Tutorial resin epoxy pyramid ~ smoky effet

I made these pieces last night just for fun , and I have recorded the process so you may see how these are made , and you may do much better than me 😍💜
#resinart #resinpyramid #resinepoxy

[@ameliarodrigues9124]

Wow they are all amazing

[@vivilee705]

Thank you very much ❤😍

[@iwonascreations6144]

All your pyramids are unique and very beautiful 😍💜

[@lorrainebateman8799]

Stunning! ❤️👍

[@Aangel452]

Very pretty😀

[@sherron44]

Where did you get your small pyramid molds? I ordered small ones and they are not straight sided.

[@EmberDione]

Hi! I just wanted to say - thank you so much for posting your videos! I kept having this issue with Alcohol Inks in my resin projects and NO ONE ELSE seemed to have the same problem (my inks were sinking to the bottom and not curing properly despite not using sinker ink!). Then you EXPLAINED IT!!! Thanks! (I need to mix them with a little bit of resin before pouring them in for the smokey effect!)

[@vivilee705]

Thank you for your comments herewith❤ 😃, however , I use regular resin dye in this video and I didn’t use alcohol ink here 🥹, so I am not sure whether it would lead to the same result or not , let me know after your new try ~ 🩷👍

[@EmberDione]

IT TOTALLY WORKED. XD I am using alcohol inks that are marketed AS a dye for Resin, but they sink too fast for the resin so I end up with wet pools of uncured mess at the bottom of the mold. BUT in your video you mix the dye you want to "swirl" with resin first, just a tiny bit - which is the step I was missing. I went back to other videos and MOST people do the same thing they just don't mention it! XD@@vivilee705

[@nereidahenriquez]

Hermoso tu trabajo, gracias por compartirlo y darnos ideas para hacer las pirámides en resina. Cuanto tiempo dejar secar entre capas?

[@vivilee705]

Thank you for your appreciation ❤ the timing between the 2 layers depends on your resin and your temperature, sometimes the depth of the pour would matter too. In my video I waited about 2 -3 hours between ;)

[@mywifetheartist]

So pretty. ❤❤❤

[@vivilee705]

Thank you 😍🩷🙏

[@soulelee]

The video moved a bit too fast to see what products you were actually using. What are glass bubbles? Thanks for sharing.

[@vivilee705]

Perles à Bulles de Verre Mini Perles à Bulles Petites Perles Rondes Non Poreuses Perles à Bulles de Gouttelettes D'eau pour la Fabrication de Résine et les Arts des Ongles amzn.eu/d/ff0q6w1

[@annadziewanna9250]

Thanx for your answer Vivi. I also found mini glass bubbles named as decoupage snów effect bubbles

[@fairyspunfibers9098]

@missy soule
Just slow down the video. I used ½ speed. 😊

[@soulelee]

@@fairyspunfibers9098 Thanks for your reply. I didn't even know I could do that!

[@judeediehl]

@@annadziewanna9250 did you find on USA Amazon? Still looking for them

[@noreasonjustresin]

Wow!! So amazing and fun. Great tutorial. I might have to try this now!

[@deborahnoble7361]

these are lovely beautiful job

[@carljohnson5253]

Hello, I love your work, I only hope to be able to create such beautiful pieces. Would you mind sharing the brand of resin you use? Mine is curing way too fast.
Thanks

[@vivilee705]

The resin I used to use is just ok , I think every brands are mostly the same , but we just need to be careful of the portion .

[@Meagain921]

Thank you……some good tips. Lovely effects. Subscribed.

[@vivilee705]

Thank you for your encouragement 🥹❤️💕

[@Trina7594]

Amazing!!!

