not close. It seems to get caught, but only when it is extended out. It closes fine for the regular paper setting. Any advice?
the tray does not close flush when using longer paper as the well under the printer is not that long. It will stick out for anything longer than 11in.
Nice! Nice!! Nice!!! Thanks.
Thanks for this tutorial....I have the Epson 7820. The 13 by 19 paper doesn't fit in the tray. Am I doing something wrong?
The tray will not close and be flush once adjusted to the longer paper
@@HonestlySpINKing ..Thanks but not really understanding your response. Are you indicating that the 13 by 19 can be printed from the regular tray in the front? ...or does it have to be feed into the back portion of printer because of the size?
@@pink.ivy87 yes you put it in the tray in the front. I do not use the back at all. you adjust the tray as shown here and put your paper in. put the tray back in the printer.
@@HonestlySpINKing ..thank you..I'll try again..the tray worked perfectly with the 11 by 17...I'll see if it let's me adjust it higher...
@@HonestlySpINKing what is the model of the printer that you use?
Very useful
THANK YOU SUPER HELPFUL.
Hello, what printer are you using for video
Epson 7720
Hi. When I use any paper size other than letter size. It’s telling me to insert cassette correctly bc it sticks out due to the paper size. What am I doing wrong?
I have the same problem.. Tje tray just hangs out and it wants it shut to print
Chelsea’s ArtGarden Hey. I unplugged from the back and made sure I pushed the cassette in til I hear and felt it snapped. It works now.
NaturalJay2012 hey what did you mean by unplug I’m having the same issue
What paper setting you u see for the 12x18 paper
Which printer do you have?
I have a question. I just bought a USED WF 7110.
IT'S NOT PRINTING, EVEN THOUGH THE MESSAGE ON THE COMPUTER SCREEN TELLS ME I CAN CHOOSE TO PRINT IN BLACK ONLY (since i have enough black ink), BUT IT STILL DOESNT PRINT ANYTHING.
It shows it is missing CYAN, and MAGENTA.. (no ink on neither),
do you think this should sove the problem?
i hope this thing doesnt have blocked printheads (i've heard that kind of talk before), that need replacing, otherwise, i got SCAMMED.
your input will be appreciated. THANKS!
I have the wf 4833 will that work for wide format or the epson Xp 5100...
If your printer is wide format and has an adjustable tray then yes
Can you guide how to print a3 card stock on this printer
Ms SpINKing, my EPSON 16600 keeps going for the REAR TRAY and wants GLOSSY. I just want it to print from the BOTTOM TRAY. I had that going on the MacMini, didn't think this MACBook would have issues.
What's your best bet?
BLUEY QUILTY
AHQ RESEARCH & COPYRIGHT
Australia
The bottom tray can not print that setting or any of the premium settings. Only the basic ones.
@@HonestlySpINKing : Will I find I only need to SELECT "PLAIN PAPER" & "A4" and the ET will go for the bottom tray?
I recall something of the kind in an EPSON Support workers advice.
Thanks helped me .
Does this work for EPSON 2720?
The 2720 does not have a tray. it only has a rear feed and only allows for prints 8.5 in wide. You can however print up to 47.24 in long
What printer is this?
I love you thank you!!!!!
do u have a tut on how to sub socks please help i cant figure it out
What Epson printer is this?
On the wf7840 can you print a 13x19? And how
Yes but only from the rear feed
What about 7820?
Which epson printer are you using?
This try was from the older WF printers. The same adjust steps apply for all printer trays to adjust to whatever the max is for that particular printer. For the newer WF printer the max for the tray is 11x17
how do you load the 13x19 papers in the tray?
If you have the newer WF (7820,7840,7310) 13x19 does not fit in the tray you have to use the rear feed/tray. And the "cassettes" are for up to 11x17
If you have the older WF just pull everything all the way out
Thank ya both 👍
Thank you
Will the epson ET 4760 print those sizes?
No it is a small format printer
8.5 wide but you can print up to 47.24 long
Does this apply to the Epson 2850?
No as that printer has a max print width of 8.5in
is this for all epson printers
Yes. However the newer ones only go up to 11x17 for 13x19 you have to use the rear feed
Will this work for a 7820?
yes however the 7820 only goes up to 11x17 from the front tray
Does anyone know how to print the 4x6
Can an epson 2720 take 13x19 size paper??
No
Thanks so much, was panicking over my new printer as the info provided said nothing about how to fit in A3
What printer is this
All of the Epson printers work this way to get to the max paper size the tray can hold. However this was fir the old WF printers. The new Epsonnprinters only go up to 11x17 in the trays and 13x19 is done from the rear feed
subscribed!!!!!!
How to close??? I loaded it with legal size but it doesn't close properly, the paper rolls
If by close you mean have the end flush with the printer like it does with letter size paper ...you cant. The tray will stick out froam the printer.
I need help it says” paper out in the rear paper feed confirm the size size and load paper”
Name of the printer please
just got my 1600 still trying to load my paper 8x12
I am having to load one sheet at a time is this common?
no
@@HonestlySpINKing ok I have to figure it out can you do a segment on settings for sublimation printing if you can
@@LDot165 i have several videos with that info for the settings i use
@@LDot165 I use Premium Presentation Matte Standard color controls Adobe RGB Gamma 1.8
WHAT TYPE OF PRINTER IS THIS
Epson 7710,7720,7210 or any of the wide format Epson printer
Omg are u serious and I'm searching for a more expensive printer thank you
This is not how the WF 7840 works..
Anything larger than 11x17 has to go in the back feeder. -_-
amazon listing said 13x19, nothing about not being able to load that in paper cassettes..
Debating on sending it back.. grrr
Correct. I now have a 7840 and I hate that about it but you still need to know how to do this for 8.5x14 to 11x17
But I can’t find a single video to show me how to take tray OUT😩
♡♡♡♡
thank you !
I have the epson et-4800, how do I change it to print 13x19
That model does not print that wide. You can only print 8.5in wide but upto 47in long
Thank you