[@vivilee705]

Thank you dear 🩷🫶😘

[@IYAOYAS6969]

9:40, 10:11, 11:04 are my favorited WOW

[@elchuppacabra2371]

Bonjour , travail et rendu magnifique !!👌 cependant comment faites-vous pour que toutes les couleurs et les formes structurées ne se délitent pas dans les mélanges ??! 🤔

[@vivilee705]

Bonjour, c’est pour cette raison que j’ai mis une phrase dans ma vidéo « 2 hours later » ce qui veut dire qu’il faut attendre que le résine soit un peu épaissis , et on ajoute la couleur et on fait le technique « swirl » à ce moment là .
Merci pour votre commentaire 🩷🫶🍀

[@elchuppacabra2371]

D’accord , merci beaucoup d’avoir pris le temps de me répondre 👍 cependant je pense qu’il y a une information très importante à prendre en compte et souvent omise…, la température du mélange ! A ce sujet , à quelle température de résine précisément, faut il faire les mélanges de couleurs ? ( car chez moi même plusieurs heures après , malgré toutes les recommandations d’usage, mes couleurs se mélangent complètement et mes créations sont ruinées…. ) donc je pense qu’il y a d’autres aspects à prendre en compte et qui ne sont pas forcément énoncés …. Je vous serais très reconnaissant de bien vouloir me donner les meilleures conseils et astuces techniques le plus détaillés à ce niveau là car , étant très passionné par la résine , je désespère littéralement d’arriver un jour à obtenir un degré de perfection similaire à vos créations qui sont absolument magnifiques !!! Merci par avance !! 👌

[@fairyspunfibers9098]

Really pretty! You have good color sense. 😊 I also like the Petri effect on the ones where you used the sinker white. Not too much, not too little...just right! I often use too much. 😊😁 I noticed you waited about 2 hours before dropping in the alcohol inks and sinker white. Is that because your resin is a thinner, long-cure resin?
New sub, here. 😊👍

[@vivilee705]

Thanks for your kind message ❤ in this video I didn’t use any alcohol ink, so there is no sinker either , everything is with regular resin pigments🥹. My resin is not a deep pour resin , I waited 2 hours is to avoid the colors drop down too much to the bottom end 🥹 hope this info helps❤️

[@fairyspunfibers9098]

Ah, my mistake, Vivi! I thought you used sinker white. I need to rewatch this! Thanks for replying! 😊👍

[@MyleneBreem]

What kind of resin do you use 5cm and more or less than 2cm please? It's beautifull

[@vivilee705]

I use this brand « Resin Pro » an italien brand , it’s said to pour not more than 2.5cm but I often pour more than that 😅

[@eddievalenzuela3009]

Is it a slow cure? If I pour that much after 2 hours it's way too cured to do that...by slow I mean like72hours or more

[@vivilee705]

@@eddievalenzuela3009 it’s a regular classic epoxy resin which cures in 24 hours.

[@sindymccormick3045]

What did you mix the alcohol ink and mica powder with, was it resin the clear liquid?

[@vivilee705]

It’s clear resin …😄 after mixing the resin you take small amount ( like 2-3 drops ) for each color you want to add to your projet .

[@mothersofmurderedsonsandda3886]

Hey I a new sub...

[@annadziewanna9250]

I am also interested in the glass bubbles. Could you say the name please

[@vivilee705]

Perles à Bulles de Verre Mini Perles à Bulles Petites Perles Rondes Non Poreuses Perles à Bulles de Gouttelettes D'eau pour la Fabrication de Résine et les Arts des Ongles amzn.eu/d/ff0q6w1

[@katielyb]

I would stray away from mixing shades of green with shades of orange, red, purple, and pink because it turns muddy, or brownish. That's my personal opinion really but, i thought i should mention it.

[@vivilee705]

You are absolutely right 😄 I didn’t have enough experience to choose the right colors mixing , and I will keep on trying from mistakes 😄

[@LaurenceLegrand-tz9jq]

Dommage pour un tutoriel que la vidéo soit en accélére impossible de comprendre et voir correctement ce que vous faite il aurait mieux valeur faire une seule pyramide et bien expliquer les étapes

[@vivilee705]

Bonjour, vous pouvez très bien ralentir la vidéo en cliquant le bouton sur le haut a droit de votre écran .
Je vous souhaite très bon après midi ❤